Ready for shipping, we have taken the 370Z oil cooler system to the next level by making you, the consumer, the one who decides what you want for your oil
|
|
LinkBack | Thread Tools | Display Modes |
12-18-2009, 12:43 PM | #1 (permalink) |
The370Z.com Sponsor
Join Date: Jun 2009
Location: NLA
Posts: 1,313
Drives: NLA
Rep Power: 18 |
Introducing Z1 Motorsports 370Z Oil Cooler Kit *Customizable*
Ready for shipping, we have taken the 370Z oil cooler system to the next level by making you, the consumer, the one who decides what you want for your oil cooler kit!
Unlike other, similar oil cooler kits where you are only offered 1 line type with 1 particular oil cooler. The Z1 Motorsports 370Z Oil Cooler kit allows you to choose from a variety of options to custom tailor the oil cooler to your specifications depending on your intended driving scenarios, geographic location and other modification installed. The heart of any oil cooler system is the oil cooler's core. In the Z1 Motorsports package, we went straight to the experts and chose to use a Setrab oil cooler core in your choice of 3 different sizes: 19 row; 25 row; or 34 row. The Setrab 6 series core is well known in many racing applications and features the following benefits:
The Core dimensions and recommended applications are as follows below: 19 Row (13" x 1 1/4" x 5 1/3") -- Recommended for most light street applications or applications in colder climates where less cooling is required. Will work with all aftermarket intakes. 25 Row (13" x 1 1/4" x 7 1/2") -- Recommended for more intense applications where occasional track use will be seen, also for more moderate climates. Will work with most aftermarket intakes. 34 Row (13" x 1 1/4" x 10 1/4") -- Recommended for forced induction applications, serious track applications, or in high temperature climates where extreme conditions may exist. This is our best selling cooler but it will require modifications to install with some intake systems, will not work with Stillen Gen 3 intakes without relocating cooler. NISMO 370Z owners will have to do some minor modifications to the front chassis dampner in order to install this cooler. The next key part to any oil cooler system is the Oil Lines. Using -10 Stainless Steel Braided. All of the Lines feature high quality aluminum -10 AN fittings, making for a leak proof and durable system. For the oil filter sandwich adapter, we again called upon one of the leading fluid transfer experts and supplied all of out kits with Mocal Sandwich adapters, available in both Thermostatic and Non-Thermostatic variations. Kits include all of the necessary mounting hardware, fasteners, brackets and necessary installation manual*. Kit prices start at $398.00 plus shipping. You may find the Z1 Motorsports Oil Cooler Kit on our website here: Z1 Motorsports 370Z Oil Cooler Kit Last edited by Dustin@Z1; 06-03-2010 at 02:18 PM. |
06-03-2010, 02:18 PM | #2 (permalink) |
The370Z.com Sponsor
Join Date: Jun 2009
Location: NLA
Posts: 1,313
Drives: NLA
Rep Power: 18 |
After much success with the original design, we have now upgraded/revised the Z1 Motorsports 370Z Oil Cooler Kit to now include all Mocal products. As an added benefit, we are also offering these kits with NEW LOWER PRICES!
The Base (19 row Oil Cooler Core without the Mocal Thermostatic Sandwhich Adapter plate is now $398 plus shipping. Our most popular oil cooler configuration that offers the optimum amount of cooling and day to day streetability is our 25 Row Cooler with the Mocal Thermostatic Plate which lists for $538 plus shipping. For Supercharged or Twin Turbo applications, our 34 row oil cooler kit is a MUST! With the temperatures already an issue on 370Z's that are pushed to the limit in stock trim, the added heat generated by the F/I Package only compounds the problem. Keep you oil running cool and lubricating like you and your engine needs it to! The kits start at $598 for Non-Thermostatic kits and go up to $638 for Thermostatic equipped kits. As promised, the full instruction manual for the Z1 Oil Cooler Kit can now be pre-viewed online on our website by clicking on the link at the bottom of the Z1 Motorsports Oil Cooler Kit product page. The Z1 Motorsports 370Z Oil Cooler kit can be found on our website here: Z1 Motorsports 370Z Oil Cooler Kit Last edited by Dustin@Z1; 06-03-2010 at 03:35 PM. |
09-03-2010, 05:02 PM | #3 (permalink) |
The370Z.com Sponsor
Join Date: Jun 2009
Location: NLA
Posts: 1,313
Drives: NLA
Rep Power: 18 |
We have done it again! After negotiations with our supplier, we have been able to further reduce the prices of our 25 and 34 row oil cooler kits by an additional $30 for the 25 row kit and $40 on the 34 row kit.
