Removing door sheet metal?

Jsmith7861 · 09-12-2014, 03:42 PM

Hey guys, some *** hat swung their door open and put a dent in the driver side door. Anyone got an idea of how to get to it? Is it in any shape or form a DIY to remove that panel? It's such a slight dent I can't even get a good pic of it.

DEpointfive0 · 09-12-2014, 03:51 PM

Take it to a PDR place?

Jsmith7861 · 09-12-2014, 03:55 PM

I'm a cheap SOB

DEpointfive0 · 09-12-2014, 04:03 PM

Quote:

Originally Posted by Jsmith7861

I'm a cheap SOB

Fuckin hell you must be, lol. If you can't even see it I bet it will be $20-40.

If that's really too much, good luck

Jsmith7861 · 09-12-2014, 04:07 PM

Quote:

Originally Posted by DEpointfive0

Fuckin hell you must be, lol. If you can't even see it I bet it will be $20-40.

If that's really too much, good luck

Lmao, that's better than what I expected, I expected around 100. I mean, you can see it, but it's so shallow of a dent you can't even get a good pic of it.

DEpointfive0 · 09-12-2014, 04:10 PM

Quote:

Originally Posted by Jsmith7861

Lmao, that's better than what I expected, I expected around 100. I mean, you can see it, but it's so shallow of a dent you can't even get a good pic of it.

PDR prices have always been pretty fair unless you own a DeLorean, in which it's better to buy a fluxing flux capacitor go 88 down the freeway, and back in time to prevent your stupid former self from being your broker future self

aszyd · 09-12-2014, 09:36 PM

Quote:

Originally Posted by DEpointfive0

PDR prices have always been pretty fair unless you own a DeLorean, in which it's better to buy a fluxing flux capacitor go 88 down the freeway, and back in time to prevent your stupid former self from being your broker future self

I watched a DeLorean resto video once. There is this crazy polishing attachment needed to get the proper finish on the panels. I'm sure it comes at a price premium.

Gadgetech · 09-14-2014, 12:28 AM

PDR can remove from the outside. Probably take 10 minutes.

Sent from my Lumia 1020 using Tapatalk

09-12-2014, 03:42 PM	#1 (permalink)
Jsmith7861 Enthusiast Member Join Date: Nov 2013 Location: Virginia Posts: 466 Drives: 2014 370z Base Sport Rep Power: 12	Removing door sheet metal? Hey guys, some *** hat swung their door open and put a dent in the driver side door. Anyone got an idea of how to get to it? Is it in any shape or form a DIY to remove that panel? It's such a slight dent I can't even get a good pic of it.

09-12-2014, 03:51 PM	#2 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Take it to a PDR place? __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

09-14-2014, 12:28 AM	#8 (permalink)
Gadgetech A True Z Fanatic Join Date: Oct 2013 Location: Cumming, Ga Posts: 1,559 Drives: The Short Bus Rep Power: 870	PDR can remove from the outside. Probably take 10 minutes. Sent from my Lumia 1020 using Tapatalk __________________ Upstate Z Club

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Removing deep scratches in polished metal?	Eagle	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	5	03-27-2013 12:30 PM
Removing metal plate inside door	JAYNO20	Exterior & Interior	3	06-26-2012 10:23 PM
How to access sheet metal "behind" door glass.	Pat C.	DIY Section (Do-It-Yourself)	0	01-01-2012 03:00 PM
Guys DYNO Sheet	aalqaedi	Engine & Drivetrain	24	06-09-2011 10:09 AM
JDM One Sheet Ads	MC	Nissan 370Z Photos / Spyshots / Video / Media Gallery	10	12-05-2008 07:04 AM

09-12-2014, 03:55 PM	#3 (permalink)
Jsmith7861 Enthusiast Member Join Date: Nov 2013 Location: Virginia Posts: 466 Drives: 2014 370z Base Sport Rep Power: 12	I'm a cheap SOB