Tail Lights

theboydiddy · 10-22-2012, 10:35 AM

Maybe somebody already asked this question, but I was not able to find it.
I wanna change my reverse lights to brighter lights, which I've already purchased. The problem is, I have no clue how to get to the bulb lights.
Do I have to take the entire rear bumper out or take the tail light completely off in order to get to it ?
Any suggestions ? Any ideas ?

cheshirecat · 10-22-2012, 10:44 AM

Yes, you need to remove your tails.

To remove them, pop the plastic cover off of the top of the light. Remove the two 10mm screws. Unlike the 350z, however, you aren't done here.

There's another bolt with a nut that anchors the inside of the light to the chassis. In order to get to this bolt, you need to pop off the corner/side plastic molding (the one that has the luggage tie down clips). Once you do that, you should be able to see the little bolt and nut facing the tail light.

Each light has those three bolts- two 10mm at the top and the one bolt behind the trunk molding.

theboydiddy · 10-22-2012, 11:03 AM

Thank you. I'll attempt that this weekend. I'm sure I won't be successful as usual lol. But I'll give it a shot.
Thanks a lot !

ONEighty · 10-22-2012, 01:02 PM

Everything cheshirecat said is correct. There is one nut in the back that is a PITA to reach, you gotta remove all the plastics in the trunk to get to it. If you are still having a problem, hit me up we are in Brooklyn

theboydiddy · 10-22-2012, 02:03 PM

I am considering to just bring it to you guys to do it for me since i should be there in the second or third week of November to do my headlights as we have discussed already. I have the reverse lights and wire up the fog lights as well, which I already have it in place. Just need to connect all the wires to get it working.

jamesDJRPM · 06-16-2013, 01:09 PM

On the topic of tail lights... Is there any ways to customise them apart from tinting the lens or the JDM Clears..?

simota1 · 06-16-2013, 04:36 PM

Quote:

Originally Posted by jamesDJRPM

On the topic of tail lights... Is there any ways to customise them apart from tinting the lens or the JDM Clears..?

other than tinting them or jdm clears NOPE...

10-22-2012, 10:35 AM	#1 (permalink)
theboydiddy Track Member Join Date: Mar 2012 Location: New York City Posts: 938 Drives: 370z Pearl White Rep Power: 14	Tail Lights Maybe somebody already asked this question, but I was not able to find it. I wanna change my reverse lights to brighter lights, which I've already purchased. The problem is, I have no clue how to get to the bulb lights. Do I have to take the entire rear bumper out or take the tail light completely off in order to get to it ? Any suggestions ? Any ideas ?

10-22-2012, 01:02 PM	#4 (permalink)
ONEighty The370Z.com Sponsor Join Date: Jan 2009 Location: Brooklyn, NY Posts: 277 Drives: 2011 G37S & 2010 S4 Rep Power: 16	Everything cheshirecat said is correct. There is one nut in the back that is a PITA to reach, you gotta remove all the plastics in the trunk to get to it. If you are still having a problem, hit me up we are in Brooklyn DEpointfive0 likes this. __________________ CUSTOM HEADLIGHT DESIGNS AND MODIFICATIONS - PRICES & DETAILS Contact: (347) 821-6176 (M-F 9AM-6PM EST) EMAIL: info@oneightynyc.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JDM tail lights	racerxj17	Exterior & Interior	28	05-21-2019 12:59 PM
WTB: OEM tail lights	Orochi	Wanted	1	11-29-2011 05:16 AM
Tail lights and License plate lights OUT!!!	ohno	Exterior & Interior	8	10-15-2011 03:42 PM
OEM 370z Tail lights FS or Tinted Tail Lights.	daisuke149	Parts for sale (Private Classifieds)	14	01-02-2011 05:55 AM
JDM Tail lights	eXo5	370Ztune	1	05-16-2009 11:51 AM

10-22-2012, 10:44 AM	#2 (permalink)
cheshirecat A True Z Fanatic Join Date: Jan 2009 Location: Florida Posts: 1,428 Drives: N54 135i Rep Power: 292	Yes, you need to remove your tails. To remove them, pop the plastic cover off of the top of the light. Remove the two 10mm screws. Unlike the 350z, however, you aren't done here. There's another bolt with a nut that anchors the inside of the light to the chassis. In order to get to this bolt, you need to pop off the corner/side plastic molding (the one that has the luggage tie down clips). Once you do that, you should be able to see the little bolt and nut facing the tail light. Each light has those three bolts- two 10mm at the top and the one bolt behind the trunk molding.

10-22-2012, 11:03 AM	#3 (permalink)
theboydiddy Track Member Join Date: Mar 2012 Location: New York City Posts: 938 Drives: 370z Pearl White Rep Power: 14	Thank you. I'll attempt that this weekend. I'm sure I won't be successful as usual lol. But I'll give it a shot. Thanks a lot !

10-22-2012, 02:03 PM	#5 (permalink)
theboydiddy Track Member Join Date: Mar 2012 Location: New York City Posts: 938 Drives: 370z Pearl White Rep Power: 14	I am considering to just bring it to you guys to do it for me since i should be there in the second or third week of November to do my headlights as we have discussed already. I have the reverse lights and wire up the fog lights as well, which I already have it in place. Just need to connect all the wires to get it working.

06-16-2013, 01:09 PM	#6 (permalink)
jamesDJRPM Base Member Join Date: Mar 2013 Location: Australia Posts: 57 Drives: Twin Turbo 370Z Rep Power: 12	On the topic of tail lights... Is there any ways to customise them apart from tinting the lens or the JDM Clears..?