Z1 Headers advice

Czer90

I have a 2018 nismo and I recently got the Z1 short headers and I’m seeking help or advice on what to pair these up with. Straight pipes?? I also have stillen gen3 cold intake.

abm89

Test pipes will give you marginally better gains and will help the tuner with consistency. Also they'll be louder, but that's heavily dependent on the cat-back you have installed on it.

High flow cats give you slightly less gains, but you won't end up smelling like your car every time you drive it. They provide more sound to the car as well, and are still a significant improvement over the stock cats.

if you use the "the370z" ahead of any term in your favorite search engine, it will pull up relevant threads in the forum and make it easier to find stuff.

__________________
Complete Parts List:
https://github.com/abm89/ztouge-build

NissanZ34

Personally I would not pair it with test pipes because it would sound bad, raspy, canny just like a civic.

Quicksilvers

It doesn’t sound like a good idea comparing the Z1 headers with test pipes as it will be very loud and raspy unless that is what you like? I would hear the Z1 headers, test pipes, and Nismo exhaust in person on someone’s Z or a exhaust clips before considering this exhaust. If you are going to invest that much on labor and exhaust I personally would consider installing longtube headers on your Z instead if you are going this route.

__________________
Mr. Clean

God-Speed

I agree with what the others have said. Just remember "Louder is Not always Better!!"

Czer90

Wish I can trade them for long tube headers; I was giving the headers by my gf as a gift. Wonder if I can exchange them still


Sent from my iPhone using Tapatalk

NissanZ34

I would simply get high flow cats that fit these headers. It's not worth the trouble and money to trade or sell. Your car will sound good and it will have great performance.

projectpanda

what's your exhaust? there's a guy in atlanta that has z1 header with tomei test pipes and motordyne exhaust and it sounds good.

I'll be installing z1 headers on my motor also. I'm pairing them with motordyne art pipes.

__________________
RHM 75mm TB & ported up/low mani., 3" intakes/velocity stack, Z1 Headers, Motordyne ART pipes, HBP 3.5" exhaust, Tein MonoSport, SPL F/R arms, endlinks, and tie rods , Eibach sways, Z1 rotors F/R, diff bush., subframe collar, Bell Raceworks diff brace

Quicksilvers

Good luck with them making an exchange or refund in a timely manner. They are quick to sell you something but when it comes time for customer service they fall short. You are better off just keeping them and finding a nice exhaust to pair them with you like.

__________________
Mr. Clean

projectpanda

but getting long tube headers would be the same as pairing your z1 with non-resonated test pipes with regards to sound.

you are better off keeping the z1 headers and adding resonated test pipes or art pipes. if sound is your concern.

maybe message SS_Firehawk if you have more questions. He has had PPE headers and Z1 headers.

__________________
RHM 75mm TB & ported up/low mani., 3" intakes/velocity stack, Z1 Headers, Motordyne ART pipes, HBP 3.5" exhaust, Tein MonoSport, SPL F/R arms, endlinks, and tie rods , Eibach sways, Z1 rotors F/R, diff bush., subframe collar, Bell Raceworks diff brace

Gooch

If you’re worried about loudness/raspiness, I would recommend ART pipes. Paired with your stock nismo exhaust, it should be a good volume. On my 350z, I have tomei headers (similar to z1), art pipes, and nvidia gemini (also a quiet exhaust) and it is the perfect volume in my opinion. Wont wake up the neighbors but still opens up. Motordyne or tomei on the otherhand.. nah

__________________
'15 370z Nismo Tech 6MT Magnetic Black, V2 BP Kit 6467 Unexploded Turbo | '06 350z Touring 6MT Carbon Silver

Czer90

My exhaust is nismo stock and I believe you on the timely manner part lol I’ve been looking into the motordyne art test pipes


Sent from my iPhone using Tapatalk

chuckie311

im running these headers with HFC.. if you want to run test pipes get resonated ones..

__________________
Tuned by (Seb@Specialty-Z)
2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears