Remove door sill trim and footwell panel

GalletGun · 12-12-2013, 02:36 PM

The plastic material in the 370z seems so fragile.

I tried to look everywhere for this but how do you properly remove the door sill trim at the bottom and the panel by the foot well. I will be running speaker wires through their. They seem to be gripping on really tight so I am afraid to break them if I pull the wrong way.

Thanks much!

kenchan · 12-12-2013, 02:41 PM

for speaker wires you can probably just pull up the door seal (rubber) and drop the wires in there.

GalletGun · 12-12-2013, 03:43 PM

true but to get to the foot well panel to run wire though the grommet/harness thru the door i believe u have to remove the door sill panel first.

SouthArk370Z · 12-12-2013, 04:24 PM

Factory Service Manual (FSM) is the place to start for disassembling procedures. Link in my sig.

Edit: a trim panel pry tool comes in handy.

kenchan · 12-12-2013, 04:25 PM

^^ very convenient!

GalletGun · 12-12-2013, 07:17 PM

okay il check out the FSM. i didnt know it went into details of taking ur car apart. lol

DEpointfive0 · 12-12-2013, 07:20 PM

Yank those bitches up, those aren't too bad, they won't break

GalletGun · 12-12-2013, 08:51 PM

hmmmm. so you pull up not sideways into the cabin... it wont unhook no matter how hard I pull without putting insamnt of strnght into it amd breaking it. gah! i hate you Nissan!

Trips · 12-12-2013, 09:08 PM

This will help.

DIY: Illuminated Kick Plates

GalletGun · 12-13-2013, 11:16 AM

Quote:

Originally Posted by Trips

This will help.

DIY: Illuminated Kick Plates

OMG THANK YOU! It answered my question!

Elan · 12-13-2013, 06:13 PM

I just ripped mine out. They are actually pretty durable!

12-12-2013, 02:36 PM	#1 (permalink)
GalletGun Base Member Join Date: Oct 2013 Location: Baton Rouge, LA Posts: 224 Drives: 2013 Nissan 370Z Rep Power: 12	Remove door sill trim and footwell panel The plastic material in the 370z seems so fragile. I tried to look everywhere for this but how do you properly remove the door sill trim at the bottom and the panel by the foot well. I will be running speaker wires through their. They seem to be gripping on really tight so I am afraid to break them if I pull the wrong way. Thanks much!

12-12-2013, 04:24 PM	#4 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	Factory Service Manual (FSM) is the place to start for disassembling procedures. Link in my sig. Edit: a trim panel pry tool comes in handy. kenchan likes this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

12-12-2013, 07:20 PM	#7 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Yank those bitches up, those aren't too bad, they won't break __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language: Last edited by DEpointfive0; 12-13-2013 at 06:42 PM.

12-12-2013, 09:08 PM	#9 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	This will help. DIY: Illuminated Kick Plates SouthArk370Z and BeemaaZ like this. __________________

12-13-2013, 06:13 PM	#11 (permalink)
Elan Track Member Join Date: May 2013 Location: Alpharetta, GA Posts: 906 Drives: Airplanes Rep Power: 16	I just ripped mine out. They are actually pretty durable! DEpointfive0 likes this. __________________ 2009 370Z NISMO #477 \| AAM Competition Short Tails \| AAM Competition HFCs \| K&N Typhoon CAI \| Kenwood DPX300U \| Rockford Fosgate PRIME R300-4 \| Rockford Fosgate Punch P165 \| Rockford Fosgate Punch P300-12 \| Polk Audio db1001 \| 15% Tints \| GTR Start Button \|

12-12-2013, 02:41 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	for speaker wires you can probably just pull up the door seal (rubber) and drop the wires in there.

12-12-2013, 03:43 PM	#3 (permalink)
GalletGun Base Member Join Date: Oct 2013 Location: Baton Rouge, LA Posts: 224 Drives: 2013 Nissan 370Z Rep Power: 12	true but to get to the foot well panel to run wire though the grommet/harness thru the door i believe u have to remove the door sill panel first.

12-12-2013, 04:25 PM	#5 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	^^ very convenient!

12-12-2013, 07:17 PM	#6 (permalink)
GalletGun Base Member Join Date: Oct 2013 Location: Baton Rouge, LA Posts: 224 Drives: 2013 Nissan 370Z Rep Power: 12	okay il check out the FSM. i didnt know it went into details of taking ur car apart. lol

12-12-2013, 08:51 PM	#8 (permalink)
GalletGun Base Member Join Date: Oct 2013 Location: Baton Rouge, LA Posts: 224 Drives: 2013 Nissan 370Z Rep Power: 12	hmmmm. so you pull up not sideways into the cabin... it wont unhook no matter how hard I pull without putting insamnt of strnght into it amd breaking it. gah! i hate you Nissan!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anybody know how to remove the hatch plastic trim?	'10Anamoly	Exterior & Interior	5	11-30-2014 12:51 PM
How to Remove Passenger-side door panel?	kailua	Audio & Video	5	09-10-2014 08:54 PM
How do you remove the door panel	Z370Z011	Exterior & Interior	2	11-01-2012 09:50 PM
door sill	steve11803	New Forum Member	0	07-26-2011 12:48 PM
[FOR SALE] WTB Left door trim panel	v8zracer260z	Parts for sale (Private Classifieds)	0	04-18-2011 10:25 AM