Will wheels fit?

13_370_13 · 08-17-2017, 07:04 AM

I know there is a sticky on this but I've read thru it over and over but was unable to find enough info. I'm looking at forgestar f14. Stamping on the inside of the wheel says 19x9 and 19x10. Believe the stamp reads the offset is 26 on the 19x9 and 13 on the 19x10 running 255/40 and 285/35. I do have sport brakes too n my Z as well. Thanks for any help!

jchammond · 08-17-2017, 07:56 AM

Uncertain; but the guy's at Getyourwheels.com will know.
The +26 9's would have to be semi-deep@+26 & SDC +13 19x10's...that's the only way those 2 particular sizes are made.
That could be information for someone else to know & could answer.

SS_Firehawk · 08-17-2017, 09:14 AM

The fronts would be just a tiny bit aggressive, it may fit perfect. Kinda depends on each wheel. But with them being F14's, I'd say they will fit without issue

13_370_13 · 08-17-2017, 10:22 AM

Appreciate the replies! Was Hoping there would be no fitmit issue. He's asking 800 w/ continental tires. Wanting them to look pretty square.

jchammond · 08-17-2017, 11:18 AM

If there is no interference w/brakes; they will sit good.

cooltoy · 08-17-2017, 12:27 PM

As jchammond said, contact getyourwheels. Jason will tell you for sure if they clear sport brakes..

13_370_13 · 08-17-2017, 01:05 PM

Ok! I'll get ahold of Jason. Appreciate all the input

NorthStyle · 08-17-2017, 01:09 PM

Are you on stock suspension or lowered?

jchammond · 08-17-2017, 01:18 PM

The outer wheel lips will sit 1mm further in than mine. Front & Rear...the top will probably lean in a tad more in rear; as in this pic I'm at nearly 0* camber out back.

Sent from my iPhone using Tapatalk

13_370_13 · 08-17-2017, 01:24 PM

Yea I am at stock height for now. Have debated on lowering but the roads around here are horrible as it is and already have clearance issues. Your setup looks great! Guess the offset would be to my liking

Zerafian · 08-17-2017, 04:04 PM

Quote:

Originally Posted by SS_Firehawk

The fronts would be just a tiny bit aggressive, it may fit perfect. Kinda depends on each wheel. But with them being F14's, I'd say they will fit without issue

19x9 +26 would be semi aggressive? Stock nismo wheels are 9.5" +40 front, thats pretty much the same within a few mm. Nismos sit plenty within the wheel well too.

or did I read your post wrong? Thats possible.

OptionZero · 08-17-2017, 05:37 PM

It's not aggressive at all, certain people throwing term around way too loosely.

Folks run 19x9.5 +22 te37 sizing all the time with mild suspension setups (stock or shock/spring)

More proof:
OEM Nismo is 19x9.5 +40 front
A 19x9 +26 only extends 8mm out more. Thats . . . nothing.

If you have SPL front upper control arms your fitment options are basically limited only to the skill of your alignment guy.

i have 20x11 +15 in front with a 275/30, on OEM metal. I don't really wanna here anyone talk about how 19x9 +26 is aggressive. Its not even a finger's width past stock.

Everyone with a wheel question should read THIS POST: [Official] 370z wheel fitment guide (pics/specs) only
It's from the Wheel Fitment Guide thread

19x9.5 +22; 19x10.5 +12
265/35/19; 305/30/19
KW v3, height set with fender clearly above top of tire (about 1 finger gap)

I do not consider that aggressive. To me, thats "normal" - perfectly fine for all forms of driving and better than stock
Near stock would be considered "stupid"
my setup would be "aggressive"
widebody + bags would be "super aggressive"

And there's gradations between

13_370_13 · 08-17-2017, 06:53 PM

Jason was right on it. Thanks for the advice everyone. Stated they will clear the akebons no problem.

SS_Firehawk · 08-17-2017, 08:36 PM

It's wheel specific. I run 19*10 +30 up front on Swift's. My fitment is flush. With 285's, it rubbed the liner in one spot just a tiny bit. A +26 with my wheels would be poking. But I don't run an 11" wheel with 275 tire.

To put it into perspective, every half inch is 12.7mm. my wheels at +30 stick out 9mm further than the OP's specs.

Zero's fitment is over an inch past the body, which implies he's running a stretched tire, with a low profile, and added some camber to fit them.

It depends on how you want it to fit. But based on the specs, your more than okay

cooltoy · 08-17-2017, 09:01 PM

Quote:

Originally Posted by 13_370_13

Jason was right on it. Thanks for the advice everyone. Stated they will clear the akebons no problem.

Jason is the bomb.

08-17-2017, 07:04 AM	#1 (permalink)
13_370_13 Base Member Join Date: Dec 2016 Location: Ohio Posts: 21 Drives: '13 370Z MB M6 Rep Power: 25	Will wheels fit? I know there is a sticky on this but I've read thru it over and over but was unable to find enough info. I'm looking at forgestar f14. Stamping on the inside of the wheel says 19x9 and 19x10. Believe the stamp reads the offset is 26 on the 19x9 and 13 on the 19x10 running 255/40 and 285/35. I do have sport brakes too n my Z as well. Thanks for any help! Bonz likes this.

