Square setup questions?

KingRich · 09-08-2014, 10:27 PM

I've been searching for different square setups and I haven't really found what I'm looking for, I want to run 18x10.5 Enkei rpf1 on all 4 corners with equal size tires on all 4. I do not track or race but have the occasional spirited late night drive home, My question is would 18x10.5 plus 15 fit on all four corners with out any issues if not what setup would you guys recommend, Thanks for the help..

DEpointfive0 · 09-08-2014, 10:40 PM

Hell no won't fit the front.

KingRich · 09-08-2014, 10:56 PM

any suggestions tho, I've seen plus 28 up front but I cant find anyone selling plus 28 rpf1

Trips · 09-08-2014, 11:58 PM

Dont know how much this will help?

Square Setup 18x10 25mm Offset

KingRich · 09-09-2014, 12:05 AM

Thank you trips I've snooped on that post before and several like it.
I guess I have to run 18x10.5 plus 28 front and plus 15 rear, Now its just finding a seller with plus 28 I can't seem to find those anywhere...

PharmDZ · 09-09-2014, 12:26 AM

I ran PF01's 18x10.5 front/rear, with +38 offset front (and a 10mm spacer, so +28) and +15 rear, but it seems like you knew those offsets are necessary already. Good luck!

KingRich · 09-09-2014, 12:40 AM

I've been doing my research for the past couple of months, I've been trying to avoid spacers. Nothing against spacers at all but I just didn't want to go that route but I guess with rpf1 I don't have a choice in the matter since Enkei doesn't make a +28...
Any suggestions on 10mm spacers?

And sorry for slow respond I had to walk my dogs

chops · 09-09-2014, 12:45 AM

Quote:

Originally Posted by KingRich

I've been doing my research for the past couple of months, I've been trying to avoid spacers. Nothing against spacers at all but I just didn't want to go that route but I guess with rpf1 I don't have a choice in the matter since Enkei doesn't make a +28...
Any suggestions on 10mm spacers?

And sorry for slow respond I had to walk my dogs

get the cheapest spacers (Z1's CNC machined spacers) with quality extended lugs (nismo or ARP)

KingRich · 09-09-2014, 12:52 AM

Thanks Chops, I'll look into that a tad bit further I have a bad problem with doing a crap ton of research before buying car parts..

HEK · 09-09-2014, 02:56 AM

Why are spacers illegal in MA...?

KingRich · 09-09-2014, 11:20 AM

Quote:

Originally Posted by HEK

Why are spacers illegal in MA...?

Pennsylvania - spacers thicker than 1/4" are banned (Title 67 of the PA Code)

essentially you cannot use spacers to attain wheel track.

09-08-2014, 10:27 PM	#1 (permalink)
KingRich Base Member Join Date: Aug 2014 Location: orlando Posts: 13 Drives: 2009 370z Rep Power: 11	Square setup questions? I've been searching for different square setups and I haven't really found what I'm looking for, I want to run 18x10.5 Enkei rpf1 on all 4 corners with equal size tires on all 4. I do not track or race but have the occasional spirited late night drive home, My question is would 18x10.5 plus 15 fit on all four corners with out any issues if not what setup would you guys recommend, Thanks for the help.. Last edited by KingRich; 09-08-2014 at 11:29 PM.

09-08-2014, 10:40 PM	#2 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Hell no won't fit the front. kenchan likes this. __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

09-08-2014, 11:58 PM	#4 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,730 Drives: 🔰 Rep Power: 10	Dont know how much this will help? Square Setup 18x10 25mm Offset __________________

09-09-2014, 02:56 AM	#10 (permalink)
HEK Enthusiast Member Join Date: Apr 2009 Location: WESTFIELD, MA Age: 66 Posts: 491 Drives: '13 Z Tour Sports 6m Rep Power: 660	Why are spacers illegal in MA...? Last edited by HEK; 09-09-2014 at 06:45 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Square Setup???	Rangerz	Track / Autocross / Drifting / Dragstrip	17	12-28-2015 11:48 PM
19 inch square setup	lhinojos	Wheels & Tires	11	03-24-2015 12:49 PM
[FOR SALE] Vossen CV3 Square Setup	NOFATCHX	Parts for sale (Private Classifieds)	32	03-16-2015 09:21 PM
Running a square 10.5 +30 setup?	Kayzee	Wheels & Tires	13	04-15-2013 12:29 AM
Staggered or square setup?	sojirovskensi	Nissan 370Z General Discussions	34	07-30-2012 05:28 AM

09-08-2014, 10:56 PM	#3 (permalink)
KingRich Base Member Join Date: Aug 2014 Location: orlando Posts: 13 Drives: 2009 370z Rep Power: 11	any suggestions tho, I've seen plus 28 up front but I cant find anyone selling plus 28 rpf1

09-09-2014, 12:05 AM	#5 (permalink)
KingRich Base Member Join Date: Aug 2014 Location: orlando Posts: 13 Drives: 2009 370z Rep Power: 11	Thank you trips I've snooped on that post before and several like it. I guess I have to run 18x10.5 plus 28 front and plus 15 rear, Now its just finding a seller with plus 28 I can't seem to find those anywhere...

09-09-2014, 12:26 AM	#6 (permalink)
PharmDZ Track Member Join Date: Jul 2012 Location: New Jersey Posts: 997 Drives: 11 Nissan 370Z BS M6 Rep Power: 14	I ran PF01's 18x10.5 front/rear, with +38 offset front (and a 10mm spacer, so +28) and +15 rear, but it seems like you knew those offsets are necessary already. Good luck!

09-09-2014, 12:40 AM	#7 (permalink)
KingRich Base Member Join Date: Aug 2014 Location: orlando Posts: 13 Drives: 2009 370z Rep Power: 11	I've been doing my research for the past couple of months, I've been trying to avoid spacers. Nothing against spacers at all but I just didn't want to go that route but I guess with rpf1 I don't have a choice in the matter since Enkei doesn't make a +28... Any suggestions on 10mm spacers? And sorry for slow respond I had to walk my dogs

09-09-2014, 12:52 AM	#9 (permalink)
KingRich Base Member Join Date: Aug 2014 Location: orlando Posts: 13 Drives: 2009 370z Rep Power: 11	Thanks Chops, I'll look into that a tad bit further I have a bad problem with doing a crap ton of research before buying car parts..