Aftermarket Oil cooler

jcasti07 · 04-21-2015, 04:48 PM

Hey guys,

Tried search, but couldn't find any definitive answers. What's the general consensus on an aftermarket oil cooler for a '12 nismo. I'm wanting to start some HPDE and this is on my list among other things. I saw the Mishimoto option and it looks promising but pricy.

Z1 any good? I'm also not too sure on the difference of 19 row vs 25 row. Any info/ advice is appreciated.

DEpointfive0 · 04-21-2015, 04:50 PM

Z1, no MiSHITimoto.

25 or 34 row

jcasti07 · 04-21-2015, 05:52 PM

Thanks DE. Ive read enough of your posts to trust your opinion

bbermann · 04-21-2015, 06:15 PM

Slight hijack, if you don't mind...

I am in the same boat as to wanting to track the Z and would like to know if these oil coolers would fit with the Stillen Gen 3 intake installed or if there might be some conflict with the real estate up there.

DEpointfive0 · 04-21-2015, 06:21 PM

Quote:

Originally Posted by bbermann

Slight hijack, if you don't mind...

I am in the same boat as to wanting to track the Z and would like to know if these oil coolers would fit with the Stillen Gen 3 intake installed or if there might be some conflict with the real estate up there.

I've installed both with no problem.

You have a Nismo, I think you have to swap your front dampener around or something

TerribleONE · 04-21-2015, 06:29 PM

Fast Intentions FTW

Rusty · 04-21-2015, 07:33 PM

Z1 34 row cooler and be done with it. And yes, it fits with the G3's. Read my journal.

Spooler · 04-21-2015, 11:02 PM

Z1 or FI. I do like the FI Teflon braided lines. I have used them before and they flat out last.

BOLIO 671 · 04-22-2015, 09:55 AM

I have used both Fast Intentions and Z1 Oil Cooler Kits......both are good quality. Dont waste ur time with the 19 row. ...25-34 is where u wanna go....size will depend on ur weather conditions and how hard u track/drive ur car. I initially did 25 row Z1....but after tracking the car I found myself having to cool the car dwn a little before going back out again.....25 ROW would be good for daily and some spirited driving with very mild tracking in hot weather.

Then again I live in an area with tropical hot and humid weather year round....so upgraded to FI's 34 ROW and happy with it. I can do back to back non stop track runs and the oil temp never goes past 200°

As far as install in the Nismo....Vipor did a very good DIY......and yes u will have to flip ur Damper upside dwn for the 34 row to fit.

Here's Viper ' s thread
DIY: Oil Cooler Installation on a Nismo (Damper Included!) - vipor

DEpointfive0 · 04-22-2015, 10:39 AM

Quote:

Originally Posted by TerribleONE

Fast Intentions FTW

You know, I forgot FI made one too.

Z1 or FI FTW

04-21-2015, 04:48 PM	#1 (permalink)
jcasti07 Base Member Join Date: Feb 2012 Location: El Paso Posts: 171 Drives: red '15 Mustang GT Rep Power: 13	Aftermarket Oil cooler Hey guys, Tried search, but couldn't find any definitive answers. What's the general consensus on an aftermarket oil cooler for a '12 nismo. I'm wanting to start some HPDE and this is on my list among other things. I saw the Mishimoto option and it looks promising but pricy. Z1 any good? I'm also not too sure on the difference of 19 row vs 25 row. Any info/ advice is appreciated.

04-21-2015, 04:50 PM	#2 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Z1, no MiSHITimoto. 25 or 34 row jcasti07 likes this. __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

04-21-2015, 05:52 PM	#3 (permalink)
jcasti07 Base Member Join Date: Feb 2012 Location: El Paso Posts: 171 Drives: red '15 Mustang GT Rep Power: 13	Thanks DE. Ive read enough of your posts to trust your opinion JARblue and DEpointfive0 like this.

04-21-2015, 06:15 PM	#4 (permalink)
bbermann Base Member Join Date: Feb 2015 Location: Wauconda, IL Posts: 218 Drives: '13 370Z nismo Rep Power: 21	Slight hijack, if you don't mind... I am in the same boat as to wanting to track the Z and would like to know if these oil coolers would fit with the Stillen Gen 3 intake installed or if there might be some conflict with the real estate up there. DEpointfive0 likes this.

04-21-2015, 06:29 PM	#6 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	Fast Intentions FTW __________________ 638WHP 541WTQ @ 13.5PSI Build thread

04-21-2015, 07:33 PM	#7 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,218 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Z1 34 row cooler and be done with it. And yes, it fits with the G3's. Read my journal. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

04-21-2015, 11:02 PM	#8 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Z1 or FI. I do like the FI Teflon braided lines. I have used them before and they flat out last.

04-22-2015, 09:55 AM	#9 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	I have used both Fast Intentions and Z1 Oil Cooler Kits......both are good quality. Dont waste ur time with the 19 row. ...25-34 is where u wanna go....size will depend on ur weather conditions and how hard u track/drive ur car. I initially did 25 row Z1....but after tracking the car I found myself having to cool the car dwn a little before going back out again.....25 ROW would be good for daily and some spirited driving with very mild tracking in hot weather. Then again I live in an area with tropical hot and humid weather year round....so upgraded to FI's 34 ROW and happy with it. I can do back to back non stop track runs and the oil temp never goes past 200° As far as install in the Nismo....Vipor did a very good DIY......and yes u will have to flip ur Damper upside dwn for the 34 row to fit. Here's Viper ' s thread DIY: Oil Cooler Installation on a Nismo (Damper Included!) - vipor __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OEM oil cooler removal with aftermarket?	synolimit	Engine & Drivetrain	33	04-23-2018 12:50 PM
Aftermarket Oil Cooler Ruining A/C Temps?	Crxckadome	Engine & Drivetrain	11	06-02-2013 12:16 PM
Aftermarket oil cooler in CS?	fastguy9r	Track / Autocross / Drifting / Dragstrip	8	03-11-2013 08:51 PM
[WTB] WTB Aftermarket Oil Cooler ASAP	krod	Parts for sale (Private Classifieds)	4	12-17-2011 09:35 AM
Aftermarket Oil Cooler Question for SC Z's	krod	Forced Induction	9	11-08-2011 02:26 PM