Fuel trim difference between bank 1 & 2

Averying

Just starting the remote tuning process after swapping in 1000cc injectors on my car. Currently have the base map from Eugene loaded in the car. I’m noticing that the fuel trims between bank 1 and 2 are different.

Bank 1 reads normal at about 96-97% STFT, 100% LTFT.

Bank 2 reads ~106-108% STFT, 90% LTFT.

I was originally thinking that the trim for bank 2 is 10% higher from looking at the short term, but if you consider that the long term is 10% less, the banks are nearly identical. Weird

Is this something to be concerned about? Will the Bank 2 LTFT eventually go back to ~100% and then the banks will be equal in fuel trim?

I already looked for leaks (cigar-smoke tested intake.. nothing. Hose-to-ear tested intake manifold area.. nothing. No audible exhaust leaks)


Sent from my iPhone using Tapatalk

__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes

Averying

May have answered my own question. Reset ECU to clear stored fuel trims and everything appears to be the same between banks during idle. I’ll see if they change during a driving session


Sent from my iPhone using Tapatalk

__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes

Tractionless

Curious as to where you found what the normal parameter should be? Thanks

__________________
Toys Not Tots

Averying

100% +/- 5% is a good range for short term fuel trims to fall in, according to Eugene.

To get both banks to be in this range, I reset the ECU through the ECUTEK ProECU app. I had the battery unplugged in the past so I’m not sure why that didn’t reset the ECU to clear previously stored trims? Maybe the ECUTEK reset procedure clears additional parameters compared to a battery-disconnect reset


Sent from my iPhone using Tapatalk

__________________
2009 Sport Touring | Platinum Graphite | GTM Stage 1 Supercharger | BC BR Coilovers | Hotchkis Swaybar | Z1 FUCAs | AME TM-02 Wheels | Z1 2-piece Front Rotors | Z1 Clutch & Flywheel | Invidia Gemini Catback | GTM Resonated Test Pipes

Tractionless

Good info. thanks. I'm always looking for datalogging parameters. Haven't found much around.

__________________
Toys Not Tots