Is the stock clutch good enough or will i need to upgrade it before installing a TT system?
|
|
LinkBack | Thread Tools | Display Modes |
02-15-2014, 06:01 PM | #2 (permalink) |
A True Z Fanatic
Join Date: Jan 2009
Location: Socal
Posts: 10,203
Drives: WOT
Rep Power: 5850 |
It really depends on how you drive. I highly recommend you upgrade it
__________________
638WHP 541WTQ @ 13.5PSI
Build thread |
02-15-2014, 06:32 PM | #3 (permalink) |
A True Z Fanatic
Join Date: Nov 2011
Location: Houston
Posts: 12,265
Drives: 2011 370ztt
Rep Power: 29539 |
You'll need a new clutch.
__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent |
02-15-2014, 08:26 PM | #6 (permalink) |
A True Z Fanatic
Join Date: Dec 2010
Location: Houston
Posts: 14,532
Drives: '10 G37 6MT
Rep Power: 2465057 |
I don't know of any deals. Plan to spend between $1,100-1,700 for clutch/flywheel/CSC/CMC/fluid. If you go with a twin disc it'll be north of $2,500.
Z1/JWT are on the lower end ($1,100-$1,200) Southbend is in the middle ($1,400ish) and Specialty Z is closer to the top ($1,700ish). |
02-15-2014, 11:34 PM | #8 (permalink) |
Track Member
Join Date: Sep 2012
Location: san jose
Posts: 550
Drives: '12 370Z FI TT BkChr
Rep Power: 38 |
Basically, why increase all the power if all you are going to do is slip the clutch?
Do it right, upgrade the clutch before or during and get that power to the ground. I run the Specialty Z and it is breaking in to be a real smooth ride. Holds power like a boss and the clutch pressure is very close to stock. It IS super light, so don't expect it to be silent, but it is quieter than a local Z's southbend black edition, so I am happy. Holds my 13psi/630hp/590 ft lb with absolutely NO issues. Cannot say enough about it. |
02-16-2014, 06:11 PM | #9 (permalink) |
Base Member
Join Date: Sep 2011
Location: Calgary AB
Posts: 61
Drives: 09 Nissan 370Z
Rep Power: 14 |
I just installed the Southbend stage 3 daily driver complete kit from Z Speed Performance. I've only had it installed for a couple days but it feels solid. In fact it almost feels like oem. I haven't dyno'd my car yet but I estimate that I'm putting down about 500WHP
Sent from my iPhone using Tapatalk |
02-26-2014, 06:16 PM | #10 (permalink) |
Track Member
Join Date: Dec 2008
Location: Safest Town In America
Posts: 987
Drives: TT-370Z and 2.5RS
Rep Power: 18 |
^ I am running the Southbend Stage 3, FW and ZSpeed CSC as well and it is awesome. I love it!
The thing is, if you have everything opened up, might as well get it done then and there. Would be quite the hassle and extra charge if you were on the dyno getting tuned and your clutch seized.
__________________
2010 - PG - M6 - 370zTT 453/409 6lbs IG @TRbal10
TEAM FLY1 MOTORSPORTS |
02-26-2014, 06:46 PM | #11 (permalink) |
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,668
Drives: 370
Rep Power: 974723 |
A great time to install a clutch is during a turbo kit installation. Having the trans out makes it far easier to install the manifolds and turbos. Depending on what kit you have, it could be required to remove the wastegate setup to get the transmission off... so its ideal to do both at once.
It is also inevitable that the stock CSC will fail, causing you to go in there even if the clutch itself didnt have a problem. |
02-27-2014, 10:39 AM | #13 (permalink) |
A True Z Fanatic
|
It would be highly recommended to upgrade your clutch...sure your stock clutch MIGHT hold but eventually it will let up.
__________________
Marti - Rev Works, Inc https://www.facebook.com/Revworks www.revworksinc.com / marti@revworksinc.com / aim: aimformarti 407-542-7863 |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
370Z Clutch Line Upgrade - Experiences? | DIGItonium | Engine & Drivetrain | 40 | 03-16-2015 02:58 PM |
so im ready to upgrade my clutch | FlacoZ | Engine & Drivetrain | 16 | 01-09-2015 01:20 PM |
Competition Clutch / Spec Clutch / Clutch Master and Flywheels from ERZperformance | ERZperformance | Drivetrain/Engine | 60 | 09-11-2013 03:08 PM |