At the same time, we have over-hauled our installation manual with more detailed images and instructions [based on the suggestions of the the370z.com forum members]. And for the hat trick....we are now introducing a new, protective sheathing that is both form fittings are very durable. The sheathing does not add the additional bulk and weight of a heater hose and MUCH more wear resistant that plastic split loom. We are now offering this pre-installed for an additional $25. * Please note: Actual length of the protective line sheathing will vary from the image shown. Kits are instock and ready to ship! To take a look at the Z1 Motorsport Oil Cooler Kits on our website, or to view any other products we offer, feel free to browse our website: Z1 Motorsports 370z Oil Cooler Kit Z1 Motorsports - Nissan & Infiniti Specialists Last edited by Dustin@Z1; 09-03-2010 at 05:38 PM. |
09-05-2010, 01:43 AM | #4 (permalink) |
RIP Tony :( (1969-2015)
Join Date: Feb 2009
Location: Northern Virginia
Posts: 18,802
Drives: '14 Mustang GT/CS
Rep Power: 67 |
Something tells me I might have to purchase one of these during Z Nationals!
__________________
SpinTech Mufflers, Airaid CAI, JBA H-Pipe, Lethal Performance Over Axle Pipes, MMD Quarter Panel Louvers, Cervini's Ram Air Type IV Hood, Carbon Fiber Radiator Cover, GT500 Rear Valance, Quad Exhaust Tips
|
09-08-2010, 03:15 PM | #5 (permalink) | |
The370Z.com Sponsor
|
Quote:
Thanks for the free ad in your sig
__________________
Z1 Motorsports will beat any advertised price on Nissan OEM Parts!
www.370ZParts.com (770) 838-7777 x303 -- Josh@Z1Motorsports.com -- AOL IM - JoshAtZ1 |
|
09-09-2010, 08:22 AM | #6 (permalink) |
RIP Tony :( (1969-2015)
Join Date: Feb 2009
Location: Northern Virginia
Posts: 18,802
Drives: '14 Mustang GT/CS
Rep Power: 67 |
Wow! Those are some awesome giveaways!
__________________
SpinTech Mufflers, Airaid CAI, JBA H-Pipe, Lethal Performance Over Axle Pipes, MMD Quarter Panel Louvers, Cervini's Ram Air Type IV Hood, Carbon Fiber Radiator Cover, GT500 Rear Valance, Quad Exhaust Tips
|
11-10-2010, 01:05 PM | #7 (permalink) |
Base Member
Join Date: Jun 2010
Location: Carrollton
Posts: 91
Drives: Varies
Rep Power: 15 |
Just received more cores and lines. Everything is ready to go!
Don't forget the thermostatic sandwich plate. It will help the oil reach operating temperatures sooner in the cold weather. Oil that never gets up to operating temperature can also be damaging just like oil that gets too hot. |
04-18-2013, 12:38 PM | #8 (permalink) |
Base Member
Join Date: Oct 2010
Location: Hiram, GA
Posts: 83
Drives: 2011 370Z track rat
Rep Power: 15 |
Stay cool with Z1 Oil cooler kits!
|
11-03-2013, 09:06 AM | #9 (permalink) |
Base Member
Join Date: Oct 2013
Location: NOLA
Posts: 51
Drives: 09' 370Z 6MT
Rep Power: 12 |
Looking into an oil cooler. Saw my temp go to 240ish last night, its normally over 200 anyway.
Im in South LA, roughly 20miles west of New Orleans. we get hot days (85-100mostly) and a short, not very cold winter (50s). I plan to do some light tracking, but I do drive with a bit of spirit nearly all the time. I would like a recommendation and a price for that kit shipped to 70070, w/protective wrap for the lines. Mike |
11-05-2013, 12:44 PM | #10 (permalink) | |
The370Z.com Sponsor
|
Quote:
__________________
Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com |
|
03-02-2014, 06:32 PM | #11 (permalink) |
Base Member
Join Date: Dec 2013
Location: Puerto Rico
Posts: 25
Drives: 2010 Nissan 370z
Rep Power: 11 |
Im looking for a recommendation, I live in the caribbean... Temp is usually 85 to 100, its never common to be lower than 70 degrees. Is there a difference between Mocal and Setrab, do i really need a thermostatic plate in 365 days warm weather?
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler | Dustin@Z1 | Engine & Drivetrain | 158 | 03-10-2014 03:27 PM |
GT Motorsports: GTM Rear Differential Cooler Kit | George@GTM | Engine & Drivetrain | 21 | 11-07-2013 06:53 PM |
DIY: GT Motorsports Oil Cooler Kit Install/Review | rackley | DIY Section (Do-It-Yourself) | 28 | 03-10-2010 11:38 AM |
GTM Motorsports Oil Cooler | Denny McLain | Engine & Drivetrain | 40 | 09-14-2009 02:55 PM |
Nissan Motorsports Oil Cooler Now Available @ Z1 Motorsports | Dustin@Z1 | Z1 Motorsports | 1 | 08-26-2009 06:51 PM |