Found a Boost Leak

pokeyl · 08-09-2014, 11:55 AM

50K mile inspections and found this! I was loosing 3-4 PSI

Super Werty · 08-09-2014, 12:52 PM

What kit is this?

aszyd · 08-09-2014, 02:21 PM

I know it sucks to have a problem, but it's nice that the leak is so obvious against that red pipe. Hopefully it's a quick fix!

Spooler · 08-09-2014, 06:04 PM

Pull it apart, clean it up, and put some hairspray on it before you put it back together. 10-12 psi of boost is nothing to keep sealed up.

pokeyl · 08-09-2014, 10:59 PM

Quote:

Originally Posted by super werty

what kit is this?

gtm 1.5

Baer383 · 08-10-2014, 02:28 PM

You can stop the clamp from loosing by tightening the clamp then put another 10mm nut on it and tighten it up against the original one.

pokeyl · 08-10-2014, 02:58 PM

Quote:

Originally Posted by Baer383

You can stop the clamp from loosing by tightening the clamp then put another 10mm nut on it and tighten it up against the original one.

Copy

50K maintenance, add stuck bypass valve to the list (part open). I was out of the US for 60 days and my wife drove my car 3 times, not enough I guess.

08-09-2014, 11:55 AM	#1 (permalink)
pokeyl Track Member Join Date: Nov 2010 Location: DFS Posts: 900 Drives: ??? Rep Power: 55	Found a Boost Leak 50K mile inspections and found this! I was loosing 3-4 PSI __________________ It's not my fault I'm old, I was born a very long time ago!

08-09-2014, 12:52 PM	#2 (permalink)
Super Werty Track Member Join Date: Jul 2013 Location: AZ Posts: 668 Drives: '13 Sport Rep Power: 13	What kit is this? __________________ The Build

08-09-2014, 02:21 PM	#3 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 21	I know it sucks to have a problem, but it's nice that the leak is so obvious against that red pipe. Hopefully it's a quick fix! DEpointfive0 likes this. __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM

08-10-2014, 02:28 PM	#6 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	You can stop the clamp from loosing by tightening the clamp then put another 10mm nut on it and tighten it up against the original one. __________________ 2013 ZL1 754 rwhp 747 rwtq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dealer says small leak found...	zryder	Engine & Drivetrain	20	02-24-2020 10:22 PM
Boost leak on the turbo	LafitteZ	Forced Induction	15	10-02-2012 10:15 PM
I have an air leak	babbagandu	Engine & Drivetrain	5	08-08-2012 12:17 PM
Air leak	LafitteZ	Forced Induction	1	01-31-2012 09:26 PM
Oil Leak	Oscar135	Engine & Drivetrain	6	09-26-2011 10:17 AM

08-09-2014, 06:04 PM	#4 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,893 Drives: 2013 Nismo 370z Rep Power: 2684392	Pull it apart, clean it up, and put some hairspray on it before you put it back together. 10-12 psi of boost is nothing to keep sealed up.