Nismo diff cover

klill001 · 03-15-2012, 01:56 PM

Has anyone installed a NISMO DIFF cover on their NISMOZ? Dealership wanted $600 to install, due to they said "we have to drop the rear axle to install the part". The only thing I can figure is due to the extra braces that are installed on the NISMO. I have not jacked my car up to see if there is space to swap the the covers yet, however this seems high just to swap out the diff cover. They said if it was a regular 370Z there would be no problem and would not have to drop the rear axle.

martin82 · 03-15-2012, 05:44 PM

I dont own a nismo but I smell bs lol dont know.

MJB · 03-15-2012, 06:18 PM

600?!?! Wow... Its not really a hard job if you have the right tools. You have to unbolt the drive shaft, then the 2 axles from the diff. The pumpkin itself is only held in by 3 bolts. I was able to remove the pumpkin myself in my garage in about 2 hours. I didn't install the diff cover though, but it can't be that hard.

*forgot to say you'll have to remove the midpipes and may have to remove the swaybar... can't exactly remember.

The Nismo doesn't have any additional braces compared to the other trims,... has a rear damper but I don't believe that has to be removed.

klill001 · 03-15-2012, 09:03 PM

Thanks, I've done this on previously owned 350 and G35, just can't see having to drop the axle for acces. I'll definately have to jack the Z up this weekend and take a look.

Mozen · 03-16-2012, 06:15 PM

Not worth 600 IMO, Secret Service Auto in Houston did it while installing my Carbonetics LSD and their labor+Fluids was around 400 if i remember right and that was really labor to do the LSD which took longer than just the cover... If you need i can go hunt through receipts for the exact price but it shouldn't cost more than 200-300 im thinking with fluid.

L33T Z34 · 07-25-2013, 05:41 AM

The dealersh!+ is full of sh!t, like usual. Nismo trim or not, you have to remove the rear diff to swap out teh AL rear cover, since the rear mounting stud goes into/through it. It's not worth doing unless you go to a lower final drive or install a "real" LSD.

chii370 · 07-31-2013, 08:32 PM

I have it, 600 is ******** to install, its about as time consuming to do as changing 4 tires. FYI though I would watch out on this one depending what aftermarket exhaust you might decide to put on, it takes up a LITTLE more realistate because of the fins. and its not really even a viable option unless you track religiously. kind of a waste of money actually. its a viscous rear, uses fluid. I got it just to say I have everything available from nismo for the car.

L33T Z34 · 09-01-2013, 10:47 PM

Quote:

Originally Posted by chii370

I have it, 600 is ******** to install, its about as time consuming to do as changing 4 tires. FYI though I would watch out on this one depending what aftermarket exhaust you might decide to put on, it takes up a LITTLE more realistate because of the fins. and its not really even a viable option unless you track religiously. kind of a waste of money actually. its a viscous rear, uses fluid. I got it just to say I have everything available from nismo for the car.

I'm curious just what aftermarket Xhaust would hit these fins

I doubt any aftermarket Xhaust would come close....

chii370 · 09-02-2013, 09:19 PM

about to find that out actually, getting an ARK DT-S. If it hits, I will be quite poopy pants.

Mozen · 09-03-2013, 12:43 PM

I know for a fact that my motordyne did and I had to cut away quite a few fins with my dremel.

Sent from my Nexus 7 using Tapatalk 2

12nismo · 09-03-2013, 04:49 PM

I installed the nismo diff cover when I changed out my gears and am also running the Fast Intentions Exhaust and I've never had a clearance issue. Hope this helps.

L33T Z34 · 09-04-2013, 01:46 AM

Quote:

Originally Posted by Mozen

I know for a fact that my motordyne did and I had to cut away quite a few fins with my dremel.

Sent from my Nexus 7 using Tapatalk 2

Sux for Moto Dyne then...

SurfDog · 09-04-2013, 02:19 AM

Berk also fits with no issue.

03-15-2012, 01:56 PM	#1 (permalink)
klill001 Base Member Join Date: Oct 2011 Location: Fort Knox Posts: 13 Drives: 2011 NISMOZ Rep Power: 14	Nismo diff cover Has anyone installed a NISMO DIFF cover on their NISMOZ? Dealership wanted $600 to install, due to they said "we have to drop the rear axle to install the part". The only thing I can figure is due to the extra braces that are installed on the NISMO. I have not jacked my car up to see if there is space to swap the the covers yet, however this seems high just to swap out the diff cover. They said if it was a regular 370Z there would be no problem and would not have to drop the rear axle.

03-15-2012, 05:44 PM	#2 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	I dont own a nismo but I smell bs lol dont know. carlitos_370z likes this.

