Tuning question

Patrickz34 · 03-23-2016, 07:09 PM

Hey guys, I am being charged 600$ for a uprev tune in socal, or $560 if I bring my friend in with me. Do you guys think this is a fair price, or know of anyone that has a better price in southern california? Thanks!
Includes dyno run of course

axmea? · 03-23-2016, 08:41 PM

Would help if you tell us where it was from.

dP3NGU1N · 03-23-2016, 08:43 PM

Sounds about right, actually... I'm guessing specialty z?

StillenZ84 · 03-23-2016, 09:13 PM

I would hope if it was Specialty Z, you would be tuning with Ecutek. Seb is an animal with Ecutek.

Patrickz34 · 03-24-2016, 12:03 AM

I was gonna go with Saul from Nismo Knights, how much am I looking at total with Specialty Z? I believe Saul uses uprev

Patrickz34 · 03-24-2016, 12:07 AM

Update: I just checked their website, ECUtek is 800$ for NA :O is it a huge difference between uprev and ecutek? He charges 600$ with uprev.

PongSanity · 03-24-2016, 04:38 AM

That's 850 for the cable,license and tuning (f.i.). $650 NA. if u just want a tune. Give him a call.

Sent from my iPhone using Tapatalk

Patrickz34 · 03-24-2016, 01:33 PM

Just spoke with specialty Z and the ecutek tune is 850$ for NA. They highly recommended it over uprev due to potentially higher numbers and many more features. Anybody have any input on the ecutek vs uprev topic? thanks! It's a 250$ difference

JARblue · 03-24-2016, 01:37 PM

Ecutek > Uprev

Lots of threads on this, including dyno sheets of guys that made the switch and gained power.

ANMVQ · 03-24-2016, 01:41 PM

Check my UPREV vs ECUTEK thread, I made more WHP just switching software, JohnV did that tune for me also

http://www.myg37.com/forums/ecu-tuni...vs-ecutek.html

So Finally did it

TerribleONE · 03-24-2016, 01:58 PM

Go to Specialty Z and use Ecutek

End thread

barncobob · 03-24-2016, 02:12 PM

for us CA guys, do these tunes screw up the smog tests?

TerribleONE · 03-24-2016, 02:14 PM

Quote:

Originally Posted by barncobob

for us CA guys, do these tunes screw up the smog tests?

No it will not unless you have other mods (HFC's or TP's)

Patrickz34 · 03-24-2016, 06:04 PM

Thanks guys! I spoke to Seb @ specialtyZ and am convinced with EcuteK, will post results when finished.

StillenZ84 · 03-24-2016, 06:11 PM

Very good choice! You will not be disappointed.

03-23-2016, 07:09 PM	#1 (permalink)
Patrickz34 Base Member Join Date: May 2014 Location: Riverside, California Posts: 222 Drives: 09' 370z Touring 6MT Rep Power: 11	Tuning question Hey guys, I am being charged 600$ for a uprev tune in socal, or $560 if I bring my friend in with me. Do you guys think this is a fair price, or know of anyone that has a better price in southern california? Thanks! Includes dyno run of course __________________ Motordyne E370, Berk HFC, Stillen G3, SPC Camber arms Ecutek Tune by Sebastian @ SpecialtyZ, Z1 34 Row Swift springs, Morimoto RGB Halos, Vordoven Forme 9

03-23-2016, 08:41 PM	#2 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,236 Drives: WELL ZED PW 6MT Rep Power: 53241	Would help if you tell us where it was from. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

03-23-2016, 08:43 PM	#3 (permalink)
dP3NGU1N A True Z Fanatic Join Date: Feb 2011 Location: Irvine Posts: 1,682 Drives: 13 PW sport 6mt Rep Power: 18	Sounds about right, actually... I'm guessing specialty z? axmea? and StillenZ84 like this. __________________ 35% Hooper Optik \| Takeda Attack CAI \| F.I. HFC \| Hotchkis Sway Bar \| Stillen 24row \| OS Giken Super Lock LSD \| TK Shift Knob \| EVO-R Carbon Diffuser

03-23-2016, 09:13 PM	#4 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 18	I would hope if it was Specialty Z, you would be tuning with Ecutek. Seb is an animal with Ecutek. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

