2015 Nismo front fascia kit clearance

razzzor · 01-08-2018, 04:24 PM

Does anyone know how much lower the 2015 Nismo front fascia sits compared to the standard one? I'm looking at putting it on a 2009 model but don't want to get it if it sits a lot lower to ground. I won't be able to get out of my own driveway without it scraping if it's more than an inch lower

This one: https://www.z1motorsports.com/front-...it-p-8198.html
I emailed Z1 but they didn't seem certain "may be about a half inch lower".

Thanks.

OptionZero · 01-08-2018, 05:37 PM

I don't have a non-Nismo bumper but the lip part actually angles upward slightly, and overall the 2015+ Nismo aero isn't low at all

The only part that might scrape is the rubber crap underneath, but . . . thats why its there

Volk Z · 02-15-2018, 02:46 AM

It's really low. My nismo was lowered around 1.5 to 1.75 inches and I only have around 3 to 3.25 inches of clearance.
So stock sits I would say around 5 inches plus or minus. It is true the plastic crap is what's the lowest but the slant doesn't mean that isn't susceptible to scraping.

Hope that helps.

01-08-2018, 04:24 PM	#1 (permalink)
razzzor Base Member Join Date: Apr 2015 Location: New Zealand Posts: 11 Drives: '94 Supra + '08 370z Rep Power: 10	2015 Nismo front fascia kit clearance Does anyone know how much lower the 2015 Nismo front fascia sits compared to the standard one? I'm looking at putting it on a 2009 model but don't want to get it if it sits a lot lower to ground. I won't be able to get out of my own driveway without it scraping if it's more than an inch lower This one: https://www.z1motorsports.com/front-...it-p-8198.html I emailed Z1 but they didn't seem certain "may be about a half inch lower". Thanks. wideglideleon likes this.

01-08-2018, 05:37 PM	#2 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,249 Drives: 15 370Z Nismo 6MT Rep Power: 214100	I don't have a non-Nismo bumper but the lip part actually angles upward slightly, and overall the 2015+ Nismo aero isn't low at all The only part that might scrape is the rubber crap underneath, but . . . thats why its there __________________ OptionZero Build Thread

02-15-2018, 02:46 AM	#3 (permalink)
Volk Z A True Z Fanatic Join Date: Aug 2011 Location: Laguna Beach, CA Posts: 2,214 Drives: Nismo Z Rep Power: 3066	It's really low. My nismo was lowered around 1.5 to 1.75 inches and I only have around 3 to 3.25 inches of clearance. So stock sits I would say around 5 inches plus or minus. It is true the plastic crap is what's the lowest but the slant doesn't mean that isn't susceptible to scraping. Hope that helps. __________________ AMUSE * TOMEI * STILLEN * CRAFTSQUARE RECARO * 3M * TOP SECRET * SLICKCARBON

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nismo front fascia	MB_Z	Z1 Motorsports	12	11-02-2016 06:20 PM
[WTB] 09-14 Nismo Front Fascia	CM370z	Parts for sale (Private Classifieds)	2	04-17-2016 08:29 PM
[FOR SALE] 2015 Nismo Front Fascia Kit	Whytlytnin	Parts for sale (Private Classifieds)	25	08-27-2015 12:33 AM
Question about Nismo Front Fascia	Nargrakhan	Nissan 370Z General Discussions	28	05-29-2014 09:22 PM
NISMO Front Fascia Chin Guard	Kendrick777	Nismo 370Z	21	08-28-2013 04:22 PM