Installed some SRP racing pedal covers - lookin' good.

OldFart · 09-16-2013, 08:56 PM

I know some of the folks here don't go for looks over function but once I seen pictures of these in a DIY post, this went on my list of "mods" to be done. Had to wait a few weeks to get these after ordering, had some spare time this weekend so I thought I'd pop these on. This is a sports edition so I didn't have the covers the touring models do. Here is a picture of the finished product, I like how they turned out. I know the footrest looks crooked but is straight when looking at it head on.

Chuck33079 · 09-16-2013, 09:19 PM

Those look good. Do the screws protrude from the back? I had a set on an old civic I had and the screws on the back of the gas pedal got caught on the floor may at wot. Scared the **** out of me.

OldFart · 09-16-2013, 09:24 PM

Quote:

Originally Posted by Chuck33079

Those look good. Do the screws protrude from the back? I had a set on an old civic I had and the screws on the back of the gas pedal got caught on the floor may at wot. Scared the **** out of me.

They don't protrude too far for the gas pedal as the screws holding the covers on are only about 3/8" to 1/2" long and go thru the original pedal.

AdamRacer · 09-16-2013, 11:01 PM

Those look good. I have been wanting some better looking pedals than the base rubber ones.

simota1 · 09-17-2013, 03:51 AM

looks good... i always wondered do you think the black will rub off? or is powdercoat

OldFart · 09-17-2013, 04:09 AM

Quote:

Originally Posted by simota1

looks good... i always wondered do you think the black will rub off? or is powdercoat

It's powdercoated, takes an extra 2 weeks turn around time with that option.

EastBayZed · 09-17-2013, 06:23 AM

Gave me some new ideas..thanks! Looks good too.

kenchan · 09-17-2013, 11:33 AM

Quote:

Originally Posted by OldFart

They don't protrude too far for the gas pedal as the screws holding the covers on are only about 3/8" to 1/2" long and go thru the original pedal.

looks good.

honda uses rivets to secure their factory aluminum pedal covers on which i found was kind of head scratching. i used screws instead.

09-16-2013, 08:56 PM	#1 (permalink)
OldFart Track Member Join Date: May 2013 Location: Carlisle, PA Age: 62 Posts: 682 Drives: 2011 Wannabe Nismo Rep Power: 960	Installed some SRP racing pedal covers - lookin' good. I know some of the folks here don't go for looks over function but once I seen pictures of these in a DIY post, this went on my list of "mods" to be done. Had to wait a few weeks to get these after ordering, had some spare time this weekend so I thought I'd pop these on. This is a sports edition so I didn't have the covers the touring models do. Here is a picture of the finished product, I like how they turned out. I know the footrest looks crooked but is straight when looking at it head on. kenchan, V8Killer, MyKindaGuise and 1 others like this.

09-16-2013, 09:19 PM	#2 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Those look good. Do the screws protrude from the back? I had a set on an old civic I had and the screws on the back of the gas pedal got caught on the floor may at wot. Scared the **** out of me. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

09-17-2013, 03:51 AM	#5 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	looks good... i always wondered do you think the black will rub off? or is powdercoat __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RJM clutch pedal installed. Small review and noob tips	Leuz	Engine & Drivetrain	8	01-01-2016 09:04 AM
GTS Carbon Print Acrylic Headlight Covers Installed today!	Bandit_Kaine	Exterior & Interior	8	04-29-2013 09:45 PM
Clearbra and Tint installed, plus Boss Coil Covers	FromG2Z	Other Vehicles	21	03-07-2012 02:44 PM
[FOR SALE] SRP Racing pedals (New, never installed)	OTK_Master	Parts for sale (Private Classifieds)	5	02-11-2012 10:12 AM
AP Racing Big Brake Kit Installed!	travisjb	Brakes & Suspension	96	07-28-2011 04:38 PM

09-16-2013, 11:01 PM	#4 (permalink)
AdamRacer Enthusiast Member Join Date: Jan 2012 Location: North Florida Posts: 316 Drives: '12 MBlue 370z 6sp Rep Power: 13	Those look good. I have been wanting some better looking pedals than the base rubber ones.

09-17-2013, 06:23 AM	#7 (permalink)
EastBayZed Base Member Join Date: Feb 2013 Location: Bay Area Posts: 125 Drives: 370z, Sonata Turbo Rep Power: 12	Gave me some new ideas..thanks! Looks good too.