08-17-2017, 07:56 AM	#2 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	Uncertain; but the guy's at Getyourwheels.com will know. The +26 9's would have to be semi-deep@+26 & SDC +13 19x10's...that's the only way those 2 particular sizes are made. That could be information for someone else to know & could answer. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

08-17-2017, 09:14 AM	#3 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	The fronts would be just a tiny bit aggressive, it may fit perfect. Kinda depends on each wheel. But with them being F14's, I'd say they will fit without issue __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

08-17-2017, 11:18 AM	#5 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	If there is no interference w/brakes; they will sit good. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

08-17-2017, 12:27 PM	#6 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	As jchammond said, contact getyourwheels. Jason will tell you for sure if they clear sport brakes.. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

08-17-2017, 10:22 AM	#4 (permalink)
13_370_13 Base Member Join Date: Dec 2016 Location: Ohio Posts: 21 Drives: '13 370Z MB M6 Rep Power: 25	Appreciate the replies! Was Hoping there would be no fitmit issue. He's asking 800 w/ continental tires. Wanting them to look pretty square.

08-17-2017, 01:05 PM	#7 (permalink)
13_370_13 Base Member Join Date: Dec 2016 Location: Ohio Posts: 21 Drives: '13 370Z MB M6 Rep Power: 25	Ok! I'll get ahold of Jason. Appreciate all the input

08-17-2017, 01:09 PM	#8 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,255 Drives: 2011 370Z Nismo Rep Power: 24277	Are you on stock suspension or lowered?

08-17-2017, 01:18 PM	#9 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	The outer wheel lips will sit 1mm further in than mine. Front & Rear...the top will probably lean in a tad more in rear; as in this pic I'm at nearly 0* camber out back. Sent from my iPhone using Tapatalk __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

08-17-2017, 01:24 PM	#10 (permalink)
13_370_13 Base Member Join Date: Dec 2016 Location: Ohio Posts: 21 Drives: '13 370Z MB M6 Rep Power: 25	Yea I am at stock height for now. Have debated on lowering but the roads around here are horrible as it is and already have clearance issues. Your setup looks great! Guess the offset would be to my liking jchammond likes this.

08-17-2017, 05:37 PM	#12 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,225 Drives: 15 370Z Nismo 6MT Rep Power: 214100	It's not aggressive at all, certain people throwing term around way too loosely. Folks run 19x9.5 +22 te37 sizing all the time with mild suspension setups (stock or shock/spring) More proof: OEM Nismo is 19x9.5 +40 front A 19x9 +26 only extends 8mm out more. Thats . . . nothing. If you have SPL front upper control arms your fitment options are basically limited only to the skill of your alignment guy. i have 20x11 +15 in front with a 275/30, on OEM metal. I don't really wanna here anyone talk about how 19x9 +26 is aggressive. Its not even a finger's width past stock. Everyone with a wheel question should read THIS POST: [Official] 370z wheel fitment guide (pics/specs) only It's from the Wheel Fitment Guide thread 19x9.5 +22; 19x10.5 +12 265/35/19; 305/30/19 KW v3, height set with fender clearly above top of tire (about 1 finger gap) I do not consider that aggressive. To me, thats "normal" - perfectly fine for all forms of driving and better than stock Near stock would be considered "stupid" my setup would be "aggressive" widebody + bags would be "super aggressive" And there's gradations between jchammond and NorthStyle like this. __________________ OptionZero Build Thread Last edited by OptionZero; 08-17-2017 at 05:42 PM.

08-17-2017, 06:53 PM	#13 (permalink)
13_370_13 Base Member Join Date: Dec 2016 Location: Ohio Posts: 21 Drives: '13 370Z MB M6 Rep Power: 25	Jason was right on it. Thanks for the advice everyone. Stated they will clear the akebons no problem. jchammond likes this.

08-17-2017, 08:36 PM	#14 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	It's wheel specific. I run 1910 +30 up front on Swift's. My fitment is flush. With 285's, it rubbed the liner in one spot just a tiny bit. A +26 with my wheels would be poking. But I don't run an 11" wheel with 275 tire. To put it into perspective, every half inch is 12.7mm. my wheels at +30 stick out 9mm further than the OP's specs. Zero's fitment is over an inch past the body, which implies he's running a stretched tire, with a low profile, and added some camber to fit them. It depends on how you want it to fit. But based on the specs, your more than okay __________________ Old Car:GTM TSC'd* 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction Last edited by SS_Firehawk; 08-17-2017 at 08:42 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WORK Wheels Largest East Coast Distri \|\| NYC Show Room (60+ Wheels On Display)	RavSpec	Tires/Wheels	375	05-27-2018 11:59 PM
WTB - OEM 19" Sport wheels 2009-2016 (also Nismo wheels)	Magicd	Canada	3	04-25-2016 04:25 PM
[FOR SALE] Base 18" wheels and TPMS for sale- Winter wheels!	kdrshocker	Parts for sale (Private Classifieds)	10	12-14-2013 05:15 PM
[WTB] Trade my 19" stock rays for nismo wheels or aftermarket wheels + cash	Amelio1217	Parts for sale (Private Classifieds)	0	05-26-2013 11:17 PM
[WTB] Wanted: OEM Nismo Wheels. Will buy or trade 19" sport wheels plus cash	370zGatorman	Parts for sale (Private Classifieds)	9	07-12-2012 10:40 PM