Perfecting the fit of a bumper

Kayzee · 06-13-2014, 12:44 AM

So my shine auto amuse bumpers just came in, and to be quite frank they are pretty spot on in terms of fitment. There are minor (1-3mm) differences here and there which it looks like a little bit of pulling the bumper to one or the other side fixes.

What is the typical procedure body shops take to make something fit flawlessly? This is FRP material. Do i take a heatgun to it and just pull/bend little by little here and there when i need it to fit?

Any advice is much appreciated

paperboy42190 · 06-13-2014, 12:57 AM

I really dont think you can stretch that material with a heat gun. You'd most likely damage it before it stretches.
I've installed the Shineauto amuse bumper before and you're right it fits surprisingly well. However if you want to get it even more perfect then I suppose you'd have to add bondo on the edges to give it that extra couple mm.

Amj2020 · 06-13-2014, 10:37 AM

Hey Kayzee I would love to see some finished photos of the fitment as I am considering the same setup in the rear. I was contemplating shine vs aerojacket...still undecided, but hear good things about the fitment of shine.
Ive heard letting a body shop fit it to get it right is the only way to go on these rep kits.

wheee! · 06-13-2014, 10:42 AM

There is really no point in buying any frp parts and not having them professionally fitted. There will always be some work that needs to be done in terms of 'massaging' to get the perfect fit. Plan this in your purchase and there will be no surprises.... don't plan for body work and you will be disappointed in the sloppy results....

( Click to show/hide )

onzedge · 06-13-2014, 12:14 PM

Quote:

Originally Posted by wheee!

There is really no point in buying any frp parts and not having them professionally fitted. There will always be some work that needs to be done in terms of 'massaging' to get the perfect fit. Plan this in your purchase and there will be no surprises.... don't plan for body work and be disappointed in the sloppy results....

( Click to show/hide )

06-13-2014, 12:44 AM	#1 (permalink)
Kayzee Enthusiast Member Join Date: Jul 2012 Location: New York, NYC Posts: 361 Drives: around Rep Power: 13	Perfecting the fit of a bumper So my shine auto amuse bumpers just came in, and to be quite frank they are pretty spot on in terms of fitment. There are minor (1-3mm) differences here and there which it looks like a little bit of pulling the bumper to one or the other side fixes. What is the typical procedure body shops take to make something fit flawlessly? This is FRP material. Do i take a heatgun to it and just pull/bend little by little here and there when i need it to fit? Any advice is much appreciated __________________ 2010 Sport, Magnetic Black Top Speed Pro 1 CBE - Swift Spec R - Stillen Splitter - 35% Tint - Tinted tails - 6k HID -ES113 20x10 20x11

06-13-2014, 12:57 AM	#2 (permalink)
paperboy42190 Base Member Join Date: Sep 2011 Location: Alhambra, CA Posts: 193 Drives: 2007 Acura TL Type-S Rep Power: 14	I really dont think you can stretch that material with a heat gun. You'd most likely damage it before it stretches. I've installed the Shineauto amuse bumper before and you're right it fits surprisingly well. However if you want to get it even more perfect then I suppose you'd have to add bondo on the edges to give it that extra couple mm. FairladyZ10PG and Wolfenstein like this.

06-13-2014, 10:37 AM	#3 (permalink)
Amj2020 Enthusiast Member Join Date: Mar 2012 Location: NY/LI Posts: 393 Drives: MB Z,Jeep,BMW Rep Power: 13	Hey Kayzee I would love to see some finished photos of the fitment as I am considering the same setup in the rear. I was contemplating shine vs aerojacket...still undecided, but hear good things about the fitment of shine. Ive heard letting a body shop fit it to get it right is the only way to go on these rep kits. __________________ 2012 Magnetic Black 370z \| Fast Intentions CBE \| Stillen G3 \| Motordyne ART \| H&R Coilovers \| Work Emotion \| Fujimura \| Uprev \| Amuse\| GT-R Start

06-13-2014, 10:42 AM	#4 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 58 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40182	There is really no point in buying any frp parts and not having them professionally fitted. There will always be some work that needs to be done in terms of 'massaging' to get the perfect fit. Plan this in your purchase and there will be no surprises.... don't plan for body work and you will be disappointed in the sloppy results.... ( Click to show/hide ) kenchan, KaienZ34, onzedge and 1 others like this. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal Last edited by wheee!; 06-13-2014 at 12:56 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] WTB: OEM side skirts, rear bumper, front bumper	mag_black	Parts for sale (Private Classifieds)	12	04-18-2014 01:10 PM
Pic Request: Fujimura front bumper w/ Amuse rear bumper	Wonka2581	Exterior & Interior	10	04-26-2013 07:43 AM
[FOR SALE] SOCAL: OEM PW Front Bumper/Rear Bumper/Side Skirts/Fenders	Fly1 Motorsports	Parts for sale (Private Classifieds)	11	02-03-2012 07:17 PM
MB Front bumper, rear bumper and Side skirts	Jamaica	Parts for sale (Private Classifieds)	9	12-22-2010 01:46 PM
FS:Stock Parts Black~Hood,Sideskirts,Front Bumper,Rear Bumper,Nismo Spoiler,Intakes	Tango	Parts for sale (Private Classifieds)	19	10-04-2010 09:25 PM