3" Charge Pipes Contacting Tower Brace

pokeyl · 11-05-2013, 05:58 PM

GMT 3" charge pipes only. My SC Stage 1 did not contact the brace. If you have a TT or SC 1.5 you may want to check.

SPOHN · 11-05-2013, 08:36 PM

You could try readjusting some of the piping in several location on that side. But this is the small things that go with modding. Or if that doesn't work out a small sticky cushion on top of the piping to keep it from rubbing.

Super Werty · 11-05-2013, 08:51 PM

get a 3" silicone coupling...cut it vertically and slide it over the pipe. Should grip the pipe pretty good and not move...plus it will withstand the heat

Chuck33079 · 11-05-2013, 09:01 PM

Were the spacers for the brace installed?

SPOHN · 11-05-2013, 09:11 PM

Quote:

Originally Posted by Chuck33079

Were the spacers for the brace installed?

It that's the case, good question.

pokeyl · 11-05-2013, 11:11 PM

Quote:

Originally Posted by Chuck33079

Were the spacers for the brace installed?

NO spacers, and I am the only one that works on the car. If there are spacers mine never had them.

Chuck33079 · 11-05-2013, 11:23 PM

Quote:

Originally Posted by pokeyl

NO spacers, and I am the only one that works on the car. If there are spacers mine never had them.

That's odd. My GTM kit had spacers to raise the brace about 3/16" or so to avoid that problem.

pokeyl · 11-05-2013, 11:28 PM

So the spacers should come with the kit? Listed in the instructions?

I had a 1.0 SC kit and no problems, after the 1.5 change to 3" pipes caused the trouble

Chuck33079 · 11-05-2013, 11:33 PM

Quote:

Originally Posted by pokeyl

So the spacers should come with the kit? Listed in the instructions?

I had a 1.0 SC kit and no problems, after the 1.5 change to 3" pipes caused the trouble

It's been so long since I looked at the TT instructions I couldn't tell you. Im sure mine came with my kit. They're nothing special. You could snag some washers from Home Depot and be back on the road in fifteen minutes.

pokeyl · 11-05-2013, 11:35 PM

Quote:

Originally Posted by Chuck33079

It's been so long since I looked at the TT instructions I couldn't tell you. Im sure mine came with my kit. They're nothing special. You could snag some washers from Home Depot and be back on the road in fifteen minutes.

copy

11-05-2013, 05:58 PM	#1 (permalink)
pokeyl Track Member Join Date: Nov 2010 Location: DFS Posts: 900 Drives: ??? Rep Power: 55	3" Charge Pipes Contacting Tower Brace GMT 3" charge pipes only. My SC Stage 1 did not contact the brace. If you have a TT or SC 1.5 you may want to check. __________________ It's not my fault I'm old, I was born a very long time ago! Last edited by pokeyl; 11-05-2013 at 06:03 PM.

11-05-2013, 08:36 PM	#2 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	You could try readjusting some of the piping in several location on that side. But this is the small things that go with modding. Or if that doesn't work out a small sticky cushion on top of the piping to keep it from rubbing. __________________

11-05-2013, 08:51 PM	#3 (permalink)
Super Werty Track Member Join Date: Jul 2013 Location: AZ Posts: 668 Drives: '13 Sport Rep Power: 13	get a 3" silicone coupling...cut it vertically and slide it over the pipe. Should grip the pipe pretty good and not move...plus it will withstand the heat __________________ The Build

11-05-2013, 09:01 PM	#4 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Were the spacers for the brace installed? SPOHN likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

11-05-2013, 11:28 PM	#8 (permalink)
pokeyl Track Member Join Date: Nov 2010 Location: DFS Posts: 900 Drives: ??? Rep Power: 55	So the spacers should come with the kit? Listed in the instructions? I had a 1.0 SC kit and no problems, after the 1.5 change to 3" pipes caused the trouble __________________ It's not my fault I'm old, I was born a very long time ago! Last edited by pokeyl; 11-05-2013 at 11:31 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Front Strut Tower Brace OEM	modme	Parts for sale (Private Classifieds)	8	08-03-2014 01:21 AM
strut tower brace material?	edub370	Exterior & Interior	12	09-22-2012 02:01 AM
WTB: OEM Strut tower brace	daisuke149	Wanted	7	10-27-2010 09:50 AM
WTB: OEM Nismo Strut Tower Brace	'10Anamoly	Wanted	0	07-13-2010 09:30 AM
Zele: Strut Tower Brace for the 370Z Z34 01.01.09	AK370Z	Nissan 370Z General Discussions	27	01-19-2009 09:32 AM