Diff bushing removal kit

Z Runner · 12-23-2017, 11:12 PM

WTB differential bushing removal kit.

1st · 12-27-2017, 12:59 PM

Try here:

https://www.z1motorsports.com/transm...7-p-11086.html

-Nice tool have, The price might steer folks away. I have been told it can be cut out.

Leadfooted · 01-07-2018, 09:32 PM

You still looking for one? Unless you have access to a lift I do not recommend it. You need atleast 3 to 4ft cheater bar. Just use a chisel or sawzaw.

Wonka2581 · 01-07-2018, 10:26 PM

Quote:

Originally Posted by Leadfooted

You still looking for one? Unless you have access to a lift I do not recommend it. You need atleast 3 to 4ft cheater bar. Just use a chisel or sawzaw.

What if your useing an air impact?

Jayhovah · 01-07-2018, 10:28 PM

Quote:

Originally Posted by Wonka2581

What if your useing an air impact?

You'd jack up the threads pretty fast on the puller I'd imagine (pure speculation)... a $20 sawzall from harbor freight did the job for me on jackstands.

Leadfooted · 01-08-2018, 05:46 AM

Quote:

Originally Posted by Wonka2581

What if your useing an air impact?

I'm not sure they make an impact with that much torque plus it'll destroy the threaded rod I'm not playing when I say 3-4ft cheater bar plus there's not much room for the impact with the removal tool in place iirc

Zoren 370 · 01-08-2018, 07:29 AM

[QUOTE=Jayhovah;3720306]You'd jack up the threads pretty fast on the puller I'd imagine (pure speculation)... a $20 sawzall from harbor freight did the job for me on jackstands.[/QUOTE

Did you make a video of it Jay?

Kzonts · 01-08-2018, 10:00 AM

Quote:

Originally Posted by Leadfooted

You still looking for one? Unless you have access to a lift I do not recommend it. You need atleast 3 to 4ft cheater bar. Just use a chisel or sawzaw.

I used it without a lift and it was very, very difficult. I could only use a 24" ratcheting breaker bar and it took every ounce of energy I had (legs and arms).

wideglideleon · 01-08-2018, 11:22 AM

I used the puller and it took me pulling and my son using his foot on the breaker bar and wore us both out. If was to do it again I would with out doubt cut that sucker out.

Leadfooted · 01-08-2018, 11:26 AM

Quote:

Originally Posted by Kzonts

I used it without a lift and it was very, very difficult. I could only use a 24" ratcheting breaker bar and it took every ounce of energy I had (legs and arms).

That's how I did it too but I had friend help aswell I'm not gonna suggest it be done that way when there is easier ways if you can doit that way I have one I'd sell him if he wants it

Kzonts · 01-08-2018, 12:43 PM

Quote:

Originally Posted by Leadfooted

That's how I did it too but I had friend help aswell I'm not gonna suggest it be done that way when there is easier ways if you can doit that way I have one I'd sell him if he wants it

Agree... I wouldn't attempt it again that's for sure...

Jayhovah · 01-08-2018, 04:00 PM

Quote:

Originally Posted by Zoren 370

Did you make a video of it Jay?

Nope.. I did watch some youtube videos on it though. Also used the DIY on here has a starting point. Once you get over the idea of taking a saw to something its pretty easy.

jchammond · 01-08-2018, 04:18 PM

I used a 1” bolt & large socket...pulled that sucker out.

Sent from my iPhone using Tapatalk

Leadfooted · 01-08-2018, 04:36 PM

Quote:

Originally Posted by jchammond

I used a 1” bolt & large socket...pulled that sucker out.

Sent from my iPhone using Tapatalk

See you had the advantage finer threads the z1 kit has very coarse threads on its setup I started to go buy a piece of all thread and use it but I thought it might strip it

jchammond · 01-08-2018, 06:02 PM

Quote:

Originally Posted by Leadfooted

See you had the advantage finer threads the z1 kit has very coarse threads on its setup I started to go buy a piece of all thread and use it but I thought it might strip it

1” x 8 coarse thread; that’s after I used a smaller one to pull the guts out first....notice 1.5” wrench.

12-23-2017, 11:12 PM	#1 (permalink)
Z Runner Enthusiast Member Join Date: Sep 2015 Location: Puerto Rico Posts: 332 Drives: 2016 370Z KAD M Base Rep Power: 27	Diff bushing removal kit WTB differential bushing removal kit.

12-27-2017, 12:59 PM	#2 (permalink)
1st A True Z Fanatic Join Date: Jul 2012 Location: I 80 Biz U.S. 50 Posts: 1,710 Drives: Platinum Z Rep Power: 1616	Try here: https://www.z1motorsports.com/transm...7-p-11086.html -Nice tool have, The price might steer folks away. I have been told it can be cut out. Last edited by 1st; 12-27-2017 at 01:04 PM.

01-08-2018, 04:18 PM	#13 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	I used a 1” bolt & large socket...pulled that sucker out. Sent from my iPhone using Tapatalk Kzonts and Leadfooted like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] NEW! Quaife Diff QDF11L, Bearings, bushing, bolts, oil, finned diff cover...	kdrshocker	Parts for sale (Private Classifieds)	14	11-02-2018 12:07 AM
[FOR SALE] Z1 UCA's, Whiteline Rear Diff Bushing Set	Boost_lee	Parts for sale (Private Classifieds)	4	11-22-2017 06:08 PM
whiteline diff bushing gear noise	secondnissan	Engine & Drivetrain	41	08-08-2016 05:13 PM
Rear Diff bushing, which on top?	YzGyz	Engine & Drivetrain	6	01-29-2015 09:50 PM
[FOR SALE] SPL Solid Diff Bushing Set	oro	Parts for sale (Private Classifieds)	3	03-22-2013 02:55 AM

01-07-2018, 09:32 PM	#3 (permalink)
Leadfooted Base Member Join Date: Mar 2016 Location: Greenville S.C. Age: 46 Posts: 76 Drives: 14' nismo gm 6mt Rep Power: 9	You still looking for one? Unless you have access to a lift I do not recommend it. You need atleast 3 to 4ft cheater bar. Just use a chisel or sawzaw.

01-08-2018, 07:29 AM	#7 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	[QUOTE=Jayhovah;3720306]You'd jack up the threads pretty fast on the puller I'd imagine (pure speculation)... a $20 sawzall from harbor freight did the job for me on jackstands.[/QUOTE Did you make a video of it Jay?

01-08-2018, 11:22 AM	#9 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64085	I used the puller and it took me pulling and my son using his foot on the breaker bar and wore us both out. If was to do it again I would with out doubt cut that sucker out.