Z1 air intake vs z1 maf tube/k&n filters

Mr600r · 02-04-2022, 02:56 PM

Hello all, looking for some feedback on the z1 air intake (or equivalent).
Alot of back and forth on this one. Car is runs good and strong (12.9@109)
2011 Z
ISR long tube headers
Z1 maf tubes k&n filters
Ark grip exhaust.
Admin tune.
The tune made a world of diff.
My only real complaint is the (like a lot of you) is the throttle response on this model , especially compared to my DE Z.
Not sure if pulling trigger on these would be worth it.

JARblue · 02-04-2022, 04:58 PM

Any competent tuner can modify throttle tables in the tuning software to correct the throttle response issue. Your best solution is to find a new tuner.

Go for the intakes if you want. Not sure why you haven't already with your other mods. Biggest difference you'll probably find is the metal tubes will heatsoak your engine bay increasing IATs when stopped thus further exacerbating a slow throttle response off the line.

Mr600r · 02-04-2022, 07:38 PM

Well don’t get me wrong, the throttle response is far better than stock and uprev
Tune, it is currently tuned via ECUTEK. The IAT issue makes sense with added heat. The car does seem more sluggish in higher temp.

husam2012 · 02-04-2022, 09:06 PM

I would strongly suggest researching about your current tuner to save your motor before she goes.

As for intakes, I have dyno tested the 2.5 intakes, 3 in intakes, and stock intakes with dorp in filter and Z1 maf tubes. They were all almost identical power wise (within 1%) Don't waste your money on intakes.

Mr600r · 02-04-2022, 09:34 PM

Quote:

Originally Posted by husam2012

I would strongly suggest researching about your current tuner to save your motor before she goes.

As for intakes, I have dyno tested the 2.5 intakes, 3 in intakes, and stock intakes with dorp in filter and Z1 maf tubes. They were all almost identical power wise (within 1%) Don't waste your money on intakes.

Finally a honest answer. I actually use dragy for my own test n tune. The maf tubes and k/n increased MPH alone. I love it (dragy) it’s about dead on with actual track time. Good deal I will leave it alone. Lots of hate on admin. Had my 350z de tuned by him. No issues. And I beat the snot out if it 🤷🏻*♂️.
He also made the 370 far quicker than uprev (ETune )..
but that’s another topic. I appreciate u response.

02-04-2022, 02:56 PM	#1 (permalink)
Mr600r Base Member Join Date: Nov 2021 Location: Texas Posts: 3 Drives: 11 370z base/sport Rep Power: 4	Z1 air intake vs z1 maf tube/k&n filters Hello all, looking for some feedback on the z1 air intake (or equivalent). Alot of back and forth on this one. Car is runs good and strong (12.9@109) 2011 Z ISR long tube headers Z1 maf tubes k&n filters Ark grip exhaust. Admin tune. The tune made a world of diff. My only real complaint is the (like a lot of you) is the throttle response on this model , especially compared to my DE Z. Not sure if pulling trigger on these would be worth it.

02-04-2022, 04:58 PM	#2 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Any competent tuner can modify throttle tables in the tuning software to correct the throttle response issue. Your best solution is to find a new tuner. Go for the intakes if you want. Not sure why you haven't already with your other mods. Biggest difference you'll probably find is the metal tubes will heatsoak your engine bay increasing IATs when stopped thus further exacerbating a slow throttle response off the line. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

02-04-2022, 09:06 PM	#4 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 550 Drives: 370Z Nismo Rep Power: 9469	I would strongly suggest researching about your current tuner to save your motor before she goes. As for intakes, I have dyno tested the 2.5 intakes, 3 in intakes, and stock intakes with dorp in filter and Z1 maf tubes. They were all almost identical power wise (within 1%) Don't waste your money on intakes. Streetlife, JARblue, Ronin06 and 1 others like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z1 long tube intakes VS Z1 Maf silicone tube + high flow filters	19NismoZ	Intake/Exhaust	15	07-16-2021 10:48 PM
K&N 69-7078TS Intake or Stillen 370z Generation 3 Ultra Long Tube Dual Intake	ivan_star	Intake/Exhaust	15	01-23-2020 11:02 PM
[FOR SALE] Red Z1 Post MAF Silicone Tube + PVC (Front & Side) + K&N Panel Filters all for $180	pitser73	Parts for sale (Private Classifieds)	8	06-15-2018 06:48 PM
GTM SC Intake tube	Tombonombona	Forced Induction	67	04-27-2014 04:47 PM
[FOR SALE] K&N Panel Filters, Stock inlet Tube, Cargo Cover	robw9999	Parts for sale (Private Classifieds)	7	10-13-2012 02:16 PM

02-04-2022, 07:38 PM	#3 (permalink)
Mr600r Base Member Join Date: Nov 2021 Location: Texas Posts: 3 Drives: 11 370z base/sport Rep Power: 4	Well don’t get me wrong, the throttle response is far better than stock and uprev Tune, it is currently tuned via ECUTEK. The IAT issue makes sense with added heat. The car does seem more sluggish in higher temp.