2 H&R DRM 20mm Spacers

antjmcc07 · 09-07-2015, 02:58 PM

WTB 2 H&R DRM 20mm Spacers. Also open to other brands as well.

Thanks for looking.

antjmcc07 · 09-07-2015, 05:00 PM

bump

antjmcc07 · 09-08-2015, 02:16 PM

bump.

DEpointfive0 · 09-08-2015, 02:17 PM

Is that bolt on? Or stud replacement?

antjmcc07 · 09-08-2015, 03:19 PM

Quote:

Originally Posted by DEpointfive0

Is that bolt on? Or stud replacement?

Bolt on

naseem641 · 09-08-2015, 05:01 PM

Just a heads up-

I recently went w/ 20mm bolt ons all the way around and experienced a nasty shake in the wheel due to the OEM studs hitting the back of the front wheels. Some of our Z's were produced with longer studs than others. I have the sport Rays and the space in the back of the wheel still does not allow the studs to sit without any contact. Many advised on cutting my factory studs a few mm but that just sounded like a bad idea. I took a loss and sold them. Went with the stud replacements instead.

If you're looking for a pair of 20mm boltons- Id advise them only to be going on the rear. Don't make the same stupid mistake I did.

I was just banking my Z had the shorter of the studs from the factory lol....

If you are like me, and hate doing shi* twice, don't gamble with boltons on the front...

Just my .02

RumbleFish · 09-08-2015, 06:05 PM

Quote:

Originally Posted by naseem641

Just a heads up-

I recently went w/ 20mm bolt ons all the way around and experienced a nasty shake in the wheel due to the OEM studs hitting the back of the front wheels. Some of our Z's were produced with longer studs than others. I have the sport Rays and the space in the back of the wheel still does not allow the studs to sit without any contact. Many advised on cutting my factory studs a few mm but that just sounded like a bad idea. I took a loss and sold them. Went with the stud replacements instead.

If you're looking for a pair of 20mm boltons- Id advise them only to be going on the rear. Don't make the same stupid mistake I did.

I was just banking my Z had the shorter of the studs from the factory lol....

If you are like me, and hate doing shi* twice, don't gamble with boltons on the front...

Just my .02

I've got 20mm H&R bolt on spacers on my 2010 w/ Sport Rays, M6 and have no such problems. No fitment issues at all. *Installed by Specialty Z*

I've driven it pretty hard in the twisties above L.A. with no issues at all.

naseem641 · 09-08-2015, 06:13 PM

Quote:

Originally Posted by naseem641

Some of our Z's were produced with longer studs than others.

It isn't an install issue.

antjmcc07 · 09-08-2015, 10:25 PM

Quote:

Originally Posted by naseem641

Just a heads up-

I recently went w/ 20mm bolt ons all the way around and experienced a nasty shake in the wheel due to the OEM studs hitting the back of the front wheels. Some of our Z's were produced with longer studs than others. I have the sport Rays and the space in the back of the wheel still does not allow the studs to sit without any contact. Many advised on cutting my factory studs a few mm but that just sounded like a bad idea. I took a loss and sold them. Went with the stud replacements instead.

If you're looking for a pair of 20mm boltons- Id advise them only to be going on the rear. Don't make the same stupid mistake I did.

I was just banking my Z had the shorter of the studs from the factory lol....

If you are like me, and hate doing shi* twice, don't gamble with boltons on the front...

Just my .02

Thanks for the info. I'll keep that in mind. I have 25mm boltons on the rear. I wanted to do 20mm for the front. I have a 2014 w/ sport rays. I haven't had any shaking issues with the 25mm. Did you go with a different set up for the front?

git@no · 09-09-2015, 12:33 AM

Hello there sinc e u r using spacers in all corners u are tge rigth person to answer this
How safe that is,also is there any shaking on tge stering wheel at high speeds?

Sent from my iPhone using Tapatalk

antjmcc07 · 09-09-2015, 08:17 AM

Quote:

Originally Posted by git@no

Hello there sinc e u r using spacers in all corners u are tge rigth person to answer this
How safe that is,also is there any shaking on tge stering wheel at high speeds?

