1/8 Mile run

Dragon_Ball_Z

Hey guys, I ran my Z for it's first time on the drags trip. I got a 8.9 as my best time out of seven runs. I averaged 9.0-9.2. It is a six speed manual sport touring. 1200 miles on it. I was slipping the whole way and it is bone stock. Is a 8.9 slow because i have seen many threads with people averaging 8.2.

__________________
Build in Progress

shfeddy

Before I knew how to dragrace properly, i would run 9.2 ish myself. I then began to hold my RPM about 2-3k and launch and got up to 8.6. Try waiting a while between your runs and letting the engine cool off, and waiting also allows the launch pad to become more tacky so you get a better grip when stomping on the gas. 8.9 isnt slow, its average, you just gotta practice with higher launch RPM's. Sidenote, I have a supercharger and barely make 8.2, no way there are stock Z's running that time

__________________
^Stillen SC kit^ 345 WHP
Stillen 19 Row Oil Cooler
TSW Nurburgring * Nitto555 305x30x18* 255x45x18

FPenvy

i ran a 8.3 1/8th with just intakes and exhaust.



timeslip included for proof lol

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

Dragon_Ball_Z

Thanks guys for the tips. I have factory sports on there now, will slicks shave off time?

__________________
Build in Progress

FPenvy

any traction added will help but if you want slicks that a whole different ball game. i mean drag radials should be your first step if thats the route you're going. also bumping down to 18" wheels would be even better but most wont clear rear sport brake calipers.

we actually have had a recent thread discussion on all this.

Time for the 10s.

theres some good wheel/tire and suspension info in here for quicker times. a lot of experience and knowledge from some of these guys will go a long way at the track.

also my run was on stock ray wheels and michelin PSS tires in stock sizes.

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

Dragon_Ball_Z

Would drag radials stick good on the street too? A car with 8.5 on the track got left on the street by a 370z

__________________
Build in Progress

FPenvy

ehhhhh thats hard to say without knowing what car it was and the situation.

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

Z eliminator

7.95 to 7.927 @ 90.7 miles.
my best 1/8 mile
all motor with bolt ons

Z

__________________
12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

FPenvy

yea yea we all know Z lol

had to come in and steal my thunder

__________________
324whp/258wtq AAM Tuned |F.I. NonRes CF CBE/NonRes TestPipes #373|UpRev Tuner|Akuma Motorsports Intakes|Z1 34 Row Oil Cooler

Dragon_Ball_Z

It was my car, srt4 twin turbo 25psi boost dodge neon built ran a 8.4 in the 1/8 and I ran a 8.9. On the street I got him by three car lengths. It was a closed road with no traffic, 0-150

__________________
Build in Progress

3rdDanZ

8.28 s with K&N drop-in's & tuned Achilles Sport2 tires only (street radials). My pass will be available on dragtimes within the next few days. Same here, that was an SS - he was cool about it, but didn't line up for a 3rd time later that night & neither did a struggling ZO6 that was in the mid to high 8's. Also helped out a manual Z driver later on. I can tell you how to exactly do this & faster if you want (60'), with stock power, in a private email - if you have the auto for club members ONLY. These are cheapo $78 tires.

Dragon_Ball_Z

I ran today and I am bone stock and got a 8.55. I smoked a auto camaro ss twice.

__________________
Build in Progress