|
Hi guys, I know some people have gone this route of replacing the stock pulley on the back of the stillen supercharger to the smaller 10psi (2.75") pulley. But the
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
09-18-2015, 01:22 PM
|
#1 (permalink) |
|
Base Member
Join Date: Dec 2014
Location: Toronto, Canada
Posts: 35
Drives: 17 Audi SQ5
Rep Power: 11  |
stillen 10psi pulley belt issue??
Hi guys, I know some people have gone this route of replacing the stock pulley on the back of the stillen supercharger to the smaller 10psi (2.75") pulley. But the problem is there is not enough length in the tensioner system to tension for the smaller pulley, simple right get a smaller belt? Here in lies the problem I have been looking high and low for a smaller belt. stillen uses gates belt K080220 belt is 22 5/8" long and i need roughly a 22" belt now. I tried to contact some members who might have a answer but no luck. Ive contacted gates about getting a custom belt make and haven't had much luck. only other option i see is making a custom bracket with a longer slot for tension. anyone know of a smaller belt for this application???
__________________
Stillen SC@10psi,Frozen boost,Russel An-lines,Stillen Oil Cooler,Stillen HFC,Stillen CBE,CJ motorsports fuel adapter & PG,Bosch 750 cc,Aero340lph,Stage 1 clutch and flywheel,Custom Tune,H&R 20mm spacers, stock Rays,Fugimura,amuse,Tommy Kaira,497whp/361ftlbs 
|
|
|
|
09-18-2015, 04:57 PM
|
#2 (permalink) |
|
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834  |
Your going about it wrong. Get a larger idler pulley.
Or a larger Jack shaft pulley instead of smaller sc pulley. Better traction that way. I've never understood why guys go smaller instead of bigger.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 09-18-2015 at 04:59 PM. |
|
|
|
|
09-18-2015, 06:52 PM
|
#3 (permalink) | |
|
Track Member
Join Date: Jul 2011
Location: Edmonton, Canada
Posts: 681
Drives: BOOSTED3-7-0
Rep Power: 15 |
Quote:
Call me when u have a sec tops, i figured out the map sensor issue.
__________________
|
|
|
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [FOR SALE] Stillen Underdrive Pulley & Belt | Stailey | Parts for sale (Private Classifieds) | 4 | 11-26-2014 07:57 PM |
| [FOR SALE] Stillen pulley and new belt | Huck | Parts for sale (Private Classifieds) | 14 | 08-13-2014 10:37 AM |
| [FOR SALE] Stillen UD Pulley & Belt - 160 shipped | SgtGoldy | Parts for sale (Private Classifieds) | 8 | 09-14-2013 12:26 AM |
| [FOR SALE] New Stillen Underdrive Pulley and Belt | logenl7 | Parts for sale (Private Classifieds) | 9 | 01-04-2013 08:03 PM |
| [FOR SALE] Stillen Underdrive pulley with belt. | kellyefields | Parts for sale (Private Classifieds) | 3 | 11-15-2011 03:14 PM |
2Likes
2007 350Z NISMO #0618: Zerolift | UPREV | F.I. | Greddy | Competition Clutch | Injector Dynamics | Aeromotive | Pioneer | JL
Linear Mode
