Major offset issue..for square setup.

weebs25 · 07-30-2021, 10:18 AM

Hey all..put a post up 6 months ago discussing this and placed an order. They arrived after a 6 month wait and here are the results. Can I get some help? Was trying to run square 18s and have a full spare, so all the same offset with spacers. Surely don’t need them! I can return them for a hell of a hit and a long *** wait. Shouldn’t a +25 tuck a tiny bit, not stick out a ton?!

JARblue · 07-30-2021, 10:55 AM

That doesn't seem right. What does the sticker on the wheel say?

weebs25 · 07-30-2021, 10:57 AM

They said the wheel says +25 on all 4 but the car is hanging As well. They want verification I want my tires put on

JARblue · 07-30-2021, 11:08 AM

Still seems excessive. While it's on the lift, put another floor jack on the bottom of the knuckle and raise up the hub to get a better idea of the fitment.

k67p67 · 07-30-2021, 08:12 PM

Width and offset are almost identical to a Nismo rear wheel. What's your suspension look like? Fronts should be fine with a bit of camber and fender tab trimming.

weebs25 · 07-30-2021, 11:26 PM

They sent me these pics and told me they will stick out and need a ton of camber..I gave them the go and here are my results. I do have a 20 mm spacer to toss in the rear if I want. They didn’t install it. It was a pretty unnecessary cause of panic lol glad my order was right I waited 6 months!

Brendan · 07-30-2021, 11:41 PM

Yes that will poke without the camber. Depending on the tire they will start to tuck at around -3. It's a little aggressive but your tires should still wear evenly so long as the toe is minimal. Out back 20mm might be a bit much depending on camber and tire size.

OptionZero · 08-02-2021, 02:38 PM

Unlikely, but i wonder if Enkei might have ****** up and sent 18x10.5 +15 instead. That appears to be a size available on their website

Did you swap all four wheels into different positions to see if they fit identically? If there's any discrepancy, there's your problem

That does seem to poke out alot for 10.5 +15

mikesnismo19 · 09-19-2021, 08:21 PM

Wow, im no expert but thats more than I expected with +25. My LMGT4s that are coming are +15, now im worried

I think a spacer on the back would look good

OptionZero · 09-23-2021, 01:22 PM

the original poster never got back to us so we don't know what his issue was

I personally run 20x11 +15 in the front so . . . i can tell you it can be do

Your 9.5 or 10.5 +15 Nismos are also doable

with camber

joeroke · 09-23-2021, 01:55 PM

Im running 20x10.5 offset of 25 front and rear but with a 15mm spacer in the rear. Pulled them off my Q60

weebs25 · 11-08-2021, 04:36 PM

Holy crap guys I didn’t realize I left this thread all hanging. The wheels fit great with no need for the panic. Order was correct. I tossed a 15mm spacer on the rear

Ventruck · 11-16-2021, 08:31 PM

Looks good dude, more so you're puttin the set to work.

weebs25 · 11-17-2021, 09:26 PM

Going to hit it extra hard next year…have a Wavetrac sitting right now with a z1 csc elimination kit..z1 diff kit…all in my garage and my gtm stage 2 sc arrives tomorrow!! Next year will wreck these tires.

07-30-2021, 10:55 AM	#2 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	That doesn't seem right. What does the sticker on the wheel say? Hotrodz likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

07-30-2021, 11:08 AM	#4 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Still seems excessive. While it's on the lift, put another floor jack on the bottom of the knuckle and raise up the hub to get a better idea of the fitment. cv129 and Memphis370Z like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

