Gauge Needle stuck

zpwrgirl · 03-17-2021, 09:23 PM

Hey guys

So, I took my tach/speedometer gauges apart to look at the leds as I want to change them out soon. I got curious and pulled the needles off as I also pulled everything behind them off. However, once I reinstalled and adjusted everything, the tach needle started acting weird. It has slowly gone up, but not down, and has now rested above 9k. The speedometer gauge appears to be working properly as well.

I'm curious what can be done, outside going to the dealership or a body shop, to fix the tach to work properly. I've checked as well and the needle is not getting stuck.

Any ideas or help is greatly appreciated, as always

Thanks!

Spooler · 03-17-2021, 09:31 PM

Sounds like you are buying a new Tach from Nissan. Not sure what you did.

SouthArk370Z · 03-18-2021, 12:33 AM

Make sure the pointer is not loose on the shaft and that you didn't knock loose any if the wiring/contacts.

If that's not the problem, I'm afraid Spooler is right.

zpwrgirl · 03-18-2021, 07:02 AM

I haven't taken it back apart since this happened, so I'm hoping it's just the needle.

I can say if it is the gauge itself, I'll be living with it. I refuse the pay the crazy price nissan wants for any part. (I guess a totaled Z would work too)

redondoaveb · 03-18-2021, 10:15 AM

Quote:

Originally Posted by zpwrgirl

I haven't taken it back apart since this happened, so I'm hoping it's just the needle.

I can say if it is the gauge itself, I'll be living with it. I refuse the pay the crazy price nissan wants for any part. (I guess a totaled Z would work too)

I've taken mine apart before and removed the needles. I marked exactly where the needles were pointing prior to removing them and then I made sure that they were reinstalled in the same position. I also found that you can push them back on too far and they'll drag.

zpwrgirl · 03-18-2021, 02:42 PM

Quote:

Originally Posted by redondoaveb

I've taken mine apart before and removed the needles. I marked exactly where the needles were pointing prior to removing them and then I made sure that they were reinstalled in the same position. I also found that you can push them back on too far and they'll drag.

I'm hoping that's all it is. I know I put them on in the same position as they were removed, but I'm now wondering if I did what you said and put them on too tight. Will check that this weekend.

Thanks!

redondoaveb · 03-18-2021, 03:03 PM

Quote:

Originally Posted by zpwrgirl

I'm hoping that's all it is. I know I put them on in the same position as they were removed, but I'm now wondering if I did what you said and put them on too tight. Will check that this weekend.

Thanks!

Just try prying them up a little bit. That will keep the needle from bottoming out against the gauge face.

03-17-2021, 09:23 PM	#1 (permalink)
zpwrgirl Base Member Join Date: Feb 2020 Location: Ohio Posts: 28 Drives: 19 370z Black Manual Rep Power: 5	Gauge Needle stuck Hey guys So, I took my tach/speedometer gauges apart to look at the leds as I want to change them out soon. I got curious and pulled the needles off as I also pulled everything behind them off. However, once I reinstalled and adjusted everything, the tach needle started acting weird. It has slowly gone up, but not down, and has now rested above 9k. The speedometer gauge appears to be working properly as well. I'm curious what can be done, outside going to the dealership or a body shop, to fix the tach to work properly. I've checked as well and the needle is not getting stuck. Any ideas or help is greatly appreciated, as always Thanks!

03-18-2021, 12:33 AM	#3 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	Make sure the pointer is not loose on the shaft and that you didn't knock loose any if the wiring/contacts. If that's not the problem, I'm afraid Spooler is right. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Needle sweeping on startup not working	elmz	Nissan 370Z General Discussions	18	07-14-2017 10:35 PM
Broke the Needle Off...	rhd	New 370Z Owner	6	03-17-2012 10:06 PM
Anyone else have their gas gauge stuck on Full?	VCuomo	Nissan 370Z General Discussions	21	11-04-2010 08:45 PM
Tach needle sticking...	ssqpolo	Nissan 370Z General Discussions	3	07-15-2009 04:57 PM
What happened to the tire pressure gauge and speedo in the middle gauge cluster?	rbratton	Nissan 370Z General Discussions	33	01-24-2009 11:28 PM

03-17-2021, 09:31 PM	#2 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Sounds like you are buying a new Tach from Nissan. Not sure what you did.

03-18-2021, 07:02 AM	#4 (permalink)
zpwrgirl Base Member Join Date: Feb 2020 Location: Ohio Posts: 28 Drives: 19 370z Black Manual Rep Power: 5	I haven't taken it back apart since this happened, so I'm hoping it's just the needle. I can say if it is the gauge itself, I'll be living with it. I refuse the pay the crazy price nissan wants for any part. (I guess a totaled Z would work too)