Hello guys, been dealing with this weird metallic-ish rattle coming from the seat belt receiver/rear quarter glass area for a LONG time now. Searched to and fro on this forum
|
|
LinkBack | Thread Tools | Display Modes |
09-04-2021, 06:26 PM | #1 (permalink) |
Base Member
Join Date: Oct 2019
Location: Atlanta
Posts: 36
Drives: 2017 Nismo
Rep Power: 3361 |
B Pillar/Rear Quarter Glass Rattle
Hello guys, been dealing with this weird metallic-ish rattle coming from the seat belt receiver/rear quarter glass area for a LONG time now. Searched to and fro on this forum and from my research over the past months nobody quite has this exact problem.
I attached a video with this sound... this has been happening with my STOCK exhaust and my now aftermarket one. This happens only at speed(60+ mph), there is no sound at city speeds(10-45 mph). Also this same sound is happening on the passenger side in the same area but that one doesn't rattle all the time.. and when it does it's very faint. https://www.youtube.com/watch?v=RqMpzMCMezA Today I removed the rear plastics and drove with them all off... noise was still there. Pinpointed it where my suspicion was... b-pillar/rear quarter area. Also previously took the exterior b-pillar cover off and the noise was still there. Running out of ideas... I'm thinking I may have to buy a whole new seat belt receiver. Or could this be a heat shield under the car? Any help would be appreciated, getting desperate |
09-04-2021, 07:14 PM | #2 (permalink) |
Enthusiast Member
Join Date: Aug 2016
Location: SE Texas
Posts: 448
Drives: '16 Nismo Tech
Rep Power: 28413 |
I have the same rattle in my 16 NISMO, but the push-in holder on my B pillar trim is broken, so I just assumed it was that. Mine will rattle regardless of shred, but it has to be on a rough road. It's quiet on smooth asphalt or concrete.
Kirk B. |
09-07-2021, 04:34 PM | #4 (permalink) | |
A True Z Fanatic
Join Date: Feb 2018
Location: Atlanta
Posts: 1,845
Drives: Miss Daisy
Rep Power: 613733 |
Quote:
Again, just throwing it out there. Good luck and let us know how you make out when you find the problem.
__________________
Stillen Gen 3 CAI, Fast Intentions CBE, Z1 34 Row Oil Cooler, Ecuteck Tuned by Dave at Z1, Clear Bra, Z1 Hood Stuts |
|
09-11-2021, 05:57 PM | #5 (permalink) | |
Base Member
Join Date: Oct 2019
Location: Atlanta
Posts: 36
Drives: 2017 Nismo
Rep Power: 3361 |
Quote:
I just hope the new Z doesn't fall victim to all these horrendous rattles the current has. Wishful thinking |
|
12-23-2021, 09:44 PM | #6 (permalink) |
Base Member
Join Date: Oct 2019
Location: Atlanta
Posts: 36
Drives: 2017 Nismo
Rep Power: 3361 |
Little update.. been having another rattle/vibration only at a certain speed and rpm. Research tells me maybe my tires need to be balanced? I can trace the sound to the passenger side under the car(sounds like its coming from near the cats area)
Video: https://www.youtube.com/watch?v=O5DfEARMjDM Also was able to get the car on the lift and I was surprised to find no loose exhaust parts... I'm out of ideas Last edited by Blizzak; 12-23-2021 at 09:47 PM. |
09-15-2022, 04:59 PM | #7 (permalink) |
Base Member
Join Date: Oct 2019
Location: Atlanta
Posts: 36
Drives: 2017 Nismo
Rep Power: 3361 |
UPDATE ISSUES SOLVED:
After dealing with this noise on my SECOND Z (Nismo at 16K mi) I have finally found the issue… and it’s a faulty defective manufacture part. The noise is coming from the seatbelt bracket (where the 14mm anchor bolt is) After this part came loose and stripped I took it to the dealership and was replaced under seatbelt warranty… hope this helps |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear Quarter Panel | chemi19 | Exterior & Interior | 18 | 03-10-2015 11:44 PM |
Rear Quarter Panel Rattle | LostSol | Exterior & Interior | 1 | 04-26-2014 03:19 PM |
Rear Quarter Panel | shoopajae10 | Exterior & Interior | 33 | 02-16-2012 05:45 AM |