Stillen gen 3 intakes installed!! (On a Nismo)

John08 · 03-15-2013, 11:01 AM

I got them on, could it be me, but when I went out for a ride after installing them. The sound and power were there, the only thing I noticed is that my mph were going up pretty slow then normal,like if something was holding the car down, like if it was dragging and yes I had my windows up and my a/c off. Is this normal or is it just me? Btw no check engine light on, nothing. Rpm go up normal its just the Speed, I noticed a in change.

DEpointfive0 · 03-15-2013, 11:08 AM

You lose low end HP and Torque, congrats

You should have disconnected your negative terminal during installation. If you didn't, do it, and leave your doors or lights on to drain any residual electricity, then reconnect. You know you have done it properly if you lose all your radio stations

AND you'll have to let the ECU relearn...and before you and ask... No, I don't know how long it takes for the ECU to learn, I'd guess 75-150 miles though
Some may say a certain number or start cycles

John08 · 03-15-2013, 11:22 AM

I disconnected the the (-)terminal . The time, radio stations and even the A/B milage rested. If I dosconnect the battery and let it drain will it fix the problem? Or what do u think?

DEpointfive0 · 03-15-2013, 11:26 AM

Like I put in your other thread:
Google, damn thing works miracles

2nd link

We've been here for about 4 years, we PRETTY MUCH have a thread for everything. Especially when it comes to intakes, exhausts, dynos, brake pads, oil, coolant... Actually... We have a thread for 99.99% of any topic, LOL

John08 · 03-15-2013, 11:36 AM

Thank you, it was helpful, I'll just disconnect the negative terminal and see. I saw that you can reset the ecu.

John08 · 03-15-2013, 11:38 AM

I guess it's normal, it's just the ecu need to get use to the mod. Lol

MJB · 03-15-2013, 12:36 PM

Quote:

Originally Posted by John08

I disconnected the the (-)terminal . The time, radio stations and even the A/B milage rested. If I dosconnect the battery and let it drain will it fix the problem? Or what do u think?

No, its normal... the Nismo is just slow... just do what everybody else on this forum does and go buy a Mustang

tjlazer · 03-15-2013, 12:47 PM

make sure you pad the a/c line or you will be sorry.

dmhenderson · 03-16-2013, 01:37 AM

Quote:

Originally Posted by MJB

No, its normal... the Nismo is just slow... just do what everybody else on this forum does and go buy a Mustang

~trolls~

Key being "Do what everyone else is doing" which is fine if you want to...y'know, be like everybody else I guess

Baer383 · 03-16-2013, 05:43 PM

Is this the thread where the site bandwith went.

LakeShow · 03-18-2013, 02:30 AM

Quote:

Originally Posted by MJB

No, its normal... the Nismo is just slow... just do what everybody else on this forum does and go buy a Mustang

We all might as well snort Cocaine while we're at it, everyone else is doing it.

dmhenderson · 03-18-2013, 08:49 AM

I learned it from YOU dad!

Sent from my iPhone using Tapatalk

03-15-2013, 11:01 AM	#1 (permalink)
John08 Base Member Join Date: Jun 2012 Location: Mesa, Az Posts: 27 Drives: 12 Nissan 370z GM m6 Rep Power: 13	Stillen gen 3 intakes installed!! (On a Nismo) I got them on, could it be me, but when I went out for a ride after installing them. The sound and power were there, the only thing I noticed is that my mph were going up pretty slow then normal,like if something was holding the car down, like if it was dragging and yes I had my windows up and my a/c off. Is this normal or is it just me? Btw no check engine light on, nothing. Rpm go up normal its just the Speed, I noticed a in change.

03-15-2013, 11:08 AM	#2 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	You lose low end HP and Torque, congrats You should have disconnected your negative terminal during installation. If you didn't, do it, and leave your doors or lights on to drain any residual electricity, then reconnect. You know you have done it properly if you lose all your radio stations AND you'll have to let the ECU relearn...and before you and ask... No, I don't know how long it takes for the ECU to learn, I'd guess 75-150 miles though Some may say a certain number or start cycles __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language: Last edited by DEpointfive0; 03-15-2013 at 11:11 AM.

03-15-2013, 11:26 AM	#4 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Like I put in your other thread: Google, damn thing works miracles 2nd link We've been here for about 4 years, we PRETTY MUCH have a thread for everything. Especially when it comes to intakes, exhausts, dynos, brake pads, oil, coolant... Actually... We have a thread for 99.99% of any topic, LOL __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

03-15-2013, 12:47 PM	#8 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 53 Posts: 2,496 Drives: Z34, R35 Rep Power: 20	make sure you pad the a/c line or you will be sorry. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

03-16-2013, 05:43 PM	#10 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	Is this the thread where the site bandwith went. __________________ 2013 ZL1 754 rwhp 747 rwtq Last edited by Baer383; 03-16-2013 at 05:47 PM.

03-15-2013, 11:22 AM	#3 (permalink)
John08 Base Member Join Date: Jun 2012 Location: Mesa, Az Posts: 27 Drives: 12 Nissan 370z GM m6 Rep Power: 13	I disconnected the the (-)terminal . The time, radio stations and even the A/B milage rested. If I dosconnect the battery and let it drain will it fix the problem? Or what do u think?

03-15-2013, 11:36 AM	#5 (permalink)
John08 Base Member Join Date: Jun 2012 Location: Mesa, Az Posts: 27 Drives: 12 Nissan 370z GM m6 Rep Power: 13	Thank you, it was helpful, I'll just disconnect the negative terminal and see. I saw that you can reset the ecu.

03-15-2013, 11:38 AM	#6 (permalink)
John08 Base Member Join Date: Jun 2012 Location: Mesa, Az Posts: 27 Drives: 12 Nissan 370z GM m6 Rep Power: 13	I guess it's normal, it's just the ecu need to get use to the mod. Lol

03-18-2013, 08:49 AM	#12 (permalink)
dmhenderson A True Z Fanatic Join Date: Feb 2011 Location: Maryland Posts: 5,930 Drives: AWD TT 370z Rep Power: 26	I learned it from YOU dad! Sent from my iPhone using Tapatalk __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
installed Nismo cold air intakes	jcasti07	Intake/Exhaust	1	01-23-2013 10:56 AM
Just installed Stillen G3 Intakes	bebenegro	Intake/Exhaust	16	03-11-2012 07:01 PM
Just installed my Stillen G3 Intakes	FastPaced	Intake/Exhaust	0	06-19-2011 12:28 AM
WTB: Stillen G3 Intakes or K&N Typhoon intakes!	gromano	Parts for sale (Private Classifieds)	5	07-15-2010 09:38 PM
Nismo, Stillen, K&N & Jim Wolf Intakes & Filters, At The 370ZSOURCE!!!!!	Michael@TheZStore	Intake/Exhaust	2	06-19-2009 04:48 PM