Where is the Turn signal fuse?

Martijn_b · 08-29-2020, 04:50 AM

Problem:

-Turn signals dont work
-Turn signal "stick" doesnt go back into position automatically
-No "click-click" sound when putting turn signal out
-Light on dash doesnt go on

The hazard light button + turn signals function perfectly so bulbs are fine.

Background:
- Car was found with dead battery (2.3v) whilst at paintshop
- Battery Booster used for 30m, no significant improvememt
- Battery replaced with a new unit

The headlights low beam also didnt work, i found 2 blown 15a fuses in the big fusebox near the battery and replaced them.

I also had a lot of DTC codes on the BCM, erased them and they didnt come back yet.

Does anyone know where the turn signal fuse is located?

Sent from my SM-G973F using Tapatalk

jchammond · 08-29-2020, 05:05 AM

Sounds like they over volted the old battery while charging in car, resulting in some failed fuses,etc...
Look at fuse block under hood, near battery at fender well,..a manual will show you what’s in there & location; also it’s printed on the inside of cover

Martijn_b · 08-29-2020, 05:06 AM

Yeah i think so too. But so far cant find a fuse for turn signals in the FSM nor the fusebox next to the driver side footwell nor battery.

Sent from my SM-G973F using Tapatalk

jchammond · 08-29-2020, 05:07 AM

I see you have a 2010, may want to disable the steering lock while you’re in that fuse block....with ignition in on position, pull steering lock fuse & it will stay put.
That is, unless you’ve already corrected the problem.

jchammond · 08-29-2020, 05:08 AM

Quote:

Originally Posted by Martijn_b

Yeah i think so too. But so far cant find a fuse for turn signals in the FSM nor the fusebox next to the driver side footwell nor battery.

Sent from my SM-G973F using Tapatalk

Turn hazard lights on & see if you can locate that flasher/module

jchammond · 08-29-2020, 05:12 AM

I see,

Unsure if there’s a third one...unless your multifunction switch is failing

jchammond · 08-29-2020, 05:17 AM

Hopefully not a failed bcm

Martijn_b · 08-29-2020, 07:37 AM

I just read that low beam fuse and turn signals are combined in one. Now trying to find the relay, maybe that failed..

Sent from my SM-G973F using Tapatalk

Martijn_b · 08-29-2020, 09:12 AM

Switched out the relay, works fine.

Im afraid its the BCM. Any ways to diagnose a faulty BCM? I have no codes reading DTC's with ecutek

Sent from my SM-G973F using Tapatalk

Martijn_b · 08-31-2020, 05:48 PM

Dealership confirmed its the BCM. $1.200 repair bill. Paint shop confessed guilty by mis-using the battery booster.

Thanks for the suggestions in this thread and be careful when using a booster!

Sent from my SM-G973F using Tapatalk

redondoaveb · 08-31-2020, 06:08 PM

Quote:

Originally Posted by Martijn_b

Dealership confirmed its the BCM. $1.200 repair bill. Paint shop confessed guilty by mis-using the battery booster.

Thanks for the suggestions in this thread and be careful when using a booster!

Sent from my SM-G973F using Tapatalk

Just out of curiosity, how did the shop mis-use the battery booster?

Martijn_b · 09-01-2020, 05:21 PM

I actually dont know. Maybe they set it to 24v, or switched polarities.

Sent from my SM-G973F using Tapatalk

370zBLAST · 09-05-2020, 09:11 AM

Quote:

Originally Posted by Martijn_b

Switched out the relay, works fine.

Im afraid its the BCM. Any ways to diagnose a faulty BCM? I have no codes reading DTC's with ecutek

Sent from my SM-G973F using Tapatalk

were is the turn signal relay? im having the same issue

POS VETT · 09-06-2020, 07:02 AM

I can almost bet money that the booster was hooked up in reverse and fried some electronic control modules.

Martijn_b · 09-07-2020, 03:56 PM

They fried the BCM indeed. And paid for replacing it.

Now, after replacing the BCM my trunk wont open anymore. So ill go back on friday. I hope its a easy fix and they forgot to code something in the bcm.

