|
My 2 cents. 1) that's symptom of clutch fluid boiling. Add insulated clutch lines and swap to high temp fluid. Motul RBF 600, Torque RT700, Castrol SRF, and many other
|
|||||||
13Likes
|
|
LinkBack | Thread Tools | Display Modes |
07-09-2016, 03:06 PM
|
#2 (permalink) |
|
A True Z Fanatic
Join Date: Jul 2011
Location: Dallas, TX
Posts: 3,262
Drives: 09 Nismo, 16 Nismo
Rep Power: 163995   |
My 2 cents.
1) that's symptom of clutch fluid boiling. Add insulated clutch lines and swap to high temp fluid. Motul RBF 600, Torque RT700, Castrol SRF, and many other choices. 2) fast intention also makes a 34row kit. Z1 and FI both use the same Setrab core, but I believe FI has the option to add a fabricated block off plate (or just DIY something to cover the oil cooler surface when winter hits, layers of painter's tape or velcro an piece of aluminum onto the oil cooler will work). Yes thermostatic plate, as it limits oil from circulating into the cooler when oil temp is below 180F. 3) That depends on your skill level, or how good you plan to get. I'll defer to the experienced track guys
__________________
Setrab | RE-71 | SPL | JRZ | Nismo | ARK | Whiteline | RacingBrake | CJM Oil Pan | Ti shield Last edited by cv129; 07-10-2016 at 08:41 PM. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| GPS tracking | 4TthAnnyZ | Nissan 370Z General Discussions | 1 | 01-18-2015 07:19 AM |
| First Day Tracking the Z | Read T | Track / Autocross / Drifting / Dragstrip | 19 | 06-11-2014 12:47 PM |
| New Z06, first experiences... | ImportConvert | Other Vehicles | 31 | 03-18-2011 04:00 PM |
| Tracking | jaycz | Wheels & Tires | 9 | 02-11-2011 05:26 PM |
| VIN Tracking | tbonesteak | Nissan 370Z Pricing / Ordering Discussions | 5 | 07-30-2009 12:46 PM |
Threaded Mode
