Stillen Gen 3 on 2016 Nismo

JDotCDot · 06-11-2019, 10:20 AM

Hey everyone!

I'm ready to upgrade my intake, but I can't find any documentation on what modification is needed to install a Stillen Gen 3 onto a Nismo (or, at least a 2015+ one). I have a 2016 model... can anyone point me to instructions or videos on what needs to be done?

Thanks!

elhombre · 06-11-2019, 10:37 AM

Quote:

Originally Posted by JDotCDot

Hey everyone!

I'm ready to upgrade my intake, but I can't find any documentation on what modification is needed to install a Stillen Gen 3 onto a Nismo (or, at least a 2015+ one). I have a 2016 model... can anyone point me to instructions or videos on what needs to be done?

Thanks!

You will have to modify the plastic intake ducts that the factory airboxes hook up to, this is so the intake pipe can pass through. You will need a dremel or something similar to grind out the material you don't need.

There should be a procedure in the DIY section of this forum (also there is more than likely videos on youtube)

If you don't like the idea of cutting into your car then the Z1 system is the next best, they use silicon hoses that pass through that section and are flexible enough so that you don't have to modify anything. The afe takeda also have flexible piping.

Hope this helps!

JDotCDot · 06-11-2019, 10:40 AM

Quote:

Originally Posted by elhombre

You will have to modify the plastic intake ducts that the factory airboxes hook up to, this is so the intake pipe can pass through. You will need a dremel or something similar to grind out the material you don't need.

There should be a procedure in the DIY section of this forum (also there is more than likely videos on youtube)

If you don't like the idea of cutting into your car then the Z1 system is the next best, they use silicon hoses that pass through that section and are flexible enough so that you don't have to modify anything. The afe takeda also have flexible piping.

Hope this helps!

This helps a lot! Thanks so much for the quick reply!!

Rusty · 06-11-2019, 12:13 PM

On the driver's side where the tube passes through. There are 2 A/C lines. Get a piece of rubber hose about 1.5" long. Slice it and put it over the one A/C line to keep the tube from rubbing through the A/C line. You can zip tie the hose in place.

JDotCDot · 06-11-2019, 01:07 PM

Quote:

Originally Posted by Rusty

On the driver's side where the tube passes through. There are 2 A/C lines. Get a piece of rubber hose about 1.5" long. Slice it and put it over the one A/C line to keep the tube from rubbing through the A/C line. You can zip tie the hose in place.

Sweet! Thanks for the additional information about the rubber hoses. Just ordered it (and got a REALLY good deal on it new, too!). Should be delivered by June 20. Super excited!!

Rusty · 06-11-2019, 07:22 PM

Quote:

Originally Posted by JDotCDot

Sweet! Thanks for the additional information about the rubber hoses. Just ordered it (and got a REALLY good deal on it new, too!). Should be delivered by June 20. Super excited!!

Gooch · 06-16-2019, 07:59 AM

Quote:

Originally Posted by JDotCDot

Sweet! Thanks for the additional information about the rubber hoses. Just ordered it (and got a REALLY good deal on it new, too!). Should be delivered by June 20. Super excited!!

My G3’s, ordered from Z1, came with these hoses included. Also, there is a bracket on the passenger side core support that holds a wire. On my car, it’s contacting a weld right next to the filter and I had to shave the bracket down a bit. Just keep an eye out for stuff like that.

torpedo2k · 06-18-2019, 01:36 PM

Quote:

Originally Posted by JDotCDot

Hey everyone!

I'm ready to upgrade my intake, but I can't find any documentation on what modification is needed to install a Stillen Gen 3 onto a Nismo (or, at least a 2015+ one). I have a 2016 model... can anyone point me to instructions or videos on what needs to be done?

Thanks!

I did this a while back. Lots of pics. Although mine is a 2010, I believe the support cuts/mods will be the same.
Stillen Gen 3 Intake + Nismo - My Install Results

Rusty · 06-18-2019, 03:27 PM

Quote:

Originally Posted by torpedo2k

I did this a while back. Lots of pics. Although mine is a 2010, I believe the support cuts/mods will be the same.
Stillen Gen 3 Intake + Nismo - My Install Results

They are all the same.

JDotCDot · 06-24-2019, 10:52 AM

And they're in! Thanks for all the tips, everyone!

fire165 · 07-24-2019, 02:19 PM

That looks beautiful.
I just installed mine, and I’m very happy with the results.

Dahawkster · 08-13-2019, 06:01 AM

Check out the admin intakes aswell, I believe they have a similar design to the G3 but have bigger tubes even.

06-11-2019, 10:20 AM	#1 (permalink)
JDotCDot Base Member Join Date: Oct 2015 Location: USA Posts: 33 Drives: 16 Nismo / 18 STI Rep Power: 10	Stillen Gen 3 on 2016 Nismo Hey everyone! I'm ready to upgrade my intake, but I can't find any documentation on what modification is needed to install a Stillen Gen 3 onto a Nismo (or, at least a 2015+ one). I have a 2016 model... can anyone point me to instructions or videos on what needs to be done? Thanks!

06-11-2019, 12:13 PM	#4 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,218 Drives: 2011 Nismo GM 6M Rep Power: 2684438	On the driver's side where the tube passes through. There are 2 A/C lines. Get a piece of rubber hose about 1.5" long. Slice it and put it over the one A/C line to keep the tube from rubbing through the A/C line. You can zip tie the hose in place. Spartan 1771, JDotCDot and elhombre like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

06-24-2019, 10:52 AM	#10 (permalink)
JDotCDot Base Member Join Date: Oct 2015 Location: USA Posts: 33 Drives: 16 Nismo / 18 STI Rep Power: 10	Installation complete! And they're in! Thanks for all the tips, everyone! torpedo2k, Rusty, elhombre and 2 others like this.

07-24-2019, 02:19 PM	#11 (permalink)
fire165 Base Member Join Date: Jan 2014 Location: Chicago burbs. Posts: 241 Drives: 14.370Z. Auto Sport Rep Power: 13	That looks beautiful. I just installed mine, and I’m very happy with the results. JDotCDot likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] 2016 Nismo Exhaust w/ straight mufflers and nismo tips	PFC370Z	Parts for sale (Private Classifieds)	2	12-01-2017 05:51 PM
STILLEN Black Friday 2016 Specials!!!	Team_STILLEN	Sponsor Classifieds	4	11-26-2016 03:08 PM
2012-2016 Nismo STILLEN Supercharger Kits on Sale!	Team_STILLEN	Sponsor Classifieds	0	07-12-2016 03:05 PM
2016 Nismo	mrkavanagh	Member's 370Z Gallery	5	06-26-2016 10:18 AM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 10:25 PM

08-13-2019, 06:01 AM	#12 (permalink)
Dahawkster Base Member Join Date: May 2015 Location: Hawaii Posts: 71 Drives: 09 370z 6sp sprt pkg Rep Power: 10	Check out the admin intakes aswell, I believe they have a similar design to the G3 but have bigger tubes even.