steering lock fuse pull

cf370z

is it normal after removing steering lock fuse for the intel.key light to stay lit up?

kenchan

TreeSemdyZee

Mine didn't. Did you have the ignition in the "On" position when you pulled the fuse?

__________________
Borla S-Type | Motordyne | Z1 (lots) | South Bend | K&N | Nismo/Nismo S-Tune | Eibach | Aerojacket | Fujimara | Spl | ZSpeed Performance | Kenwood-Infinity-Sound Ordnance | Whiteline | Ecutek | Hotchkis | Clazzio | VQ Vortex |Morimoto XB |Dynosty Tune 329.64hp 265.73 ft/lb

cf370z

yes I redid it to make sure it was in acc and I still have the light .light stays on all time even when car off and walk away from it. I just replaced bcm . may be other issue , as I now cant open my hatch . and I been looking for the fuse if anyone know the location of the fuse please tell me I cant find one marked for hatch . I know where wires are in bcm for it but cant find fuse . bcm got water in it from wiring harness from car wash . had replace bcm , now hatch don't work and have the key light on but car recognizes the key. starts fine .drives fine just light on and hatch switch not working . I got to find fuse to see if its blown or if the switch itself shorted so I can repair it .

kenchan

u pushed the button twice (without clutch depressed) when u pulled da fuse?

acc is only one push..no?

cf370z

I only put it in acc and pulled , no clutch, do I need it in the on ? I thought everything I read said to be in acc pull fuse?

kenchan

no, it needs to be in da ON position.

cf370z

ok I will re do it see if it goes out , it may not may be somethng else that got messed up with the bcm .tnks

cf370z

yea tried both ways now still on so , something eles

SouthArk370Z

Invest in a multimeter (AKA VOM). A cheap one will do. You can find them at hardware/auto parts/department stores for less than $20. Then you can check for voltage to the latch solenoid at the BCM and the solenoid. And you can check the switch input, too.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

cf370z

I got one I just haven't got that far in tring trouble shoot it I know where wires are on bcm, but haven't pulled the cover to check for voltage . I just don't know why it would work before the bcm replacement and not after . and I checked every single fuse in car no blown fuses no where I check three times .im not sure what needed done when they replaced it besides putting vin number on bcm , I don't know if any other program needed to be done at same time they coded a spare key also so I don't know whats up but I will be checking bcm voltage.