07-30-2021, 08:12 PM	#5 (permalink)
k67p67 Enthusiast Member Join Date: Oct 2016 Location: Rancho Cucamonga, CA Posts: 304 Drives: 2017 Nismo Tech 6MT Rep Power: 3937	Width and offset are almost identical to a Nismo rear wheel. What's your suspension look like? Fronts should be fine with a bit of camber and fender tab trimming. __________________ 2017 370Z Nismo Tech 6MT PART OUT IN PROGRESS Work \| Motordyne \| Powertrix \| Swift \| Michelin \| Takeda \| Hotchkis \| RJM \| Voodoo13 \| SPL \| SPC \| Z1 Motorsports \| ZSpeed \| Morimoto \| Craft Square

08-02-2021, 02:38 PM	#8 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	Unlikely, but i wonder if Enkei might have ****** up and sent 18x10.5 +15 instead. That appears to be a size available on their website Did you swap all four wheels into different positions to see if they fit identically? If there's any discrepancy, there's your problem That does seem to poke out alot for 10.5 +15 JARblue likes this. __________________ OptionZero Build Thread

09-19-2021, 08:21 PM	#9 (permalink)
mikesnismo19 Base Member Join Date: Sep 2018 Location: Saskatchewan Posts: 7 Drives: 2019 370Z Nismo M6 Rep Power: 7	Wow, im no expert but thats more than I expected with +25. My LMGT4s that are coming are +15, now im worried I think a spacer on the back would look good Last edited by mikesnismo19; 09-19-2021 at 08:22 PM. Reason: Adding comments

07-30-2021, 10:57 AM	#3 (permalink)
weebs25 Base Member Join Date: Mar 2013 Location: mn Posts: 220 Drives: 09 black mt Rep Power: 3367	They said the wheel says +25 on all 4 but the car is hanging As well. They want verification I want my tires put on

07-30-2021, 11:41 PM	#7 (permalink)
Brendan Track Member Join Date: Apr 2013 Location: Colorado Posts: 642 Drives: Poor man's Porsche Rep Power: 542	Yes that will poke without the camber. Depending on the tire they will start to tuck at around -3. It's a little aggressive but your tires should still wear evenly so long as the toe is minimal. Out back 20mm might be a bit much depending on camber and tire size.

09-23-2021, 01:22 PM	#10 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	the original poster never got back to us so we don't know what his issue was I personally run 20x11 +15 in the front so . . . i can tell you it can be do Your 9.5 or 10.5 +15 Nismos are also doable with camber __________________ OptionZero Build Thread

09-23-2021, 01:55 PM	#11 (permalink)
joeroke Base Member Join Date: Aug 2013 Location: Florida Posts: 8 Drives: nissan Rep Power: 12	Im running 20x10.5 offset of 25 front and rear but with a 15mm spacer in the rear. Pulled them off my Q60

11-16-2021, 08:31 PM	#13 (permalink)
Ventruck Track Member Join Date: Jun 2016 Location: California Posts: 785 Drives: '13 Sport+Touring M6 Rep Power: 22898	Looks good dude, more so you're puttin the set to work.

11-17-2021, 09:26 PM	#14 (permalink)
weebs25 Base Member Join Date: Mar 2013 Location: mn Posts: 220 Drives: 09 black mt Rep Power: 3367	Going to hit it extra hard next year…have a Wavetrac sitting right now with a z1 csc elimination kit..z1 diff kit…all in my garage and my gtm stage 2 sc arrives tomorrow!! Next year will wreck these tires.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Square setup?	longlivethez	Wheels & Tires	10	04-19-2019 08:44 PM
Help PLEASE! - Yaw Sensor Switch Major issue	sschaffer27	DIY Section (Do-It-Yourself)	13	05-31-2016 07:44 AM
major issue with AEROJACKET.... anyone heard from them lately or had similar issue??	DRFTR	Nissan 370Z General Discussions	158	02-18-2016 02:28 PM
WTB: 18" square set up UNDER 22 offset light wheels	NoQuestionZ	Wanted	6	05-21-2014 12:47 AM
Square Setup 18x10 25mm Offset	ResIpsa	Track / Autocross / Drifting / Dragstrip	20	11-19-2012 01:46 PM