NEW! Nismo LMGT4 19-inch ver.

OptionZero · 12-12-2019, 12:15 PM

New release, apparently limited production:

Nismo LMGT4
Made by Rays Engineering
Forged, one-piece
They are normally available only in 17 and 18 inch, most recently in "Omori Factory Spec". I think one year they were matte black and another they were gloss black.

Nismo previously produced this wheel through Rays in 17 and 18 inch sizes with VERY LIMITED AND CRAPPY sizes in 19, some of which were not available through Nismo USA.

The new version has an engraved NISMO logo, some lip, and concave face. The only 19's had no lip, only slight concave face, and no engraved logo, instead using a sticker. The best size might have been 19x9.5 +30, which is garbage.

The choice to only issue two sizes is pretty interesting. They will work for most Z owners that don't want to run super aggressive sizes. A simple 9.5/10.5 stagger at +12 offset will poke a little bit in front. 265/35 and 305/30 would be ideal. 285/30 and 325/25 might require camber adjustment - definitely in front.

While these wheels are spectacular looking, and i would LOVE a set if I had a 350Z, Z32, or GTR (non-R35), they don't go aggressive enough personally, but i am apparently a nutjob.

At $800/wheel these are not cheap but they are high end, limited NISMO goodies, so if you're looking for wheels and you're cool with the sizes . . . they'll look hot. Forged, one-piece Nismo hotness.

NOTE: I am not a vendor or a even a retailer. Get these from your local Rays Engineering distributor. In North America, thats Mackin Industries.

Top retailers by USA Region last i checked:
New York - RAV SPEC
Florida - KamiSpeed
California - Speed Image USA
Arizona - Vivid Racing

Is anyone looking?

Everyone gone?

Seriously, is anyone from Rays or Nismo reading?

(Don't tell Rays that i said this but you could also get a set of special edition Nismo 57 Clubsport (variant of mass release Gram Lights 57CR) that look very, very similar with an engraved logo, in the same color and more sizes from Z1 Motorsports for around half the price . . . made by Rays in the same factory, but cast instead of forged)

Spooler · 12-12-2019, 01:57 PM

Weak Sauce....... I will pass.

OptionZero · 12-12-2019, 04:56 PM

honestly, its not meant for you or me except as collectors item

Quicksilvers · 12-13-2019, 05:24 AM

If you really like these wheels get them while you can before they get discounted also. Definitely a true Z enthusiast collectors wheel for sure. Seeing Rays I am sure they are not cheap.

JARblue · 12-13-2019, 08:53 AM

Beautiful wheels

And sooooo much better with the lip and engraved logo. Too bad the sizing options still blow chunks

God-Speed · 12-13-2019, 12:57 PM

Quote:

Originally Posted by JARblue

Beautiful wheels

And sooooo much better with the lip and engraved logo. Too bad the sizing options still blow chunks

OptionZero · 12-13-2019, 05:35 PM

Quote:

Originally Posted by Quicksilvers

If you really like these wheels get them while you can before they get discounted also. Definitely a true Z enthusiast collectors wheel for sure. Seeing Rays I am sure they are not cheap.

I'm pretty sure you mean discontinued. They will most certainly never be discounted.

Brendan · 12-13-2019, 08:37 PM

I miss when they came in colors besides black. Still heat though.

Quicksilvers · 12-14-2019, 02:34 AM

Quote:

Originally Posted by OptionZero

I'm pretty sure you mean discontinued. They will most certainly never be discounted.

It’s common for Rays to discontinue these wheels. Most will just purchase these wheels but if you shop around during Black Friday or the Christmas season it is possible to find these wheels on sale at one point just depends on the vendor you choice to give your business to? I seen these wheels before they look decent and are definitely a collectors wheel.

Quicksilvers · 12-14-2019, 02:36 AM

Nismo LMGT4’s

KamiSpeed · 12-26-2019, 02:57 PM

A true collectors set. If anyone is looking for a set, we're still taking pre-orders for summmer 2020 delivery.

OptionZero · 12-26-2019, 04:38 PM

I wanna build a Z32 or R34 just to have a car to put these on

tonythetiger · 01-09-2020, 08:33 PM

Man should I invest in these or keep my ZE40?

OptionZero · 01-09-2020, 11:10 PM

These will probably hold their value better as they are gonna be more limited

the ZE40 is a mass produced wheel. A very good wheel, strong, light, classic design. But anyone can buy it. There's like crates of them stocked in warehouses.

