370z badges, 3d files

INV_MY_370 · 06-22-2021, 06:08 AM

I fully designed the front and back Z badges for the people not wanting to spend the 100s of $ on them. Just curious what I should charge for the STL file. It has taken me many hours to get them this far.as there is not even a 3d file for just the 370 Z logo it self. Not asking much was thinking 5$ for the set of 2. Or if that's to much comment back and let me know what u think.

Sent from my 7 Pro using Tapatalk
[/IMG]

chowtoo · 06-22-2021, 08:27 AM

Very nice!

SeeThruHead · 06-22-2021, 11:42 AM

i'd pay 5$

cv129 · 06-22-2021, 12:59 PM

$5 is cheap….considering the amount of work goes into different measurements and designs.

How much does material and production (for a pair) cost after creating the file?

INV_MY_370 · 06-22-2021, 07:41 PM

Hard to say. I used carbon fiber pla to print. And some high end vinyl, vvivid carbon gloss resin. Really don't want to produce them ,have way to many other project in hand.

Sent from my 7 Pro using Tapatalk

INV_MY_370 · 06-22-2021, 07:42 PM

And the 5$ would just be for the STL files to print yourself.

Sent from my 7 Pro using Tapatalk

cv129 · 06-22-2021, 11:05 PM

Quote:

Originally Posted by INV_MY_370

Hard to say. I used carbon fiber pla to print. And some high end vinyl, vvivid carbon gloss resin. Really don't want to produce them ,have way to many other project in hand.

Sent from my 7 Pro using Tapatalk

Quote:

Originally Posted by INV_MY_370

And the 5$ would just be for the STL files to print yourself.

Sent from my 7 Pro using Tapatalk

My question wasn’t to lead to asking you to produce them haha.

My sister has a 3D printer, I’m just wondering how much work and material goes into doing this on my own.

INV_MY_370 · 06-26-2021, 10:53 AM

All on how u want them to look. U don't need to wrap. Just sand and paint would look good

Sent from my 7 Pro using Tapatalk

06-22-2021, 06:08 AM	#1 (permalink)
INV_MY_370 Base Member Join Date: Mar 2018 Location: Illinois Posts: 84 Drives: 2012-Gun Metallic-MT Rep Power: 3362	370z badges, 3d files I fully designed the front and back Z badges for the people not wanting to spend the 100s of $ on them. Just curious what I should charge for the STL file. It has taken me many hours to get them this far.as there is not even a 3d file for just the 370 Z logo it self. Not asking much was thinking 5$ for the set of 2. Or if that's to much comment back and let me know what u think. Sent from my 7 Pro using Tapatalk [/IMG] Last edited by INV_MY_370; 06-22-2021 at 07:11 AM.

06-22-2021, 11:42 AM	#3 (permalink)
SeeThruHead Track Member Join Date: Jun 2020 Location: Toronto Posts: 716 Drives: Red '18 Sport Manual Rep Power: 23498	i'd pay 5$ cv129 likes this. __________________ My Build thread STH Build Plan Thread Images too big fix here

06-22-2021, 12:59 PM	#4 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,222 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	$5 is cheap….considering the amount of work goes into different measurements and designs. How much does material and production (for a pair) cost after creating the file? Jap**Vet* likes this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Datsun Badges for 370z	Cory Gillmore	Exterior & Interior	15	12-05-2019 08:28 AM
[FOR SALE] 2015 370z pearl white front and rear bumper with badges and DRL	jordanserrano	Parts for sale (Private Classifieds)	19	12-11-2016 09:43 AM
DXF or DWG Logo files.	Daishi9000	Nissan 370Z General Discussions	0	01-28-2016 09:15 PM
[FOR SALE] 2010 370z Bumpers- EVO-R Badges	makstraw	Parts for sale (Private Classifieds)	11	10-09-2014 10:37 AM
[FOR SALE] Black 370z Badges	Gismo	Parts for sale (Private Classifieds)	4	03-18-2014 10:38 AM

06-22-2021, 08:27 AM	#2 (permalink)
chowtoo Base Member Join Date: Jun 2018 Location: S. E. MI Posts: 153 Drives: Red2018 M6, 2019 A7 Rep Power: 4596	Very nice!

06-22-2021, 07:41 PM	#5 (permalink)
INV_MY_370 Base Member Join Date: Mar 2018 Location: Illinois Posts: 84 Drives: 2012-Gun Metallic-MT Rep Power: 3362	Hard to say. I used carbon fiber pla to print. And some high end vinyl, vvivid carbon gloss resin. Really don't want to produce them ,have way to many other project in hand. Sent from my 7 Pro using Tapatalk

06-22-2021, 07:42 PM	#6 (permalink)
INV_MY_370 Base Member Join Date: Mar 2018 Location: Illinois Posts: 84 Drives: 2012-Gun Metallic-MT Rep Power: 3362	And the 5$ would just be for the STL files to print yourself. Sent from my 7 Pro using Tapatalk

06-26-2021, 10:53 AM	#8 (permalink)
INV_MY_370 Base Member Join Date: Mar 2018 Location: Illinois Posts: 84 Drives: 2012-Gun Metallic-MT Rep Power: 3362	All on how u want them to look. U don't need to wrap. Just sand and paint would look good Sent from my 7 Pro using Tapatalk