TBW Aluminum under tray

bimbimbop · 08-24-2018, 08:42 AM

Anyone seen or used this under tray made by TBW? https://www.outcastgarage.com/produc...nder-tray-370z

I am interested in this as Z1 made one like this for the 350 but not the 370 yet. Looks like a good quality build and like the 3 piece design. Just not sure if it is worth it or not. What do you all think?

JTM88 · 08-24-2018, 09:02 AM

I have the Z Speed undershroud from Z1. It's great, the only reason I bought it was because my stock one was trashed.

axmea? · 08-24-2018, 09:03 AM

I've used it and had no issues with it. Fitment was spot on.

bimbimbop · 08-24-2018, 09:25 AM

Quote:

Originally Posted by axmea?

I've used it and had no issues with it. Fitment was spot on.

What about for a twin turbo setup? A little extra space needed... does it have decent clearance for the pipes that stick a little bit underneath and added oil space pan?

Sent from my iPhone using Tapatalk

bimbimbop · 08-24-2018, 09:26 AM

Quote:

Originally Posted by JTM88

I have the Z Speed undershroud from Z1. It's great, the only reason I bought it was because my stock one was trashed.

I like the zapped one as well...this one caught my eye as it’s a 3 piece setup...not sure if that would help for the times I do scrape or bend just one section than I can just replace the section instead of the whole thing

Sent from my iPhone using Tapatalk

axmea? · 08-24-2018, 11:45 AM

Not sure about twin turbo set ups but if you need more clearance you can try using longer bolts and spacers. I do know that it had more than enough clearance for the sway bars.

Rusty · 08-24-2018, 08:07 PM

I beat up one corner of my ZSpeed under tray during a trackday. When I got home. I removed it. And took a hammer to it to straighten out the corner. It was bent pretty good.

g96818 · 08-25-2018, 05:04 AM

I have the ZSpeed undershroud.

I don't trust TBW. I bought their undershroud for my M56 and i had to modify the bolt holes for it to line up.

08-24-2018, 08:42 AM	#1 (permalink)
bimbimbop Base Member Join Date: Jun 2017 Location: Seoul Posts: 140 Drives: 12 370Z NISMO Rep Power: 8	TBW Aluminum under tray Anyone seen or used this under tray made by TBW? https://www.outcastgarage.com/produc...nder-tray-370z I am interested in this as Z1 made one like this for the 350 but not the 370 yet. Looks like a good quality build and like the 3 piece design. Just not sure if it is worth it or not. What do you all think? __________________ 2012 Nismo AAM TT, CJM S1.SE Fuel System, AAM 3" True Dual Exhaust, CC 6 Puck Clutch/flywheel, Z1 engine/transmission mounts, Sparta Big Brake, ECUtek Tune, SPC Cambers, Whiteline Swaybar, KW V3 coilovers, Zspeed CMAK kit 542Whp 450TQ

08-24-2018, 09:02 AM	#2 (permalink)
JTM88 Enthusiast Member Join Date: Oct 2016 Location: Houston, TX Posts: 276 Drives: 2012 370Z Rep Power: 14	I have the Z Speed undershroud from Z1. It's great, the only reason I bought it was because my stock one was trashed. bimbimbop likes this. __________________ 2012 Base Gun Metallic MT6 -CNT Racing CBE-Swift Sport Springs-Sport Akebono BBK-Z1 Motorsports Intakes-König Oversteer Wheels-1320 Resonated Test Pipes -RJM Rev 2.1 Clutch Pedal-

08-24-2018, 09:03 AM	#3 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,235 Drives: WELL ZED PW 6MT Rep Power: 53241	I've used it and had no issues with it. Fitment was spot on. Tractionless and bimbimbop like this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

08-24-2018, 11:45 AM	#6 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,235 Drives: WELL ZED PW 6MT Rep Power: 53241	Not sure about twin turbo set ups but if you need more clearance you can try using longer bolts and spacers. I do know that it had more than enough clearance for the sway bars. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

08-24-2018, 08:07 PM	#7 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I beat up one corner of my ZSpeed under tray during a trackday. When I got home. I removed it. And took a hammer to it to straighten out the corner. It was bent pretty good. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

08-25-2018, 05:04 AM	#8 (permalink)
g96818 Track Member Join Date: May 2009 Location: A rock in a big pond Posts: 681 Drives: 2009 370Z, 2012 M56 Rep Power: 3394	I have the ZSpeed undershroud. I don't trust TBW. I bought their undershroud for my M56 and i had to modify the bolt holes for it to line up. __________________ CZP are lying thieves!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone done a DIY metal under-tray?	AstatenateZ	DIY Section (Do-It-Yourself)	7	03-30-2018 08:00 PM
[WTB] Zspeed Under tray	jgibbons	Parts for sale (Private Classifieds)	0	11-08-2013 03:22 PM
Fix for the rattling front under tray.	Rusty	Exterior & Interior	10	11-04-2013 10:53 AM
[FOR SALE] BERK CBE & HFC's - Z Speed Aluminum Tray - NJ	Dystopia	Parts for sale (Private Classifieds)	22	10-23-2013 04:16 PM
[FOR SALE] Arm Rest Cup Holder Tray	stubie1918	Parts for sale (Private Classifieds)	26	07-15-2013 08:45 PM