03-24-2016, 12:03 AM	#5 (permalink)
Patrickz34 Base Member Join Date: May 2014 Location: Riverside, California Posts: 222 Drives: 09' 370z Touring 6MT Rep Power: 11	I was gonna go with Saul from Nismo Knights, how much am I looking at total with Specialty Z? I believe Saul uses uprev __________________ Motordyne E370, Berk HFC, Stillen G3, SPC Camber arms Ecutek Tune by Sebastian @ SpecialtyZ, Z1 34 Row Swift springs, Morimoto RGB Halos, Vordoven Forme 9

03-24-2016, 12:07 AM	#6 (permalink)
Patrickz34 Base Member Join Date: May 2014 Location: Riverside, California Posts: 222 Drives: 09' 370z Touring 6MT Rep Power: 11	Update: I just checked their website, ECUtek is 800$ for NA :O is it a huge difference between uprev and ecutek? He charges 600$ with uprev. __________________ Motordyne E370, Berk HFC, Stillen G3, SPC Camber arms Ecutek Tune by Sebastian @ SpecialtyZ, Z1 34 Row Swift springs, Morimoto RGB Halos, Vordoven Forme 9

03-24-2016, 04:38 AM	#7 (permalink)
PongSanity Enthusiast Member Join Date: Jul 2014 Location: Virgin Islands Posts: 261 Drives: '09 G37s KH3 6MT Rep Power: 11	That's 850 for the cable,license and tuning (f.i.). $650 NA. if u just want a tune. Give him a call. Sent from my iPhone using Tapatalk

03-24-2016, 01:33 PM	#8 (permalink)
Patrickz34 Base Member Join Date: May 2014 Location: Riverside, California Posts: 222 Drives: 09' 370z Touring 6MT Rep Power: 11	Just spoke with specialty Z and the ecutek tune is 850$ for NA. They highly recommended it over uprev due to potentially higher numbers and many more features. Anybody have any input on the ecutek vs uprev topic? thanks! It's a 250$ difference __________________ Motordyne E370, Berk HFC, Stillen G3, SPC Camber arms Ecutek Tune by Sebastian @ SpecialtyZ, Z1 34 Row Swift springs, Morimoto RGB Halos, Vordoven Forme 9

03-24-2016, 01:37 PM	#9 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Ecutek > Uprev Lots of threads on this, including dyno sheets of guys that made the switch and gained power. Memphis370Z likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

03-24-2016, 01:41 PM	#10 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Check my UPREV vs ECUTEK thread, I made more WHP just switching software, JohnV did that tune for me also http://www.myg37.com/forums/ecu-tuni...vs-ecutek.html So Finally did it __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda, Last edited by ANMVQ; 03-24-2016 at 01:44 PM.

03-24-2016, 01:58 PM	#11 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	Go to Specialty Z and use Ecutek End thread __________________ 638WHP 541WTQ @ 13.5PSI Build thread

03-24-2016, 02:12 PM	#12 (permalink)
barncobob A True Z Fanatic Join Date: Sep 2015 Location: hangtown, CA Posts: 1,164 Drives: 16 370Z auto Rep Power: 590	for us CA guys, do these tunes screw up the smog tests?

03-24-2016, 06:04 PM	#14 (permalink)
Patrickz34 Base Member Join Date: May 2014 Location: Riverside, California Posts: 222 Drives: 09' 370z Touring 6MT Rep Power: 11	Thanks guys! I spoke to Seb @ specialtyZ and am convinced with EcuteK, will post results when finished. Nik@SOHO and StillenZ84 like this. __________________ Motordyne E370, Berk HFC, Stillen G3, SPC Camber arms Ecutek Tune by Sebastian @ SpecialtyZ, Z1 34 Row Swift springs, Morimoto RGB Halos, Vordoven Forme 9

03-24-2016, 06:11 PM	#15 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 18	Very good choice! You will not be disappointed. Patrickz34 likes this. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HP tuning question	Smoke24	Tuning	4	02-03-2015 02:43 PM
tuning question	evil370z	Tuning	2	10-12-2014 02:54 PM
Tuning Question	370z_Sniper	Tuning	10	01-30-2012 07:33 AM
Tuning Question	smickey	Tuning	2	09-01-2011 04:10 PM
question for tuning companies	Zsteve	Tuning	2	11-05-2009 08:04 PM