These? Probably not so

Waiz · 01-25-2020, 10:44 PM

12-12-2019, 12:15 PM	#1 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	NEW! Nismo LMGT4 19-inch ver. New release, apparently limited production: Nismo LMGT4 Made by Rays Engineering Forged, one-piece They are normally available only in 17 and 18 inch, most recently in "Omori Factory Spec". I think one year they were matte black and another they were gloss black. Nismo previously produced this wheel through Rays in 17 and 18 inch sizes with VERY LIMITED AND CRAPPY sizes in 19, some of which were not available through Nismo USA. The new version has an engraved NISMO logo, some lip, and concave face. The only 19's had no lip, only slight concave face, and no engraved logo, instead using a sticker. The best size might have been 19x9.5 +30, which is garbage. The choice to only issue two sizes is pretty interesting. They will work for most Z owners that don't want to run super aggressive sizes. A simple 9.5/10.5 stagger at +12 offset will poke a little bit in front. 265/35 and 305/30 would be ideal. 285/30 and 325/25 might require camber adjustment - definitely in front. While these wheels are spectacular looking, and i would LOVE a set if I had a 350Z, Z32, or GTR (non-R35), they don't go aggressive enough personally, but i am apparently a nutjob. At $800/wheel these are not cheap but they are high end, limited NISMO goodies, so if you're looking for wheels and you're cool with the sizes . . . they'll look hot. Forged, one-piece Nismo hotness. NOTE: I am not a vendor or a even a retailer. Get these from your local Rays Engineering distributor. In North America, thats Mackin Industries. Top retailers by USA Region last i checked: New York - RAV SPEC Florida - KamiSpeed California - Speed Image USA Arizona - Vivid Racing Is anyone looking? Everyone gone? Seriously, is anyone from Rays or Nismo reading? (Don't tell Rays that i said this but you could also get a set of special edition Nismo 57 Clubsport (variant of mass release Gram Lights 57CR) that look very, very similar with an engraved logo, in the same color and more sizes from Z1 Motorsports for around half the price . . . made by Rays in the same factory, but cast instead of forged) sx moneypit, iDaRkkO, Mike_O_Nite and 1 others like this. __________________ OptionZero Build Thread Last edited by OptionZero; 12-12-2019 at 12:20 PM.

12-12-2019, 01:57 PM	#2 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,830 Drives: 2013 Nismo 370z Rep Power: 2684392	Weak Sauce....... I will pass. Rusty likes this.

12-12-2019, 04:56 PM	#3 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	honestly, its not meant for you or me except as collectors item Spooler likes this. __________________ OptionZero Build Thread

12-13-2019, 05:24 AM	#4 (permalink)
Quicksilvers A True Z Fanatic Join Date: May 2017 Location: Atlanta, GA Posts: 2,039 Drives: 2017 370z Rep Power: 25463	If you really like these wheels get them while you can before they get discounted also. Definitely a true Z enthusiast collectors wheel for sure. Seeing Rays I am sure they are not cheap. __________________ Mr. Clean

12-13-2019, 08:53 AM	#5 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Beautiful wheels And sooooo much better with the lip and engraved logo. Too bad the sizing options still blow chunks Hotrodz, Spooler and wideglideleon like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

12-13-2019, 08:37 PM	#8 (permalink)
Brendan Track Member Join Date: Apr 2013 Location: Colorado Posts: 642 Drives: Poor man's Porsche Rep Power: 542	I miss when they came in colors besides black. Still heat though.

12-26-2019, 02:57 PM	#11 (permalink)
KamiSpeed A True Z Fanatic Join Date: Feb 2011 Location: Orlando, FL Posts: 5,888 Drives: 09 370z Rep Power: 25	A true collectors set. If anyone is looking for a set, we're still taking pre-orders for summmer 2020 delivery. __________________ KAMISPEED \| SHOP 370Z PERFORMANCE PARTS & MODS \| SUPPORT@KAMISPEED.COM KAMI SPEED REVIEWS \| FINANCE YOUR PARTS WITH US \| MILITARY & FIRST RESPONDERS PRE-ORDER DEPOSIT PROGRAM \| HKS MASTER SELLER

12-26-2019, 04:38 PM	#12 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	I wanna build a Z32 or R34 just to have a car to put these on hrtbrknprince likes this. __________________ OptionZero Build Thread

01-09-2020, 08:33 PM	#13 (permalink)
tonythetiger A True Z Fanatic Join Date: Oct 2010 Location: SA, TX Posts: 1,035 Drives: 10 Nissan 370z PG MT Rep Power: 193	Man should I invest in these or keep my ZE40? __________________ KWV3/Eibach/StillenG3/FI CBE+LTH+34Row/Uprev/SPL/SouthBendSS/QuaifeLSD/4.08/TommyKaira/Status/VolkZE40/AP Radical BBK/Seibon/Amuse/VIS/Sparco/WorksBellGTC/RJM/Nismo

01-09-2020, 11:10 PM	#14 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,235 Drives: 15 370Z Nismo 6MT Rep Power: 214100	These will probably hold their value better as they are gonna be more limited the ZE40 is a mass produced wheel. A very good wheel, strong, light, classic design. But anyone can buy it. There's like crates of them stocked in warehouses. These? Probably not so BORNGEARHEAD likes this. __________________ OptionZero Build Thread

01-25-2020, 10:44 PM	#15 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nismo LMGT4 Wheel Review! Video Inside	KamiSpeed	Wheels & Tires	7	02-16-2018 09:20 PM
WTT Nismo LMGT4 19x8.5 19x9.5 silver for any wheels/tires	eez33	Mid-Atlantic Region	0	10-29-2015 10:56 AM
[Exclusive] NISMO Black LMGT4 by Rays (Volk Racing)	KamiSpeed	Wheels & Tires	17	06-30-2011 03:23 PM
FS 19" Nismo LMGT4 w/o Tires (Set of 4)	Da.Menace	Parts for sale (Private Classifieds)	3	03-17-2011 01:36 PM
Nismo LMGT4 (18X9/10)+18+15 (5X114.3) $3500 shipped	R390	Parts for sale (Private Classifieds)	2	03-09-2011 09:52 PM