code b2201

hindi1973

Hi guys I changed the clutch and flywheel on my friends tt370z
And it was running fine then it just died, doesn't start anymore, I had 2 codes a crank sensor code and a b2201 code, I changed the cranksensor and it went away but still doesn't start , I searched around about this code i came up with B2201 - No Communication With Traffic MasterModule or LF window stuck


All your feedback is appreciated.

Wonka2581

Hmm I have no clue.... Sub'd


I hope it all works out....

__________________
"I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

Jordo!

Do you mean "P"2201?

That's an O2 out of range code.

I can find info on a "B"2201 No Communication With Traffic MasterModule code, but all I can think of is that some connector is unplugged or a fuse is blown.

I can't find anything clear on what the "Traffic MasterModule" even is -- sounds like a nav related or maybe body control module issue, which shouldn't cause this. Seems to be a UK car thing too...

Double check that all connectors are firmly making contact and no fuses are blown?

__________________
Enjoy it. Destroy it.

hindi1973

The car is from the USA its a nismo, so nav is out of the question, all fuses and connectors checked. Still the same

hindi1973

The code is B2201

theDreamer

I can find the code in generic Nissan help guides but no reason or how to fix it.
Only thing is to run through all the plugs, check the radio system and A/C controls to make sure something is not unplugged or half plugged in.

What year is the Z?

__________________
theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN
theDreamer's Silvia // URAS // GREDDY
Houston Zs // Facebook // Twitter // Instagram

hindi1973

2012

SouthArk370Z

Traffic Master module can be the ECU on a Citroen or a navigation-related module in most other vehicles. It appears that Nissan uses the term "TrafficMaster" for part of the navigation system. Very little info on the Intertubes, so this might be a job for a dealer shop.

My guess is that, whatever the TM module is, it's interfering with the anti-theft ignition lockout.

Good luck and please let us know what you find out.

Edit: I know you say you've checked all the connectors but I recommend that you double-check all the connectors going to/from the radio/nav/HVAC units.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

MyKindaGuise

FWIW I see that code from time to time on my car but it has never caused any issues. I do not have nav either so im not sure what it means.

__________________
|445whp398tq|
|BW S259 Turbo|3" Downpipe\Exhaust|ID1000|AeroMotive|Tial|EcuTek|BC BR|S0-4|MaffFab|
MKGs-Single-Turbo

Mitco39

I would almost point to the flywheel being the culprit. That inductor ring on the back is pretty flimsy in comparison to the weight of the flywheel and it could easily bend. The car is not going to start if there is a issue with the pickup from the crank sensor, just as a safety.

It is weird that it ran for a bit but maybe during its heat cycle something shifted? To do a clutch swap you don't touch any harness's other than the trans harness and unplug the O2s, both of which you could theoretically leave unplugged and the car would still start just fine.

Found this after a quick search on the internet, might be useful to see if a code is popping up on there.

2007-2010 G35 and G37 Sedan, and 2008+ G37 coupe diagnostics and settings display system

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html

hindi1973

I guess its time to open up and see the flywheel and clutch, and maybe choose a stock flywheel instead of a light weight flywheel and take it from there. Keep u guys posted, cant thank you enough guys ..


P.s the car is a nismo so it doesn't have navigation 😌

hindi1973

Opened the trans , The clutch and flywheel are messedup although they are brand new , A pin broke from the clutch and messed up everything inside cant blame the kit or the install because i can never know, Well now we know when this code pops up then something is wrong internally.

Thanks for your support.

Mitco39

Glad you found your issue

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html