2017 370z looking for cold air intake

dnh408 · 11-19-2020, 04:50 PM

Just got exhaust what should I upgrade next? Cold air intake? Lower it?
Is Stillen G3 the best intake still?
Thank you!

latch · 11-19-2020, 07:10 PM

Did you do the whole exhaust or just the catback? Either way it’s really up to you with what you’d like to do next. With that said though if you start adding on a lot of bolt ons, plan on getting a tune in the near future.

dnh408 · 11-20-2020, 11:47 AM

Hey Latch! I got a good deal on the Armytrix catback exhaust system.
Not really that smart when it comes to cars but i want it to get a bit faster without costing alot.

JARblue · 11-20-2020, 12:59 PM

If you're just looking for power, get the G3s and then get a tune. Don't need to bother with much else. Returns diminish quickly.

For handling, it just depends how far down the rabbit hole you want to go. The car is perfectly capable in stock form. But a Hotchkis front sway bar is a nice upgrade. If you want to run anything other than the stock height with a stock alignment, you'll need suspension bits (SPL highly recommended). Diff bushing is also a common failure point - most people replace it with a poly mount.

11-19-2020, 04:50 PM	#1 (permalink)
dnh408 Base Member Join Date: Apr 2016 Location: San Jose Posts: 8 Drives: 370z Brilliant Silve Rep Power: 9	2017 370z looking for cold air intake Just got exhaust what should I upgrade next? Cold air intake? Lower it? Is Stillen G3 the best intake still? Thank you!

11-20-2020, 12:59 PM	#4 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	If you're just looking for power, get the G3s and then get a tune. Don't need to bother with much else. Returns diminish quickly. For handling, it just depends how far down the rabbit hole you want to go. The car is perfectly capable in stock form. But a Hotchkis front sway bar is a nice upgrade. If you want to run anything other than the stock height with a stock alignment, you'll need suspension bits (SPL highly recommended). Diff bushing is also a common failure point - most people replace it with a poly mount. God-Speed, SouthArk370Z and cv129 like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z1 Motorsports: 370Z / G37 Cold Air Intake Kit $448	John@Z1	Exhaust/Intake	31	03-14-2017 04:44 PM
Best cold air intake for 370z nismo?	manolakiNIZ	Nissan 370Z General Discussions	15	10-25-2014 09:51 PM
2010 370Z AEM Cold Air Intake,	KenAEM	Intake/Exhaust	5	07-11-2011 11:16 PM
370Z AEM cold air intake and Exhaust	KenAEM	Engine & Drivetrain	6	10-09-2009 11:51 PM

11-19-2020, 07:10 PM	#2 (permalink)
latch Base Member Join Date: Apr 2018 Location: Halifax, Canada Posts: 17 Drives: 2012 Z Sport Rep Power: 7	Did you do the whole exhaust or just the catback? Either way it’s really up to you with what you’d like to do next. With that said though if you start adding on a lot of bolt ons, plan on getting a tune in the near future.

11-20-2020, 11:47 AM	#3 (permalink)
dnh408 Base Member Join Date: Apr 2016 Location: San Jose Posts: 8 Drives: 370z Brilliant Silve Rep Power: 9	Hey Latch! I got a good deal on the Armytrix catback exhaust system. Not really that smart when it comes to cars but i want it to get a bit faster without costing alot.