Exhaust confusion

Peanuthead · 04-18-2013, 09:19 PM

I have a 2013 370z and I just purchased a hks hi power ti dual exhaust. I called Hks performance and the representative said that it would fit properly with removal of the emission canister shield. A different site that I was looking into said tha t the part wouldn't fit on my car at all. Hks USA said it is good from 2008-present years, and thmotorsports said that it wouldn't fit my 2013 z at all. Upon looking into this problem I noticed that my y pipe was 2 separate pieces, while other members on the forum with the exact exhaust had a 1 piece y pipe. Total confusion.

gSwift · 04-18-2013, 09:43 PM

Quote:

Originally Posted by Peanuthead

I have a 2013 370z and I just purchased a hks hi power ti dual exhaust. I called Hks performance and the representative said that it would fit properly with removal of the emission canister shield. A different site that I was looking into said tha t the part wouldn't fit on my car at all. Hks USA said it is good from 2008-present years, and thmotorsports said that it wouldn't fit my 2013 z at all. Upon looking into this problem I noticed that my y pipe was 2 separate pieces, while other members on the forum with the exact exhaust had a 1 piece y pipe. Total confusion.

Don't know if it helps but my Z is a 2011 and I had a full Motordyne CBE that I sold to a guy with a 2013 Z. To my knowledge he didn't have any fitment problems. I know it isn't an HKS but they are similar in design.

Peanuthead · 04-18-2013, 11:23 PM

It has been raining by me a lot lately but I'm not sure why my y pipe is two pieces with 2 different gaskets on each side when the other member I saw with it had it welded together from the factory, even though I ordered the same one, unless there was a mistake in the shipping

Peanuthead · 04-18-2013, 11:25 PM

Once the rain stopps ill try throwing it on. This is the other members exhaust compared to mine

gSwift · 04-18-2013, 11:36 PM

Quote:

Originally Posted by Peanuthead

It has been raining by me a lot lately but I'm not sure why my y pipe is two pieces with 2 different gaskets on each side when the other member I saw with it had it welded together from the factory, even though I ordered the same one, unless there was a mistake in the shipping

Is that possibly an updated version. Maybe other people with the HKS can chime in.

Alstann · 04-19-2013, 11:35 AM

That's a pic from my thread.

I know that HKS revised the Hi-Power exhaust at one point, due to midpipe clearance issues. It used to touch the crossmember ever so slightly. I'm not sure what version I have, but it fits fine.

As for the emissions canister black shield thing, I removed that altogether and have driven 18k trouble free miles.

Peanuthead · 04-19-2013, 12:06 PM

I did steal it from ur thread

I wanted to clarify before I started screwing with it in case I had to return it. I'm not sure if part of the exhaust is missing or not. It only came with one gasket but I doubt they are supposed to be connected like yours is

MCP · 04-19-2013, 12:13 PM

I have the revised HKS and it comes just like yours peanuthead.

Peanuthead · 04-19-2013, 12:26 PM

Thanks Mcp did you have any problems with the install?? And do the y pipes get connected with the one gasket that it comes with, or is there a pipe that goes between.

2013Zsport · 04-19-2013, 08:31 PM

I just got the same HKS exhaust for my 2013 peanuthead and it looks just like yours. tH motorsports assured me that it would fit the 13 model, they supposedly called there rep to verify that it would fit my car.

Peanuthead · 04-19-2013, 11:19 PM

Quote:

Originally Posted by 2013Zsport

I just got the same HKS exhaust for my 2013 peanuthead and it looks just like yours. tH motorsports assured me that it would fit the 13 model, they supposedly called there rep to verify that it would fit my car.

Did u throw it on yet? It has been pouring by me lately and I'd rather do it myself then have a shop do it. But thanks for the good news

Kabestro · 04-20-2013, 01:17 PM

I have a 13 model also, and as far as I know the 13 don't come with the shield. I'm assuming your talking about the one in the back of the car for the muffler clearance. This is what mine look like.

mike12002us · 04-20-2013, 05:06 PM

Quote:

Originally Posted by MCP

I have the revised HKS and it comes just like yours peanuthead.

