Ok, so the first freeze of the year happened and my windows froze, making closing the driver door impossible. The window wouldn't recess. When the thaw happened a few hours
|
|
LinkBack | Thread Tools | Display Modes |
12-20-2016, 08:44 PM | #1 (permalink) |
Base Member
Join Date: Oct 2016
Location: Louisville
Posts: 5
Drives: 2016 370z black
Rep Power: 9 |
Help
Ok, so the first freeze of the year happened and my windows froze, making closing the driver door impossible. The window wouldn't recess. When the thaw happened a few hours later the window recesses but doesn't go back up when I close the door. Any help is appreciated.
|
12-20-2016, 11:14 PM | #2 (permalink) |
Premium Member
Join Date: Dec 2009
Location: Kentuck-IANA
Age: 60
Posts: 4,885
Drives: '09 370 & ‘14 Juke
Rep Power: 27409 |
Try rolling the window all of the way down then back up. Then see how it reacts when you bring close the door.
My parking brakes were frozen yesterday morning. Car wouldn't move.
__________________
Borla S-Type | Motordyne | Z1 (lots) | South Bend | K&N | Nismo/Nismo S-Tune | Eibach | Aerojacket | Fujimara | Spl | ZSpeed Performance | Kenwood-Infinity-Sound Ordnance | Whiteline | Ecutek | Hotchkis | Clazzio | VQ Vortex |Morimoto XB |Dynosty Tune 329.64hp 265.73 ft/lb |
12-21-2016, 02:42 PM | #4 (permalink) |
Track Member
Join Date: Aug 2010
Location: Los Angeles
Posts: 906
Drives: 2010 Black 370Z MT
Rep Power: 305 |
Try this:
Proper procedure, manual page 2-41: If the windows do not close automatically If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Push the ignition switch to the ON position. 2. Close the door. 3. Open the window completely by operating the power window switch. 4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely. 5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. 6. Perform steps 2 through 5 above for other windows. If the power window automatic function does not operate properly after performing the procedure above, have your vehicle checked by a NISSAN dealer. |
12-22-2016, 08:03 AM | #6 (permalink) |
Base Member
Join Date: Sep 2016
Location: Nebraska
Posts: 47
Drives: 11 370Z GMG 6mt
Rep Power: 9 |
This is something I hate about frame-less windows. My e36 M3 is the same way. I use this on my bimmer; the Z is tucked away so I haven't experienced the freezing problem yet.
Nextzett Rubber Care Stick Gummi Pflege, gummi pflege It helps but I can't say it will completely prevent freezing/sticking windows. |
12-22-2016, 10:53 AM | #7 (permalink) |
Enthusiast Member
Join Date: Apr 2012
Location: Chicago
Posts: 397
Drives: 2010 Nissan 370Z
Rep Power: 14 |
I still have some Gummi Pflege left from when I owned a Bimmer. I still use it on the Z and haven't had any issues with freezing. Then again, I only take it out in decent weather and it is garage kept. Never had any problems with the Bimmer freezing during 10 years of ownership.
|
12-22-2016, 12:21 PM | #9 (permalink) |
A True Z Fanatic
Join Date: Apr 2012
Location: SoCal
Posts: 6,236
Drives: WELL ZED PW 6MT
Rep Power: 53241 |
If the reset procedure described by jaedub does not work, try removing the battery terminal for a few seconds and then do the reset. Happened to me recently.
__________________
>MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete
|
Bookmarks |
|
|