Excessive powder coat orange peel?

redondoaveb · 11-11-2019, 10:06 PM

I got my wheels back from a 2 stage powder coat this evening noticed what I believe is excessive orange peel. Unfortunately, it was evening so I wasn't able to get a look at them in the light which I'll do tomorrow morning. If you zoom in at the bottom of the wheel (the lip) where it says Rohana you can see what I'm talking about. I know a little orange peel can be expected with powder coat but how much is excessive?

k67p67 · 11-12-2019, 12:15 AM

Honestly, that looks a bit sloppy. IMO, the orange peel is excessive.

StormWhite · 11-12-2019, 03:03 AM

Quote:

Originally Posted by k67p67

Honestly, that looks a bit sloppy. IMO, the orange peel is excessive.

God-Speed · 11-12-2019, 05:47 AM

Quote:

Originally Posted by k67p67

Honestly, that looks a bit sloppy. IMO, the orange peel is excessive.

Quote:

Originally Posted by StormWhite

I agree with these guys as well. It just looks very uneven.

redondoaveb · 11-12-2019, 09:26 AM

Yep, I agree with all of you, thanks for the input. I don't believe they followed the application parameters of the powder manufacturer. They have strict parameters for the top coat. I've already contacted the company and am setting up a day to take them back in.

JARblue · 11-12-2019, 09:50 AM

Sorry to see this man. You've been waiting a while. Of course they'd screw 'em up. Hope they get it right this time for you

cooltoy · 11-12-2019, 10:03 AM

Quote:

Originally Posted by redondoaveb

Yep, I agree with all of you, thanks for the input. I don't believe they followed the application parameters of the powder manufacturer. They have strict parameters for the top coat. I've already contacted the company and am setting up a day to take them back in.

They did not follow ethics. If you see something wrong when you are done the job, fix it. Don't just send it to the customer hoping he will not notice.

redondoaveb · 11-12-2019, 10:28 AM

I just got off the phone with Prismatic Powders technical dept. (powder manufacturer). They're emailing me information on the correct procedure for applying transparent top coats. The powder coat company should have done multiple top coats with short curing in between coats to achieve the deep red tone we were looking for. I believe they did one heavy coat. Obviously, that didn't work. The funny thing is that these guys do work for all the top car builders in So. Cal. including Chip Foose who uses them all the time.

JARblue · 11-12-2019, 10:30 AM

I'd bet anything the guy that works on Chip Foose's wheels is not the one who worked on your wheels.

redondoaveb · 11-12-2019, 10:49 AM

Quote:

Originally Posted by JARblue

I'd bet anything the guy that works on Chip Foose's wheels is not the one who worked on your wheels.

Yep. And my wheels got put on the back burner because they were working on other parts for said car builders that were preparing for SEMA.

I guarantee Foose wouldn't have accepted my wheels to take to SEMA

Mike_O_Nite · 11-12-2019, 09:40 PM

That sucks!

Hopefully, they do you right and they take care of them.

If they don’t, send me a PM and I’ll send you the info of the shop that I used for my Tiffany Blue SSR Professor makeover.

CRiZO · 11-12-2019, 09:50 PM

Quote:

Originally Posted by redondoaveb

I just got off the phone with Prismatic Powders technical dept. (powder manufacturer). They're emailing me information on the correct procedure for applying transparent top coats. The powder coat company should have done multiple top coats with short curing in between coats to achieve the deep red tone we were looking for. I believe they did one heavy coat.

I know it's not the same thing, but those wheels look exactly like when people using spray paint try to do one thick coat of paint instead of several light ones.

redondoaveb · 11-12-2019, 09:56 PM

Quote:

Originally Posted by Mike_O_Nite

That sucks!

Hopefully, they do you right and they take care of them.

If they don’t, send me a PM and I’ll send you the info of the shop that I used for my Tiffany Blue SSR Professor makeover.

I went down and looked at the wheels in the daylifht today and they actually don't look as bad as I thought. The color on them is amazing (that picture in my other post is with a flash so they don't even look red). In the sunlight, the metallic really stands out. The orange peel is mainly on the faces. It appears they sprayed the hard to reach area's lighter (they look really good) and just sprayed the faces heavy.

I talked to them today and they said they would redo them no problem. He's going to make some minor adjustments and see if that improves the quality.

11-12-2019, 12:15 AM	#2 (permalink)
k67p67 Enthusiast Member Join Date: Oct 2016 Location: Rancho Cucamonga, CA Posts: 311 Drives: 2017 Nismo Tech 6MT Rep Power: 3937	Honestly, that looks a bit sloppy. IMO, the orange peel is excessive. God-Speed, wideglideleon and redondoaveb like this. __________________ SOLD2017 370Z Nismo Tech 6MT PART OUT IN PROGRESS Work \| Motordyne \| Powertrix \| Swift \| Michelin \| Takeda \| Hotchkis \| RJM \| Voodoo13 \| SPL \| SPC \| Z1 Motorsports \| ZSpeed \| Morimoto \| Craft Square

11-12-2019, 09:26 AM	#5 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,370 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	Yep, I agree with all of you, thanks for the input. I don't believe they followed the application parameters of the powder manufacturer. They have strict parameters for the top coat. I've already contacted the company and am setting up a day to take them back in. __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

11-12-2019, 09:50 AM	#6 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Sorry to see this man. You've been waiting a while. Of course they'd screw 'em up. Hope they get it right this time for you wideglideleon and redondoaveb like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

11-12-2019, 10:28 AM	#8 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,370 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	I just got off the phone with Prismatic Powders technical dept. (powder manufacturer). They're emailing me information on the correct procedure for applying transparent top coats. The powder coat company should have done multiple top coats with short curing in between coats to achieve the deep red tone we were looking for. I believe they did one heavy coat. Obviously, that didn't work. The funny thing is that these guys do work for all the top car builders in So. Cal. including Chip Foose who uses them all the time. __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

11-12-2019, 10:30 AM	#9 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	I'd bet anything the guy that works on Chip Foose's wheels is not the one who worked on your wheels. scope22, wideglideleon and redondoaveb like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

11-12-2019, 09:40 PM	#11 (permalink)
Mike_O_Nite Enthusiast Member Join Date: Nov 2016 Location: Los Angeles Posts: 432 Drives: 2017 370Z Sport Rep Power: 9	That sucks! Hopefully, they do you right and they take care of them. If they don’t, send me a PM and I’ll send you the info of the shop that I used for my Tiffany Blue SSR Professor makeover. redondoaveb likes this.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New or powder coat	jewelz	Wheels & Tires	6	03-16-2017 03:15 PM
Powder Coat recommendations in KC?! HELP?!?!?	ViciousZ34	Wheels & Tires	1	09-15-2015 09:09 AM
Orange peel clear	ZeNato	Exterior & Interior	14	10-24-2014 06:59 PM
370Z Paint Job 'Orange Peel'	370er	Australia/New Zealand	18	02-06-2012 07:21 PM
Orange peel	iceman21_23	Exterior & Interior	34	05-20-2009 03:15 AM