Opinions on Door Handle Painting

w0rM · 07-03-2013, 10:51 PM

So, I went the Plastidip route with my door handles. I did them back in December. Up until the last month or so, it looked pretty good. Since then I've had some peeling and general wear showing.

So, rather than go back to more Plastidip, I've decided to go with paint. I had this idea to do something a little different. I was thinking of painting most of the handle in the body color but painting the pull in a matte black. Or, maybe painting most of the handle matte black and leaving the pull the stock silver (like below).

What do you guys think?

Trips · 07-03-2013, 11:01 PM

Personally just color matching it would look great. imo

UnReal · 07-03-2013, 11:06 PM

I think it looks good in the picture. Hard to tell tho if it fits with the rest of the car.

Nice to see something new

JARblue · 07-03-2013, 11:08 PM

Quote:

Originally Posted by Trips

Personally just color matching it would look great. imo

This is my plan for my GM Z

bdavis89 · 07-03-2013, 11:09 PM

I'm a fan of having the contrast of black, which is why I plasti-dipped mine black. Color matching doesn't look right to me because you can tell the handle is so different compared to a normal handle; its not trying to blend in like a regular handle. For that reason I feel the design calls for it to be a different color.

Trips · 07-03-2013, 11:11 PM

Yea, Early on I went the painted handle route, But for me it just drew to much attention to that part of the car.

w0rM · 07-03-2013, 11:46 PM

Quote:

Originally Posted by bdavis89

I'm a fan of having the contrast of black, which is why I plasti-dipped mine black. Color matching doesn't look right to me because you can tell the handle is so different compared to a normal handle; its not trying to blend in like a regular handle. For that reason I feel the design calls for it to be a different color.

That's one of the reasons I started moving away from the idea of going with the body color. Something about it doesn't look quite right about it. I also considered just having them painted matte black and calling it a day. Same look as Plastidip but more permanent.

Quote:

Originally Posted by Trips

Yea, Early on I went the painted handle route, But for me it just drew to much attention to that part of the car.

So you went back to you stock look?

Trips · 07-03-2013, 11:52 PM

Quote:

Originally Posted by w0rM

That's one of the reasons I started moving away from the idea of going with the body color. Something about it doesn't look quite right about it. I also considered just having them painted matte black and calling it a day. Same look as Plastidip but more permanent.

So you went back to you stock look?

Yes, Since mine is brilliant silver the stock handles blended in a little better

w0rM · 07-03-2013, 11:55 PM

Quote:

Originally Posted by Trips

Yes, Since mine is brilliant silver the stock handles blended in a little better

Ah, gotcha... I probably wouldn't do it on a silver Z either.

Tough call...

07-03-2013, 10:51 PM	#1 (permalink)
w0rM A True Z Fanatic Join Date: May 2012 Location: Houston, TX Posts: 2,198 Drives: 2015 Corvette Z06 Rep Power: 36	Opinions on Door Handle Painting So, I went the Plastidip route with my door handles. I did them back in December. Up until the last month or so, it looked pretty good. Since then I've had some peeling and general wear showing. So, rather than go back to more Plastidip, I've decided to go with paint. I had this idea to do something a little different. I was thinking of painting most of the handle in the body color but painting the pull in a matte black. Or, maybe painting most of the handle matte black and leaving the pull the stock silver (like below). What do you guys think? UnReal likes this. __________________ \| SOLD September 14th, 2013 \| My Build Journal

07-03-2013, 11:01 PM	#2 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	Personally just color matching it would look great. imo JARblue likes this. __________________

07-03-2013, 11:06 PM	#3 (permalink)
UnReal Base Member Join Date: Nov 2012 Location: San Diego Age: 38 Posts: 210 Drives: 13 370ZR A7 Rep Power: 13	I think it looks good in the picture. Hard to tell tho if it fits with the rest of the car. Nice to see something new __________________ ____2013 370z 7AT Roadster Touring + Sport + Navigation .: STILLEN \| CarbonSignal \| Fujimura \| FastIntentions \| ZELE :.

07-03-2013, 11:09 PM	#5 (permalink)
bdavis89 Track Member Join Date: Oct 2011 Location: Jacksonville FL Posts: 586 Drives: '10 370Z PW Auto Rep Power: 15	I'm a fan of having the contrast of black, which is why I plasti-dipped mine black. Color matching doesn't look right to me because you can tell the handle is so different compared to a normal handle; its not trying to blend in like a regular handle. For that reason I feel the design calls for it to be a different color. __________________ 2010 Pearl White Touring Sport Package \| Navigation \| 7 Speed Automatic

07-03-2013, 11:11 PM	#6 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	Yea, Early on I went the painted handle route, But for me it just drew to much attention to that part of the car. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY-Door handle removal	bumblez	DIY Section (Do-It-Yourself)	104	09-29-2017 08:00 PM
Door handle painting mod results	dmhenderson	Mid-Atlantic Region	22	09-14-2012 03:36 PM
Door Handle	theboydiddy	Exterior & Interior	5	03-20-2012 10:04 AM
Door handle rattles from outside...anyone?	zaust	Exterior & Interior	1	02-27-2012 04:21 PM
Fading by Inside Door Handle	MattP725	40th Anniversary 370Z	8	02-04-2012 07:54 PM