03-15-2012, 06:18 PM	#3 (permalink)
MJB A True Z Fanatic Join Date: Aug 2011 Location: Tacoma, WA Age: 41 Posts: 1,498 Drives: a POS truck Rep Power: 496	600?!?! Wow... Its not really a hard job if you have the right tools. You have to unbolt the drive shaft, then the 2 axles from the diff. The pumpkin itself is only held in by 3 bolts. I was able to remove the pumpkin myself in my garage in about 2 hours. I didn't install the diff cover though, but it can't be that hard. forgot to say you'll have to remove the midpipes and may have to remove the swaybar... can't exactly remember. The Nismo doesn't have any additional braces compared to the other trims,... has a rear damper but I don't believe that has to be removed. Wonka2581 and Zcutty69 like this. Last edited by MJB; 03-15-2012 at 06:25 PM.*

03-16-2012, 06:15 PM	#5 (permalink)
Mozen Track Member Join Date: Jun 2010 Location: Newport News, VA Posts: 820 Drives: Nissan 370z PW M6 Rep Power: 18	Not worth 600 IMO, Secret Service Auto in Houston did it while installing my Carbonetics LSD and their labor+Fluids was around 400 if i remember right and that was really labor to do the LSD which took longer than just the cover... If you need i can go hunt through receipts for the exact price but it shouldn't cost more than 200-300 im thinking with fluid. __________________ PW 370z \| AEM \| MISHIMOTO \| ARK PERFORMANCE \| WHITELINE \| NISMO \| STILLEN \| FORGESTAR \| BC RACING \| AMS \| NON STOP TUNING \| CARBONETICS LSD \| 4 Point DOM 1.75" SCCA Spec Roll Bar + Harness Bar CHECK OUT MY BUILD THREAD HERE

09-03-2013, 12:43 PM	#10 (permalink)
Mozen Track Member Join Date: Jun 2010 Location: Newport News, VA Posts: 820 Drives: Nissan 370z PW M6 Rep Power: 18	I know for a fact that my motordyne did and I had to cut away quite a few fins with my dremel. Sent from my Nexus 7 using Tapatalk 2 __________________ PW 370z \| AEM \| MISHIMOTO \| ARK PERFORMANCE \| WHITELINE \| NISMO \| STILLEN \| FORGESTAR \| BC RACING \| AMS \| NON STOP TUNING \| CARBONETICS LSD \| 4 Point DOM 1.75" SCCA Spec Roll Bar + Harness Bar CHECK OUT MY BUILD THREAD HERE

03-15-2012, 09:03 PM	#4 (permalink)
klill001 Base Member Join Date: Oct 2011 Location: Fort Knox Posts: 13 Drives: 2011 NISMOZ Rep Power: 14	Thanks, I've done this on previously owned 350 and G35, just can't see having to drop the axle for acces. I'll definately have to jack the Z up this weekend and take a look.

07-25-2013, 05:41 AM	#6 (permalink)
L33T Z34 Banned Join Date: Jun 2010 Location: Ahnald, MO Age: 47 Posts: 387 Drives: 09 K51 G C Bw/S 6MT Rep Power: 0	The dealersh!+ is full of sh!t, like usual. Nismo trim or not, you have to remove the rear diff to swap out teh AL rear cover, since the rear mounting stud goes into/through it. It's not worth doing unless you go to a lower final drive or install a "real" LSD.

07-31-2013, 08:32 PM	#7 (permalink)
chii370 Track Member Join Date: Jul 2010 Location: . Posts: 642 Drives: . Rep Power: 16	I have it, 600 is ******** to install, its about as time consuming to do as changing 4 tires. FYI though I would watch out on this one depending what aftermarket exhaust you might decide to put on, it takes up a LITTLE more realistate because of the fins. and its not really even a viable option unless you track religiously. kind of a waste of money actually. its a viscous rear, uses fluid. I got it just to say I have everything available from nismo for the car.

09-02-2013, 09:19 PM	#9 (permalink)
chii370 Track Member Join Date: Jul 2010 Location: . Posts: 642 Drives: . Rep Power: 16	about to find that out actually, getting an ARK DT-S. If it hits, I will be quite poopy pants.

09-03-2013, 04:49 PM	#11 (permalink)
12nismo Base Member Join Date: Apr 2012 Location: Houston, TX Posts: 153 Drives: 2012 370z nismo Rep Power: 15	I installed the nismo diff cover when I changed out my gears and am also running the Fast Intentions Exhaust and I've never had a clearance issue. Hope this helps. __________________ nismo Z34 12 0209 JTran Motorsports//Stillen//Fast Intentions//EcuTek//Z1 Motorsports//Eibach//BRIDE //Zspeed//Carbon Signal//Houston Halos//Southbend//Whiteline//TWM//NonStopTuning//Doran Racing

09-04-2013, 02:19 AM	#13 (permalink)
SurfDog A True Z Fanatic Join Date: May 2012 Location: Colorado (9000 feet) Age: 56 Posts: 1,796 Drives: 09 6mt, 13 Sequoia, Rep Power: 15749	Berk also fits with no issue. __________________ 09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Brand New Cusco RS LSD, Nismo Diff Cover, Axle Stubs, and more	kabro91	Parts for sale (Private Classifieds)	4	09-17-2012 01:34 AM
WTT: My Base Diff + Cash for Your Sport Diff	aadosx	South East Region	0	04-27-2011 06:41 PM
WTT: My Base Diff + Cash for Your Sport Diff	aadosx	Parts for sale (Private Classifieds)	11	04-27-2011 06:40 PM
WTB: Red Nismo Engine Cover (original only, not painted) - $100 to you + silver cover	'10Anamoly	Wanted	0	11-05-2010 08:33 AM
Z34/370Z air-cooling fin equipped diff. rear cover	AK370Z	Engine & Drivetrain	2	04-13-2009 11:35 AM