Not just another exhaust question, I swear!

Vichtz · 12-28-2012, 03:00 PM

Ok so I got some serious cash flow from christmas and now I'm lookin to get some HFC. I currently have a stillen CBE so naturally I was reaching for the Stillen cats. However, I found a member on here selling the ARK cats for a bit less and was wondering if they would mate up with my stock headers and Stillen CBE? I looked around for diameters on the stillen pipes which seem to range all over the place from 2 to 2.5, but couldn't find anything particularly useful. The one thread I found divulged into the typical pissing match. Also, ark lists the cats as g37 but I assume they will work for the 370z as well? I know the ARK are 2.5 so if the stock headers and the stillen pipes are 2.5 I should have no issue right? but I can not find the stillen dimensions anywhere. Will this work/fit? Anyone got any ideas? Thanks yall

370Z Purist · 12-28-2012, 03:56 PM

generally speaking, all parts should work with each other because they're designed for stock fitment. if everything fits like stock, then another part that fits like stock with fit.

it should work.

eastwest2300 · 12-28-2012, 05:06 PM

Quote:

Originally Posted by 370Z Purist

generally speaking, all parts should work with each other because they're designed for stock fitment. if everything fits like stock, then another part that fits like stock with fit.

it should work.

This is right.

Vichtz · 12-28-2012, 05:40 PM

excelent! that makes things much easier. I had a feeling this was the case, but close to half a grand is a lot of money to spend on something you don't quite understand. So it will fit the 370 as well as the 37? I will have no issues there either?

tu_clean · 12-29-2012, 02:41 AM

No issues whatsoever from g37 hfc to 370z hfc. Both are 2.5in in diameter. Get the Ark you won't regret the power gains.

roy'sz · 12-29-2012, 07:00 PM

Just to help out....the 3point flange from exhaust manifolds to cats are all the same, the slightly off center bolt pattern from the factory y pipe to cat is all the same. In conclusion....all hfc's bolting patterns are ALL THE same. Hope this helps. Oh and btw....the ark hfc's ROCK!!!

Vichtz · 01-04-2013, 02:03 PM

cool man thanks. rep.

TeamARK · 01-07-2013, 12:40 PM

all testpipes and hfc's should be made to fit its counterparts. However, there are a few with a difference in piping sizes for more aggressive flow.

12-28-2012, 03:00 PM	#1 (permalink)
Vichtz Track Member Join Date: May 2012 Location: Unknown Posts: 538 Drives: PG 09 Nissan 370z Rep Power: 14	Not just another exhaust question, I swear! Ok so I got some serious cash flow from christmas and now I'm lookin to get some HFC. I currently have a stillen CBE so naturally I was reaching for the Stillen cats. However, I found a member on here selling the ARK cats for a bit less and was wondering if they would mate up with my stock headers and Stillen CBE? I looked around for diameters on the stillen pipes which seem to range all over the place from 2 to 2.5, but couldn't find anything particularly useful. The one thread I found divulged into the typical pissing match. Also, ark lists the cats as g37 but I assume they will work for the 370z as well? I know the ARK are 2.5 so if the stock headers and the stillen pipes are 2.5 I should have no issue right? but I can not find the stillen dimensions anywhere. Will this work/fit? Anyone got any ideas? Thanks yall __________________ очень быстро ... Stillen Gen 3 CAI// Stillen CBE// B&M SS with PWJDM Shift Knob// Custom OCC// Drilled/Slotted Rotors//Halo/painted Headlights// Under-hood dress up

12-28-2012, 03:56 PM	#2 (permalink)
370Z Purist A True Z Fanatic Join Date: Jun 2009 Location: Zion, Illinois Posts: 1,873 Drives: '09 370Z-T BS M6 Rep Power: 19	generally speaking, all parts should work with each other because they're designed for stock fitment. if everything fits like stock, then another part that fits like stock with fit. it should work. OMGiGOTaZ likes this. __________________ -Phil "Since one of my brake light bulbs just went out, the forum told me that my piston rings are about to blow."

12-28-2012, 05:40 PM	#4 (permalink)
Vichtz Track Member Join Date: May 2012 Location: Unknown Posts: 538 Drives: PG 09 Nissan 370z Rep Power: 14	excelent! that makes things much easier. I had a feeling this was the case, but close to half a grand is a lot of money to spend on something you don't quite understand. So it will fit the 370 as well as the 37? I will have no issues there either? __________________ очень быстро ... Stillen Gen 3 CAI// Stillen CBE// B&M SS with PWJDM Shift Knob// Custom OCC// Drilled/Slotted Rotors//Halo/painted Headlights// Under-hood dress up

12-29-2012, 02:41 AM	#5 (permalink)
tu_clean Track Member Join Date: Dec 2008 Location: Norcal Posts: 527 Drives: 10' Nismo 370z Rep Power: 18	No issues whatsoever from g37 hfc to 370z hfc. Both are 2.5in in diameter. Get the Ark you won't regret the power gains. roy'sz likes this. __________________ SSR http://www.ssr-wheels.com/ Tanabe http://www.tanabe-usa.com/ ARK http://www.arkperformance.com/ TOYO Tires http://toyotires.com/

12-29-2012, 07:00 PM	#6 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	Just to help out....the 3point flange from exhaust manifolds to cats are all the same, the slightly off center bolt pattern from the factory y pipe to cat is all the same. In conclusion....all hfc's bolting patterns are ALL THE same. Hope this helps. Oh and btw....the ark hfc's ROCK!!! tu_clean likes this.

01-04-2013, 02:03 PM	#7 (permalink)
Vichtz Track Member Join Date: May 2012 Location: Unknown Posts: 538 Drives: PG 09 Nissan 370z Rep Power: 14	cool man thanks. rep. __________________ очень быстро ... Stillen Gen 3 CAI// Stillen CBE// B&M SS with PWJDM Shift Knob// Custom OCC// Drilled/Slotted Rotors//Halo/painted Headlights// Under-hood dress up

01-07-2013, 12:40 PM	#8 (permalink)
TeamARK Track Member Join Date: Jul 2009 Location: CHINO Posts: 957 Drives: Black 350z/370z Rep Power: 17	all testpipes and hfc's should be made to fit its counterparts. However, there are a few with a difference in piping sizes for more aggressive flow.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Exhaust question?	Shamrock	Intake/Exhaust	24	07-17-2014 11:41 PM
Swear i just gained 20 hp	sonic370	Nissan 370Z General Discussions	101	12-13-2011 06:20 AM
Exhaust Question	jpit	Intake/Exhaust	5	02-15-2010 01:38 PM
My Z is coming i swear	Plasmaball	Nissan 370Z General Discussions	9	08-06-2009 08:22 PM
Exhaust Question	Jaws12	Nissan 370Z General Discussions	5	07-12-2009 12:37 AM