Test pipes for my first bolt on!

Jayhovah

Ahh yes the "Demon Bolts"... OP search the forum for that term and you will find a lot of information about the pains of removing the factory cats.

My advice:
1) Soak the demon bolts in penetrating oil the day before (at least)
2) Remove the intakes so you can get straight on them with long extensions. You don't want to be messing around with swivels and wobbles.
3) Use 1/2" drive socket/extensions with either a large breaker bar or a powerful air powered impact wrench.
4) Use a 6 point socket. A 12 pointer will just round the thing off faster.
5) Keep bolt extractors on hand... there is a good chance you will start to round one or both of them off. My drivers side was so frozen on I had to put the bolt extractor and two of us were pulling/stabilizing a huge breaker bar and eventually the bolt just broke off to free the cat.

You can find pics of my demon bolts and the tools I used to get them out in my pic dump thread (check sig).

__________________
2013 Gun Metallic Sport - Gamma V3 Twin Turbogized
DIY Gamma V3 TT Install * Jayhovah's Gamma V3 TT Install Pic'Z and Vid'Z * DIY: Washer Reservoir for the Boosted