Plasti Dipped Wheels, Door Handles, and Badges Thought?

Thuegel1 · 08-04-2014, 10:59 AM

Well, I decided to go ahead and plasti dip nearly everything that I could on the Z this weekend and wanted to get some thoughts on how it turned out. I used the matte black and then put two coats of glosifier on, which I think looks great. I think that the headlights and taillight now kinda stick out. Thinking that I need to paint the headlights. Not real sure what to do with the taillight though. Also cleaned and put a couple coats of liquid glass on since I did not really have the time to Zaino.

Limeybastard · 08-04-2014, 11:29 AM

I await to see you black blob shortly after you black out all the lights soon, cant wait.

kenchan · 08-04-2014, 11:34 AM

Quote:

Originally Posted by Thuegel1

Well, I decided to go ahead and plasti dip nearly everything that I could on the Z this weekend and wanted to get some thoughts on how it turned out. I used the matte black and then put two coats of glosifier on, which I think looks great. I think that the headlights and taillight now kinda stick out. Thinking that I need to paint the headlights. Not real sure what to do with the taillight though. Also cleaned and put a couple coats of liquid glass on since I did not really have the time to Zaino.

you guys already know...

aszyd · 08-04-2014, 01:31 PM

Yay! Loss of visibility!

There are tutorials here on how to open your headlight lights and paint the housings black. That will probably achieve the look you are going for and not affect their brightness.

Plasti-dip can be a fun project, but there are better ways to achieve the look and maintain a level of quality not offered by the dip.

Thuegel1 · 08-04-2014, 02:46 PM

Thanks for the more helpful information. The dip is a temporary solution until I can replace the rims. As far as the handles I wanted to get them painted the body color, but cant go without handles for that to happen at this time. I prob should have mentioned that this was not a permanent solution to avoid some of the more negative comments. As far as the headlights I was wondering what is preferred the oven or heat gun? I have seen both mentioned on here, but seems like the heat gun might run into more issues?

kenchan · 08-04-2014, 02:51 PM

haha, backpedaling i see.

you sure about that?

really really sure?

uhhhhh...

<= op

haha, just messing with ya.

kenchan · 08-04-2014, 02:53 PM

i would use oven convection type.... but i know my wife would not like that.

aszyd · 08-04-2014, 02:56 PM

I'm going to do the oven method, when I get the

to throw my lights in there. Heat gun just won't provide enough even heat, unless you do the box method, which I also feel is questionable.

Limeybastard · 08-04-2014, 10:03 PM

Quote:

Originally Posted by aszyd

I'm going to do the oven method, when I get the

to throw my lights in there. Heat gun just won't provide enough even heat, unless you do the box method, which I also feel is questionable.

I am gonna attempt the oven method on someone elses headlights first LOL

08-04-2014, 10:59 AM	#1 (permalink)
Thuegel1 Base Member Join Date: May 2013 Location: Earth Posts: 36 Drives: 2013 370x Rep Power: 12	Plasti Dipped Wheels, Door Handles, and Badges Thought? Well, I decided to go ahead and plasti dip nearly everything that I could on the Z this weekend and wanted to get some thoughts on how it turned out. I used the matte black and then put two coats of glosifier on, which I think looks great. I think that the headlights and taillight now kinda stick out. Thinking that I need to paint the headlights. Not real sure what to do with the taillight though. Also cleaned and put a couple coats of liquid glass on since I did not really have the time to Zaino. Last edited by Thuegel1; 08-04-2014 at 12:10 PM.

08-04-2014, 01:31 PM	#4 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 21	Yay! Loss of visibility! There are tutorials here on how to open your headlight lights and paint the housings black. That will probably achieve the look you are going for and not affect their brightness. Plasti-dip can be a fun project, but there are better ways to achieve the look and maintain a level of quality not offered by the dip. __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM

08-04-2014, 02:56 PM	#8 (permalink)
aszyd Track Member Join Date: May 2014 Location: Florida Posts: 877 Drives: Magma Red 370z T+S Rep Power: 21	I'm going to do the oven method, when I get the to throw my lights in there. Heat gun just won't provide enough even heat, unless you do the box method, which I also feel is questionable. __________________ Competition Clutch\|Fast Intentions\|Maxbore\|NST\|Setrab\|Stillen\|Tomei\|Uprev\| Z1 Avant Garde\|SPC\|Stance\|Whiteline Aerojacket\|Seibon\|Tanabe\|TRS\|TWM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dark Grey Plasti Dipped Wheels	andrewhilo	Nissan 370Z Photos / Spyshots / Video / Media Gallery	6	04-22-2014 09:38 PM
Plasti-dipped wheels?	Aquosman	Exterior & Interior	10	04-06-2014 08:06 PM
Plasti-dipped OEM 18 wheels	jaedub	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	04-13-2013 05:11 AM
Just Plasti Dipped My Wheels on my Pearl 370z	scoot87	Nissan 370Z Photos / Spyshots / Video / Media Gallery	21	03-29-2013 08:25 PM
Plasti dipped the wheels tonight...	864Zbeast	Wheels & Tires	17	03-07-2012 06:16 PM

08-04-2014, 11:29 AM	#2 (permalink)
Limeybastard A True Z Fanatic Join Date: Apr 2014 Location: FL and London UK. Posts: 1,514 Drives: 2014 370Z Sport. Rep Power: 17	I await to see you black blob shortly after you black out all the lights soon, cant wait.

08-04-2014, 02:46 PM	#5 (permalink)
Thuegel1 Base Member Join Date: May 2013 Location: Earth Posts: 36 Drives: 2013 370x Rep Power: 12	Thanks for the more helpful information. The dip is a temporary solution until I can replace the rims. As far as the handles I wanted to get them painted the body color, but cant go without handles for that to happen at this time. I prob should have mentioned that this was not a permanent solution to avoid some of the more negative comments. As far as the headlights I was wondering what is preferred the oven or heat gun? I have seen both mentioned on here, but seems like the heat gun might run into more issues?

08-04-2014, 02:51 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	haha, backpedaling i see. you sure about that? really really sure? uhhhhh... <= op haha, just messing with ya.

08-04-2014, 02:53 PM	#7 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i would use oven convection type.... but i know my wife would not like that.