Driver Side PCV Filter Assembly

Dave N · 01-17-2014, 12:51 PM

I'm looking for the PCV filter assembly for the driver's side intake. The critical item is that there should not be any cracks or fatigue on the hose nipples.

Please PM with your price shipped to 92626. Or if local in SoCal (Orange County), I can pick up the part.

Thanks in advance.

Dave

coop370z · 01-17-2014, 12:59 PM

YOu should check out the silicone replacements from Z1. assembly cracked and the silicone piece is way better and come in colors.

coop370z · 01-17-2014, 01:03 PM

Its crazy that plastic that thick cracks. I took it to the dealer and they had to order the entire intake for like $130. I found the Z1 part and dont have to worry. Good luck

Dave N · 01-17-2014, 01:06 PM

Quote:

Originally Posted by coop370z

Its crazy that plastic that thick cracks. I took it to the dealer and they had to order the entire intake for like $130. I found the Z1 part and dont have to worry. Good luck

Thanks for the suggestion. If the hoses were available from a different vendor, I would consider it. Plus, I will need the stock part when it comes time to have the car smogged.

I'm puzzled at the failure too. And naturally, it happened just as I went over warranty by 500 miles. I don't understand why Nissan doesn't make this part available separately from the intake hose assembly other than turning a $25 part into a $100+ part and getting more money.

Dave

coop370z · 01-17-2014, 01:09 PM

They hinted at my intake installation but it was a clean break just like yours but on the downward nipple. CA i see..ok gotcha. maybe try a different dealer. Like i said they covered mine in good faith i just went with these so it didnt happen again.

Dave N · 01-18-2014, 12:25 PM

Bump for the weekend crowd.

Dave N · 01-21-2014, 02:42 PM

Bump

Huck · 01-21-2014, 04:45 PM

If you get a metal 90 elbow and throw it in the two hoses you're good to go, that thing serves absolutely no purpose but to barely change the note of the stock intakes. When you go aftermarket its completely useless.

Zdayz 2014!!

01-17-2014, 12:51 PM	#1 (permalink)
Dave N Base Member Join Date: Oct 2011 Location: Orange County, CA Posts: 123 Drives: '12 PW 6M & 90 Z32TT Rep Power: 14	Driver Side PCV Filter Assembly I'm looking for the PCV filter assembly for the driver's side intake. The critical item is that there should not be any cracks or fatigue on the hose nipples. Please PM with your price shipped to 92626. Or if local in SoCal (Orange County), I can pick up the part. Thanks in advance. Dave

01-17-2014, 12:59 PM	#2 (permalink)
coop370z Base Member Join Date: Jan 2014 Location: utah Posts: 66 Drives: 12 370z Rep Power: 11	YOu should check out the silicone replacements from Z1. assembly cracked and the silicone piece is way better and come in colors. __________________ 2012 370Z MB SPORT TOURING 6MT/TAKEDA/FAST INTENTIONS/Z1/BERK/H&R/EVO-R/UPREV/SHINE/RAYS/FORGESTAR

01-17-2014, 01:03 PM	#3 (permalink)
coop370z Base Member Join Date: Jan 2014 Location: utah Posts: 66 Drives: 12 370z Rep Power: 11	Its crazy that plastic that thick cracks. I took it to the dealer and they had to order the entire intake for like $130. I found the Z1 part and dont have to worry. Good luck __________________ 2012 370Z MB SPORT TOURING 6MT/TAKEDA/FAST INTENTIONS/Z1/BERK/H&R/EVO-R/UPREV/SHINE/RAYS/FORGESTAR

01-17-2014, 01:09 PM	#5 (permalink)
coop370z Base Member Join Date: Jan 2014 Location: utah Posts: 66 Drives: 12 370z Rep Power: 11	They hinted at my intake installation but it was a clean break just like yours but on the downward nipple. CA i see..ok gotcha. maybe try a different dealer. Like i said they covered mine in good faith i just went with these so it didnt happen again. __________________ 2012 370Z MB SPORT TOURING 6MT/TAKEDA/FAST INTENTIONS/Z1/BERK/H&R/EVO-R/UPREV/SHINE/RAYS/FORGESTAR

01-21-2014, 04:45 PM	#8 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	If you get a metal 90 elbow and throw it in the two hoses you're good to go, that thing serves absolutely no purpose but to barely change the note of the stock intakes. When you go aftermarket its completely useless. Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

01-18-2014, 12:25 PM	#6 (permalink)
Dave N Base Member Join Date: Oct 2011 Location: Orange County, CA Posts: 123 Drives: '12 PW 6M & 90 Z32TT Rep Power: 14	Bump for the weekend crowd.

01-21-2014, 02:42 PM	#7 (permalink)
Dave N Base Member Join Date: Oct 2011 Location: Orange County, CA Posts: 123 Drives: '12 PW 6M & 90 Z32TT Rep Power: 14	Bump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Driver Side Sun Visor	isayimandrew	Parts for sale (Private Classifieds)	5	03-21-2013 10:17 AM
[FOR SALE] FS: OEM Red Driver Side FENDER	Carbon_z	Parts for sale (Private Classifieds)	3	05-08-2012 12:34 PM
[FOR SALE] Xenon Headlight Assembly for Pass side 2009 370Z	Iscandar	Parts for sale (Private Classifieds)	1	06-06-2011 09:48 PM
WTB: LH (Driver) Headlight Projector Assembly	DIGItonium	Wanted	0	05-25-2011 09:52 AM