370z A2A supercharger boost issue. At dyno run

vqholic@Korea · 10-17-2022, 07:30 AM

Hello, a2a mode in Korea. I abandoned the Uprev and came to Ecutek. When running dyno , WOT, the boost is sometimes 14.5 psi, but sometimes 13.5 psi. What's the problem? My setting is 9lb pulley+turbo guard. And Ecutek Hybrid with omni 4bar Map Sensor.

What the hell's wrong with you? Bov problem? Belt slip? As shown in the video, the boost leak at 6400 rpm. At this time, the boost is 13.5 psi. however,When the boost rises to 7300 rpm, it is 14.5 psi.

Averying · 10-17-2022, 09:19 AM

Quote:

Originally Posted by vqholic@Korea

Hello, a2a mode in Korea. I abandoned the Uprev and came to Ecutek. When running dyno , WOT, the boost is sometimes 14.5 psi, but sometimes 13.5 psi. What's the problem? My setting is 9lb pulley+turbo guard. And Ecutek Hybrid with omni 4bar Map Sensor.

What the hell's wrong with you? Bov problem? Belt slip? As shown in the video, the boost leak at 6400 rpm. At this time, the boost is 13.5 psi. however,When the boost rises to 7300 rpm, it is 14.5 psi.

I’m not too sure what the exact question is here, but it makes sense for you to see an increase in boost from 6400 to 7300 rpm. It won’t be consistent throughout the rev range.

As to how you’re making 14.5 psi with a 9 psi pulley, I’m not sure…

Sent from my iPhone using Tapatalk

vqholic@Korea · 10-17-2022, 10:07 AM

Quote:

Originally Posted by Averying

I’m not too sure what the exact question is here, but it makes sense for you to see an increase in boost from 6400 to 7300 rpm. It won’t be consistent throughout the rev range.

As to how you’re making 14.5 psi with a 9 psi pulley, I’m not sure…

Sent from my iPhone using Tapatalk

I'm pulling the throttle and I can hear the boost leaking. I don't know why.

The bov opens at 6000 rpm while pulling the throttle. Is it because I mounted the hose 1/4 inch in diameter?

vqholic@Korea · 10-17-2022, 10:56 AM

unit : bar

Averying · 10-17-2022, 08:40 PM

Quote:

Originally Posted by vqholic@Korea

unit : bar

The blue curve looks pretty perfect for a boost curve. Doesn’t look like the BOV is opening?

What did you change between red and blue curves?

Sent from my iPhone using Tapatalk

vqholic@Korea · 10-17-2022, 08:50 PM

Quote:

Originally Posted by Averying

The blue curve looks pretty perfect for a boost curve. Doesn’t look like the BOV is opening?

What did you change between red and blue curves?

Sent from my iPhone using Tapatalk

Nothing else has been done, the blow-off valve will open between 6000 and 6400 rpm while the throttle is being pulled and will show a red curve.

Averying · 10-17-2022, 09:44 PM

Quote:

Originally Posted by vqholic@Korea

Nothing else has been done, the blow-off valve will open between 6000 and 6400 rpm while the throttle is being pulled and will show a red curve.

I’d take apart your BOV and make sure it is operating properly. Oil it up if necessary. What BOV do u have?

Confirm that your hoses are routed correctly without any leaks.

Sent from my iPhone using Tapatalk

TopgunZ · 10-18-2022, 09:40 AM

Looks like belt slip to me. Simple way to test this is just hit it with some belt conditioner which is a short term band aid fix but it will grip enough for a day to determine if its belt related or not. And will cost $3 and 5 minutes.

vqholic@Korea · 10-18-2022, 01:12 PM

Quote:

Originally Posted by TopgunZ

Looks like belt slip to me. Simple way to test this is just hit it with some belt conditioner which is a short term band aid fix but it will grip enough for a day to determine if its belt related or not. And will cost $3 and 5 minutes.

Okay. Last year, I got Top Gunz Anti-Slip Pulley, and I'll try it this time

redondoaveb · 10-19-2022, 12:02 AM

Quote:

Originally Posted by vqholic@Korea

Okay. Last year, I got Top Gunz Anti-Slip Pulley, and I'll try it this time

The anti slip pulley you have is for the serpentine side. The belt slip could be on the supercharger side. I never had belt slip issues on the serpentine side, only the supercharger side. Look closely at the bracket around the pulley areas, you'll see belt dust if you're getting belt slip

10-17-2022, 07:30 AM	#1 (permalink)
vqholic@Korea Base Member Join Date: Nov 2019 Location: Republic of Korea Posts: 37 Drives: 10 Nissan 370z SC MT Rep Power: 55	370z A2A supercharger boost issue. At dyno run Hello, a2a mode in Korea. I abandoned the Uprev and came to Ecutek. When running dyno , WOT, the boost is sometimes 14.5 psi, but sometimes 13.5 psi. What's the problem? My setting is 9lb pulley+turbo guard. And Ecutek Hybrid with omni 4bar Map Sensor. What the hell's wrong with you? Bov problem? Belt slip? As shown in the video, the boost leak at 6400 rpm. At this time, the boost is 13.5 psi. however,When the boost rises to 7300 rpm, it is 14.5 psi. Last edited by vqholic@Korea; 10-17-2022 at 07:34 AM.

10-18-2022, 09:40 AM	#8 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Looks like belt slip to me. Simple way to test this is just hit it with some belt conditioner which is a short term band aid fix but it will grip enough for a day to determine if its belt related or not. And will cost $3 and 5 minutes. Optimiser, Averying and vqholic@Korea like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z soho-a2a-supercharger kit TIAL QR blow-off valve sound issue.	vqholic@Korea	Forced Induction	10	04-25-2022 10:40 AM
370z Supercharger Boost Issues	pkxu123	Forced Induction	48	03-11-2022 08:24 PM
Max boost on a supercharger	Jinxx	Forced Induction	22	03-15-2016 07:50 AM
More boost Stillen SuperCharger kit	teknoprep	Engine & Drivetrain	29	05-21-2015 02:20 AM
370z GTM Stage 2 Supercharger Dyno (Dynopack @Hawaii)	definitionxmk	Forced Induction	14	09-27-2011 05:16 PM