Question

Bigviet23 · 12-27-2012, 12:34 PM

Looking at 18x9.5 35 offsets, square set up. I have 20mm spacers on now. Will I have any issues with the fitment?

tu_clean · 12-27-2012, 01:07 PM

Depends on the size tires you are going to run and what kind of drop you have.

Bigviet23 · 12-27-2012, 01:12 PM

Maybe 255/45 all around. Dropped on Eibach springs

DEpointfive0 · 12-30-2012, 06:07 AM

Quote:

Originally Posted by Bigviet23

Maybe 255/45 all around. Dropped on Eibach springs

Camber? (Btw have you gone to any of the local meets?)

Bigviet23 · 12-30-2012, 09:37 AM

Quote:

Originally Posted by DEpointfive0

Camber? (Btw have you gone to any of the local meets?)

No camber and I haven't been to one but I want to

DEpointfive0 · 12-30-2012, 12:45 PM

Quote:

Originally Posted by Bigviet23

No camber and I haven't been to one but I want to

I'm gonna assume your camber all the was on Swifts is going to be like 2.5 degrees on swifts, lemme look it up and reply in a bit

Mike · 12-30-2012, 02:19 PM

should be fine. i run 9.5+46 with 285s with no problem and 10 +34 also with no problem. need the spacer on the rear to push them out though.

12-27-2012, 12:34 PM	#1 (permalink)
Bigviet23 Base Member Join Date: Dec 2011 Location: Dallas (Allen now) Posts: 237 Drives: 2009 MB manual Rep Power: 13	Question Looking at 18x9.5 35 offsets, square set up. I have 20mm spacers on now. Will I have any issues with the fitment? __________________ My slow build http://www.the370z.com/members-370z-...ar-so-far.html

12-27-2012, 01:07 PM	#2 (permalink)
tu_clean Track Member Join Date: Dec 2008 Location: Norcal Posts: 527 Drives: 10' Nismo 370z Rep Power: 17	Depends on the size tires you are going to run and what kind of drop you have. __________________ SSR http://www.ssr-wheels.com/ Tanabe http://www.tanabe-usa.com/ ARK http://www.arkperformance.com/ TOYO Tires http://toyotires.com/

12-27-2012, 01:12 PM	#3 (permalink)
Bigviet23 Base Member Join Date: Dec 2011 Location: Dallas (Allen now) Posts: 237 Drives: 2009 MB manual Rep Power: 13	Maybe 255/45 all around. Dropped on Eibach springs __________________ My slow build http://www.the370z.com/members-370z-...ar-so-far.html

12-30-2012, 02:19 PM	#7 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	should be fine. i run 9.5+46 with 285s with no problem and 10 +34 also with no problem. need the spacer on the rear to push them out though. DEpointfive0 likes this. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Newbie Question... smart key question	ellebycul	New Forum Member	3	05-01-2011 06:04 PM