Sent from my iPhone using Tapatalk

Hey git@no, I have a couple of friends that have spacers on all corners with no issues at all. I found more info on spacers that could help you out in answering your question. Hope this helps.

Wheel Spacers 101

Spacers -- Bolt On vs Stud Replacement

git@no · 09-09-2015, 08:30 AM

Thanks for the info, is just that i was running ichibas bolt on no long ago with tge stocks 18" and i was feeling vibration on the stering wheels but i dont know why ?

Sent from my iPhone using Tapatalk

09-07-2015, 02:58 PM	#1 (permalink)
antjmcc07 Base Member Join Date: Apr 2015 Location: Florida Posts: 55 Drives: Pearl Z Rep Power: 10	2 H&R DRM 20mm Spacers WTB 2 H&R DRM 20mm Spacers. Also open to other brands as well. Thanks for looking.

09-08-2015, 02:17 PM	#4 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Is that bolt on? Or stud replacement? antjmcc07 likes this. __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

09-09-2015, 12:33 AM	#10 (permalink)
git@no Track Member Join Date: May 2014 Location: garden grove ca. Posts: 506 Drives: 2014 370z base model Rep Power: 12	Hello there sinc e u r using spacers in all corners u are tge rigth person to answer this How safe that is,also is there any shaking on tge stering wheel at high speeds? Sent from my iPhone using Tapatalk antjmcc07 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] (2)20mm ONEightyNYC DRM spacers, (2)15mm H&R DRM spacers	Terribleone21	Parts for sale (Private Classifieds)	4	12-17-2015 11:43 AM
[FOR SALE] Z1 20mm Spacers, H&R 15mm spacers	black_sedan	Parts for sale (Private Classifieds)	6	01-06-2014 11:08 AM
[WTB] Looking to trade 15mm and 20mm drs H&R TRAK+ spacers for drm spacers	Amelio1217	Parts for sale (Private Classifieds)	14	06-05-2013 02:04 PM
[FOR SALE] 20mm H&R Spacers - $50	Telephone	Parts for sale (Private Classifieds)	3	03-25-2013 11:57 PM
Fs: H&r 20mm rear spacers / 15mm front spacers	xbigb4ller69z	Parts for sale (Private Classifieds)	25	12-10-2010 01:20 PM

09-07-2015, 05:00 PM	#2 (permalink)
antjmcc07 Base Member Join Date: Apr 2015 Location: Florida Posts: 55 Drives: Pearl Z Rep Power: 10	bump

09-08-2015, 02:16 PM	#3 (permalink)
antjmcc07 Base Member Join Date: Apr 2015 Location: Florida Posts: 55 Drives: Pearl Z Rep Power: 10	bump.

09-08-2015, 05:01 PM	#6 (permalink)
naseem641 Base Member Join Date: Jun 2014 Location: chicago Posts: 76 Drives: 2012 370z - Rep Power: 11	Just a heads up- I recently went w/ 20mm bolt ons all the way around and experienced a nasty shake in the wheel due to the OEM studs hitting the back of the front wheels. Some of our Z's were produced with longer studs than others. I have the sport Rays and the space in the back of the wheel still does not allow the studs to sit without any contact. Many advised on cutting my factory studs a few mm but that just sounded like a bad idea. I took a loss and sold them. Went with the stud replacements instead. If you're looking for a pair of 20mm boltons- Id advise them only to be going on the rear. Don't make the same stupid mistake I did. I was just banking my Z had the shorter of the studs from the factory lol.... If you are like me, and hate doing shi* twice, don't gamble with boltons on the front... Just my .02

09-09-2015, 08:30 AM	#12 (permalink)
git@no Track Member Join Date: May 2014 Location: garden grove ca. Posts: 506 Drives: 2014 370z base model Rep Power: 12	Thanks for the info, is just that i was running ichibas bolt on no long ago with tge stocks 18" and i was feeling vibration on the stering wheels but i dont know why ? Sent from my iPhone using Tapatalk