When I first read this I thought you were calling him a peanuthead then I noticed that was his name

grant · 04-20-2013, 05:29 PM

I have a 2012 sport touring and it fit perfectly. I had no canister shield to deal with. Only suggestion, when you start to do the final tightening of all the bolts tighten the crossover pipe first. I went front to back and the only slight leak I had was from the H pipe. I wound up adding an additional gasket to ensure it was sealed.

04-18-2013, 09:19 PM	#1 (permalink)
Peanuthead Base Member Join Date: Feb 2013 Location: New York Posts: 9 Drives: 13nissan370z pw 6mt Rep Power: 12	Exhaust confusion I have a 2013 370z and I just purchased a hks hi power ti dual exhaust. I called Hks performance and the representative said that it would fit properly with removal of the emission canister shield. A different site that I was looking into said tha t the part wouldn't fit on my car at all. Hks USA said it is good from 2008-present years, and thmotorsports said that it wouldn't fit my 2013 z at all. Upon looking into this problem I noticed that my y pipe was 2 separate pieces, while other members on the forum with the exact exhaust had a 1 piece y pipe. Total confusion.

04-19-2013, 11:35 AM	#6 (permalink)
Alstann Track Member Join Date: Oct 2011 Location: South Florida Posts: 882 Drives: 12 PW 370z 6MT Sport Rep Power: 15	That's a pic from my thread. I know that HKS revised the Hi-Power exhaust at one point, due to midpipe clearance issues. It used to touch the crossmember ever so slightly. I'm not sure what version I have, but it fits fine. As for the emissions canister black shield thing, I removed that altogether and have driven 18k trouble free miles. __________________ 2012 Pearl White 370Z GReddy Twin Turbo

04-19-2013, 12:13 PM	#8 (permalink)
MCP Base Member Join Date: Aug 2012 Location: CA Posts: 72 Drives: 2013 FAIRLADY NISMO Rep Power: 13	I have the revised HKS and it comes just like yours peanuthead. Peanuthead likes this.

04-19-2013, 08:31 PM	#10 (permalink)
2013Zsport Base Member Join Date: Oct 2012 Location: Queensbury NY Posts: 58 Drives: 2013 370z sports pkg Rep Power: 13	I just got the same HKS exhaust for my 2013 peanuthead and it looks just like yours. tH motorsports assured me that it would fit the 13 model, they supposedly called there rep to verify that it would fit my car. Peanuthead likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HFC confusion....	Astrosfan	Intake/Exhaust	62	07-28-2011 04:00 PM
Detailing Confusion and Questions	CaptainSlow	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	16	06-13-2010 03:20 PM
exhaust confusion	nutoz	Intake/Exhaust	7	04-21-2010 12:48 AM
Confusion in what I've been seeing between Touring n regular	dudafunk	Nissan 370Z General Discussions	9	11-28-2009 12:45 PM
SRS indicator confusion...	DIGItonium	Nissan 370Z General Discussions	4	09-08-2009 01:47 PM

04-19-2013, 12:06 PM	#7 (permalink)
Peanuthead Base Member Join Date: Feb 2013 Location: New York Posts: 9 Drives: 13nissan370z pw 6mt Rep Power: 12	I did steal it from ur thread I wanted to clarify before I started screwing with it in case I had to return it. I'm not sure if part of the exhaust is missing or not. It only came with one gasket but I doubt they are supposed to be connected like yours is

04-19-2013, 12:26 PM	#9 (permalink)
Peanuthead Base Member Join Date: Feb 2013 Location: New York Posts: 9 Drives: 13nissan370z pw 6mt Rep Power: 12	Thanks Mcp did you have any problems with the install?? And do the y pipes get connected with the one gasket that it comes with, or is there a pipe that goes between.

04-20-2013, 05:29 PM	#14 (permalink)
grant Base Member Join Date: May 2012 Location: Georgia Posts: 128 Drives: AMG C43 Rep Power: 13	I have a 2012 sport touring and it fit perfectly. I had no canister shield to deal with. Only suggestion, when you start to do the final tightening of all the bolts tighten the crossover pipe first. I went front to back and the only slight leak I had was from the H pipe. I wound up adding an additional gasket to ensure it was sealed.