Hey guys, I'm going to give you the short version of this story...I'm looking for advice from you guys because I honestly don't know what to do. Today I went
|
|
LinkBack | Thread Tools | Display Modes |
02-26-2016, 04:52 PM | #1 (permalink) |
Base Member
Join Date: Nov 2015
Location: Akron, OH
Posts: 159
Drives: 2009 370z
Rep Power: 10 |
Fly1 Duckbill Wing Install - HELP!!!!
Hey guys,
I'm going to give you the short version of this story...I'm looking for advice from you guys because I honestly don't know what to do. Today I went to a custom body shop to have my Fly1 carbon fiber duckbill wing installed. I was quoted for an hour for the install so I said I would wait around for it to be done....well it took 2.5 hours and they charged me $189 to install the stupid thing when they said it would only take an hour and would cost about $70... After it was all said and done, I go out to inspect the wing and they mounted it off-center....now idk about you guys but this is completely unacceptable....they mounted the wing using 4 bolts in the 4 holes that fly1 puts on the bottom of these wings. I have a Z that does not have factory holes already drilled, so somehow when they tried to line up the wing, they did so off center about a half inch or quarter inch... To rectify the situation...they offered me $25 off the install ($25 f&*#ing dollars?!) or to reinstall it and plug the holes...So then I'll have 8 god damn holes in my trunk if I ever decide to take the duckbill off... What would you guys do if you were in my situation? - I attached the picture twice in case one was too big or too small to see.
__________________
"It's nice to be important...but it's more important to be nice." |
02-26-2016, 05:11 PM | #2 (permalink) |
Track Member
Join Date: Sep 2013
Location: Brookston, IN
Age: 54
Posts: 683
Drives: '12 PW Touring Sport
Rep Power: 619 |
Well that sucks. It's definitely not on center and $25 off the install is BS. Hopefully they can just slot the holes they made to get it centered up. It doesn't look off enough to need 4 need holes. I think they should fix it and drop all fees for screwing up your car.
__________________
NISMO R Tune Intakes \ Fast Intentions RHFC \ Borla CBE \ EcuTek Tuned\ SPL Camber Arms \ Powertrix Coilovers \ Swift Springs \ Avant Garde \ Wicked CAS \ Morimoto XB Halos \ Custom Fenders \ Hotchkis Sways \ NLP Splitter |
02-26-2016, 05:42 PM | #4 (permalink) |
Base Member
Join Date: Jan 2015
Location: Clovis Cali
Posts: 240
Drives: 12 370z sport 6mt GM
Rep Power: 10 |
I agree, they did a really bad job
__________________
Fast Intentions Non res CF, CF Duckbill, Stillen G3, Fujimura Diffuser, Swift Springs, 180 Headlights, Forgestar F14Bronze |
02-26-2016, 05:44 PM | #5 (permalink) |
Track Member
Join Date: Jan 2014
Location: Palm Bay, Florida
Posts: 706
Drives: 11 Nissan 370z bs a7
Rep Power: 12 |
yep very bad. I helped the shop I went to line it up... we created sort of a template before we even drilled.
Id be pissed too.
__________________
2011 370 Z Ark - Seibon - Aerojacket - Pioneer - Evo-R - Stance
|
02-26-2016, 06:26 PM | #6 (permalink) |
Elite Member
Join Date: Jun 2012
Location: Calgary
Posts: 13,971
Drives: 14 PW 370Z S/T MT
Rep Power: 243722 |
Only you know if you can live with that. If you can not, then you know the answer already without our input.
__________________
Member of kenchan's "photoshopped mods" and "proper offsets" gang.
|
02-26-2016, 08:23 PM | #7 (permalink) |
A True Z Fanatic
Join Date: Apr 2012
Location: SoCal
Posts: 6,235
Drives: WELL ZED PW 6MT
Rep Power: 53241 |
It'll bug me. There's a way to install that thing. Clearly not test fitted properly. Sorry for your troubles.
__________________
>MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete
|
02-26-2016, 08:37 PM | #8 (permalink) |
A True Z Fanatic
Join Date: Aug 2010
Location: SoCal-IE
Posts: 1,890
Drives: PGraphite m6
Rep Power: 255 |
Sorry but find another shop
These guys obviously don't care for attention to detail Crooks!!!
__________________
///MPPSK///M Performance FRONT SPLITTER///M Performance KIDNEY GRILLS///MPerformance CF MIRRORS///MPerformance CF SPOILER///AC SCHNITZER
|
02-27-2016, 07:08 AM | #10 (permalink) |
Enthusiast Member
Join Date: Jan 2014
Location: ALABAMA
Posts: 305
Drives: 09 NISSAN 370Z CS M6
Rep Power: 3400 |
I really cannot add more than what others have said.
I do all my own installs just because of stuff like what happened to you. Of course,we all do not have the same skills/tools when it comes to doing things. Looking at the big picture,as I am a guy that is much older than the average Z owner,I worry about the lack of skills or the willing to learn, take the time to do the job yourself from some younger owners. Rather have a friend or a shop do it. Get off the phone and other stuff and learn. By the way, the install does look like crap. It would drive me crazy as is. |
02-27-2016, 09:37 AM | #11 (permalink) |
A True Z Fanatic
Join Date: Apr 2012
Location: SoCal
Posts: 6,235
Drives: WELL ZED PW 6MT
Rep Power: 53241 |
You have two issues. It is not centered and it is not leveled. Off by as much as 3/16 to a quarter of an inch. You will need to dremel the holes larger starting at 12 o'clock going to 3 o'clock. If they did not use tape on the far edges of the wing and tightened the sh!t out of it, you might see some paint damage. Good luck.
Edit: with the enlarged holes use rubber washers along with the metal ones to keep water from seeping through.
__________________
>MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete
Last edited by axmea?; 02-27-2016 at 09:42 AM. |
02-27-2016, 09:42 AM | #12 (permalink) |
A True Z Fanatic
Join Date: Jan 2016
Location: Indian Lake Estates Fl
Posts: 1,049
Drives: 14 370Z TS Roadster
Rep Power: 19127 |
Like others have said it is off center & crooked but not by too much. Larger holes should give you enough to get it straight.
I just installed my spoiler a couple of weeks ago & drilled the holes a little oversize to allow for final alignment. Yours looks like it needs to go about an 1/8" to the right which isn't that much. |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[FOR SALE] Brand new CF Type 3 duckbill from fly1 | Aznjay83 | Parts for sale (Private Classifieds) | 7 | 01-27-2016 02:58 PM |
[FOR SALE] NEW AeroJacket Type 3 CF Duckbill Wing | Glokwork | Parts for sale (Private Classifieds) | 2 | 07-20-2015 10:06 AM |
Duckbill install | paratrooper | Nissan 370Z General Discussions | 14 | 11-08-2014 04:42 PM |
Duckbill spoiler/wing | jlask370 | Exterior & Interior | 8 | 09-07-2014 12:01 AM |
[WTB] Aerojacket type III duckbill wing | BrandonSS | Parts for sale (Private Classifieds) | 44 | 01-08-2014 05:58 PM |