Ride Height, Tire size, Spring Discussion

MinionZ · 07-20-2018, 09:04 AM

Hey guys,

I was gonna start a thread on the track z/g FB page but figured I'd try here first. Looking for opinions/experience on my next wheel/ tire setup. In the past I have run a staggered setup of 18x10/12 with 275/35 and 305/35 nitto nt01's. i am looking to switch to 10.5 square setup along with possibly a different tire brand/ model. I have heard decent things about RE71's, maxxis rc1, r888r's, and bfg rivals. i would like to stay around the 275 or 285 section width but the overall size and weight of the tires range from like 27-31lbs and 24.8-26.7in.

I guess my questions are what tire size you seem to like the best, what tire model, and any setup notes that you've noticed.

DarkJak · 07-20-2018, 09:23 AM

I just got some 18x10.5 wheels square delivered and plan to run 275/40 for now, with Nexen SUR4Gs.
Depending on how that feels at track days, I might go with 285/35 Hankook R-S4's next time around. Sadly, RS4s are sold out in 275/40.
I ideally wanted 295/35 but selection in that size is pretty bad

Hotrodz · 07-20-2018, 12:39 PM

I am boosted so I run as much tire as I can on a square setup. I think you need to decide on what thread wear of tire you want run and what your expectations are for the track. If you are competing some formats state 200 thread wear tire and others 100. If it doesn't matter then there are numerous brands that are all pretty close in lap times but very in tire life with re71r being the worst for longevity and the best on lap times. The nt01s are my favorite as they are fast and they seem to wear better. I hear good thing about Maxxis and it looks like Nexen is going to come out with a wider tire selection soon!

Sent from my SM-G965U using Tapatalk

SS_Firehawk · 07-20-2018, 03:15 PM

You're going to need at least a +30 to a +36 offset to fit up front and fit a full width tire. It's going to rub unless you run some heavy camber.

MinionZ · 07-20-2018, 04:00 PM

Quote:

Originally Posted by SS_Firehawk

You're going to need at least a +30 to a +36 offset to fit up front and fit a full width tire. It's going to rub unless you run some heavy camber.

i'm at -2.8 now. drove around with a 18x10.5 +15 rpf1 for a bit with a 275/35 nt01 and had no issues, but i do agree more offset is needed up front

Hotrodz · 07-20-2018, 04:11 PM

Quote:

Originally Posted by MinionZ

i'm at -2.8 now. drove around with a 18x10.5 +15 rpf1 for a bit with a 275/35 nt01 and had no issues, but i do agree more offset is needed up front

I run the nt03 18x10.5 +30 square and then run a 15 mm spacer in the rear so I can rotate tires freely. I also run TE SL 18x11 +18 square and me camber is -2.8 right now.

austinroberts · 07-25-2018, 02:24 AM

@hotrods
Can you post a photo with your nto3s?

Hotrodz · 07-25-2018, 10:14 AM

Quote:

Originally Posted by austinroberts

@hotrods
Can you post a photo with your nto3s?

As reqsted!

Sent from my SM-G965U using Tapatalk

bpchaos · 07-25-2018, 02:32 PM

Quote:

Originally Posted by DarkJak

I just got some 18x10.5 wheels square delivered and plan to run 275/40 for now, with Nexen SUR4Gs.
Depending on how that feels at track days, I might go with 285/35 Hankook R-S4's next time around. Sadly, RS4s are sold out in 275/40.
I ideally wanted 295/35 but selection in that size is pretty bad

I have a set of 275/40 RS4s that I can sell, but they're in California lol.

Elmo370z · 08-09-2018, 07:39 PM

Rs-4 275/35/19 square. Hotchkis front sway, reaR sway delete and nismo shocks and struts, spl front end links.

07-20-2018, 09:04 AM	#1 (permalink)
MinionZ Base Member Join Date: Jan 2016 Location: Kansas Posts: 41 Drives: 09 Nissan 370z m6 Rep Power: 9	Ride Height, Tire size, Spring Discussion Hey guys, I was gonna start a thread on the track z/g FB page but figured I'd try here first. Looking for opinions/experience on my next wheel/ tire setup. In the past I have run a staggered setup of 18x10/12 with 275/35 and 305/35 nitto nt01's. i am looking to switch to 10.5 square setup along with possibly a different tire brand/ model. I have heard decent things about RE71's, maxxis rc1, r888r's, and bfg rivals. i would like to stay around the 275 or 285 section width but the overall size and weight of the tires range from like 27-31lbs and 24.8-26.7in. I guess my questions are what tire size you seem to like the best, what tire model, and any setup notes that you've noticed.

07-20-2018, 09:23 AM	#2 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,397 Drives: 2009 370Z Rep Power: 16804	I just got some 18x10.5 wheels square delivered and plan to run 275/40 for now, with Nexen SUR4Gs. Depending on how that feels at track days, I might go with 285/35 Hankook R-S4's next time around. Sadly, RS4s are sold out in 275/40. I ideally wanted 295/35 but selection in that size is pretty bad Hotrodz likes this. __________________ @stupidtoycars \| My track vids 09 7AT\|MCS 2WNR\|Topgunz Rotrex\|Ecutek (Eugene)\|Maxxis RC1\|Titan-7 TS-5\|OSG LSD\|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler\|Fismo\|G-LOC R12/R10\|Zeta III L\|NLR Wing and Splitter\|CJM Pan and Fuel Hat\|Radium Surge Tank\|AP Racing CP9668

07-20-2018, 12:39 PM	#3 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	I am boosted so I run as much tire as I can on a square setup. I think you need to decide on what thread wear of tire you want run and what your expectations are for the track. If you are competing some formats state 200 thread wear tire and others 100. If it doesn't matter then there are numerous brands that are all pretty close in lap times but very in tire life with re71r being the worst for longevity and the best on lap times. The nt01s are my favorite as they are fast and they seem to wear better. I hear good thing about Maxxis and it looks like Nexen is going to come out with a wider tire selection soon! Sent from my SM-G965U using Tapatalk __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

07-20-2018, 03:15 PM	#4 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	You're going to need at least a +30 to a +36 offset to fit up front and fit a full width tire. It's going to rub unless you run some heavy camber. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

07-25-2018, 02:24 AM	#7 (permalink)
austinroberts Base Member Join Date: May 2018 Location: Salt Lake City Posts: 29 Drives: 2010 370 Nismo Rep Power: 7	@hotrods Can you post a photo with your nto3s? Hotrodz likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Different ride height same springs and wheel size	scope22	Brakes & Suspension	12	12-11-2015 07:27 AM
Lower Ride Height Resulting from Different Wheel/Tire Combo?	preR35	Wheels & Tires	9	11-20-2013 11:07 AM
BC Coilovers Ride Height	Nanoetch	DIY Section (Do-It-Yourself)	7	04-26-2012 04:54 PM
Tire question about sidewall height in relation to ride height...	chuckd05	Wheels & Tires	2	05-07-2011 05:03 AM
Ride height not even on my new Z	Aaron1	Brakes & Suspension	17	01-15-2011 04:16 PM