HELP: Stillen Parts no.

mento · 08-13-2013, 02:49 PM

Anybody knows parts no.of idler pulley ???
(Stillen sc idler pulley in the red circle)

Bearing was damaged..

Cmike2780 · 08-13-2013, 02:59 PM

Why not contact Stillen directly?

Osiris · 08-13-2013, 03:10 PM

yea, my stillen idler pulley failed also. Sub par parts. I replaced mine with a pulley of same size from local auto parts store....works like a charm.

mento · 08-13-2013, 03:16 PM

It is already requested to Stillen..

Their Idler pulley too weak.........

I buied same size from local auto parts store, but boost came down............ 0.05bar

1slow370 · 08-13-2013, 06:24 PM

Well if you pull the snap ring, push the bearing, out and post the numbers on it i could look up an upgraded bearing for you.

mento · 08-13-2013, 08:36 PM

Bearing so good. But the housing was cracked....

Quote:

Originally Posted by 1slow370

Well if you pull the snap ring, push the bearing, out and post the numbers on it i could look up an upgraded bearing for you.

1slow370 · 08-14-2013, 12:13 PM

ah well that sucks just bad engineering then is that idler a small jack shft because normally changing the size of the idler shouldn't effect boost pressure unless your belt tension is to low and the belt is slipping now.

1slow370 · 08-14-2013, 07:21 PM

Oh but make sure not to get the belt too tight or else the front bearing on the vortech will fail early.

mento · 08-15-2013, 11:33 PM

Thanks a lot.

Quote:

Originally Posted by 1slow370

Oh but make sure not to get the belt too tight or else the front bearing on the vortech will fail early.

08-13-2013, 02:59 PM	#2 (permalink)
Cmike2780 A True Z Fanatic Join Date: Jun 2010 Location: Long Island Posts: 5,059 Drives: slowwww Rep Power: 29	Why not contact Stillen directly? elperuano likes this. __________________ [09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R] [ArchitTEK Photography]

08-13-2013, 03:10 PM	#3 (permalink)
Osiris A True Z Fanatic Join Date: Mar 2009 Location: http://www.cfzclub.com/ Posts: 1,524 Drives: Angry Rep Power: 19	yea, my stillen idler pulley failed also. Sub par parts. I replaced mine with a pulley of same size from local auto parts store....works like a charm. __________________ ^^^^^^^^^Like our Facebook!^^^^^^^^^

08-13-2013, 03:16 PM	#4 (permalink)
mento Base Member Join Date: Feb 2013 Location: South Korea Posts: 11 Drives: 370z Supercharger Rep Power: 12	It is already requested to Stillen.. Their Idler pulley too weak......... I buied same size from local auto parts store, but boost came down............ 0.05bar Last edited by mento; 08-13-2013 at 08:32 PM.

08-13-2013, 06:24 PM	#5 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	Well if you pull the snap ring, push the bearing, out and post the numbers on it i could look up an upgraded bearing for you. elperuano likes this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

08-14-2013, 12:13 PM	#7 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	ah well that sucks just bad engineering then is that idler a small jack shft because normally changing the size of the idler shouldn't effect boost pressure unless your belt tension is to low and the belt is slipping now. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

08-14-2013, 07:21 PM	#8 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	Oh but make sure not to get the belt too tight or else the front bearing on the vortech will fail early. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Z part out includes FI LTH's, CBE, Stillen & cosmetic parts..details inside	Danny3.7	Parts for sale (Private Classifieds)	32	07-11-2011 08:26 AM
Josh@Stillen Suspension Parts Help	CBRich	STILLEN	1	11-17-2010 11:59 AM
Stillen Aero Parts	deolee	Exterior & Interior	4	06-29-2010 06:55 PM
Stillen Parts for sale.	soaka1	Parts for sale (Private Classifieds)	18	05-01-2010 02:26 PM
Stillen Parts Group Buy - Happy times for all!	evse82	Australia/New Zealand	85	09-27-2009 08:11 PM