Sent from my SM-G973F using Tapatalk

08-29-2020, 04:50 AM	#1 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3786	Where is the Turn signal fuse? Problem: -Turn signals dont work -Turn signal "stick" doesnt go back into position automatically -No "click-click" sound when putting turn signal out -Light on dash doesnt go on The hazard light button + turn signals function perfectly so bulbs are fine. Background: - Car was found with dead battery (2.3v) whilst at paintshop - Battery Booster used for 30m, no significant improvememt - Battery replaced with a new unit The headlights low beam also didnt work, i found 2 blown 15a fuses in the big fusebox near the battery and replaced them. I also had a lot of DTC codes on the BCM, erased them and they didnt come back yet. Does anyone know where the turn signal fuse is located? Sent from my SM-G973F using Tapatalk __________________ Instagram: Boosted_Fairlady

08-29-2020, 05:05 AM	#2 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Sounds like they over volted the old battery while charging in car, resulting in some failed fuses,etc... Look at fuse block under hood, near battery at fender well,..a manual will show you what’s in there & location; also it’s printed on the inside of cover Martijn_b and J.O. like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

08-29-2020, 05:06 AM	#3 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3786	Yeah i think so too. But so far cant find a fuse for turn signals in the FSM nor the fusebox next to the driver side footwell nor battery. Sent from my SM-G973F using Tapatalk __________________ Instagram: Boosted_Fairlady

08-29-2020, 05:07 AM	#4 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	I see you have a 2010, may want to disable the steering lock while you’re in that fuse block....with ignition in on position, pull steering lock fuse & it will stay put. That is, unless you’ve already corrected the problem. SouthArk370Z, Hotrodz and Martijn_b like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

08-29-2020, 05:12 AM	#6 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	I see, Unsure if there’s a third one...unless your multifunction switch is failing __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

08-29-2020, 05:17 AM	#7 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Hopefully not a failed bcm __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

08-29-2020, 07:37 AM	#8 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3786	I just read that low beam fuse and turn signals are combined in one. Now trying to find the relay, maybe that failed.. Sent from my SM-G973F using Tapatalk __________________ Instagram: Boosted_Fairlady

08-29-2020, 09:12 AM	#9 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3786	Switched out the relay, works fine. Im afraid its the BCM. Any ways to diagnose a faulty BCM? I have no codes reading DTC's with ecutek Sent from my SM-G973F using Tapatalk __________________ Instagram: Boosted_Fairlady

08-31-2020, 05:48 PM	#10 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3786	Dealership confirmed its the BCM. $1.200 repair bill. Paint shop confessed guilty by mis-using the battery booster. Thanks for the suggestions in this thread and be careful when using a booster! Sent from my SM-G973F using Tapatalk redondoaveb likes this. __________________ Instagram: Boosted_Fairlady

09-01-2020, 05:21 PM	#12 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3786	I actually dont know. Maybe they set it to 24v, or switched polarities. Sent from my SM-G973F using Tapatalk redondoaveb likes this. __________________ Instagram: Boosted_Fairlady

09-06-2020, 07:02 AM	#14 (permalink)
POS VETT Track Member Join Date: Apr 2015 Location: Columbus OH Posts: 612 Drives: Z34\|C4LT4\|C6Z06\|V25 Rep Power: 3366	I can almost bet money that the booster was hooked up in reverse and fried some electronic control modules.

09-07-2020, 03:56 PM	#15 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3786	They fried the BCM indeed. And paid for replacing it. Now, after replacing the BCM my trunk wont open anymore. So ill go back on friday. I hope its a easy fix and they forgot to code something in the bcm. Sent from my SM-G973F using Tapatalk madwi likes this. __________________ Instagram: Boosted_Fairlady

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where to tap Turn Signal Wires??	Bandit_Kaine	Exterior & Interior	2	11-26-2019 08:36 PM
LED turn signal damage.	NZ.Z	Exterior & Interior	3	02-22-2017 10:16 AM
Turn Signal Clicker	Don-MT	Nissan 370Z General Discussions	7	08-23-2016 11:18 AM
[WTB] Z turn signal indicators	Solidandre	Parts for sale (Private Classifieds)	3	07-24-2016 02:31 PM
Loose turn signal	Big J	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	1	01-26-2011 03:54 PM