Getting Fuji Front bumper

drentooth · 10-08-2017, 10:47 AM

Planning on picking up this bumper for my 370z because of the aggressive look. Only thing that's holding me back is the fact that it shows the reservoir tank on the right front. Is there any way this can be concealed without having any problems???

Jayhovah · 10-08-2017, 11:21 AM

Quote:

Originally Posted by drentooth

Planning on picking up this bumper for my 370z because of the aggressive look. Only thing that's holding me back is the fact that it shows the reservoir tank on the right front. Is there any way this can be concealed without having any problems???

Paint the reservoir black?

axmea? · 10-09-2017, 03:34 PM

Just for fun I would run a piece of narrow painters tape on the side from top to bottom so you can see fluid level when you're up close.

JARblue · 10-09-2017, 04:12 PM

Some forced induction kits require replacement of the windshield washer reservoir with a smaller one to make room for piping. The intercooler will draw eyes away from the reservoir anyway. At least that's the direction I'd go

echoshotz · 10-09-2017, 05:22 PM

I removed mine when routing brake ducting and and oil cooler lines. Haven't missed it...

Jayhovah · 10-09-2017, 05:23 PM

Quote:

Originally Posted by JARblue

Some forced induction kits require replacement of the windshield washer reservoir with a smaller one to make room for piping. The intercooler will draw eyes away from the reservoir anyway. At least that's the direction I'd go

Directions for a DIY bottle like this are in my sig

JARblue · 10-09-2017, 09:19 PM

Quote:

Originally Posted by Jayhovah

Directions for a DIY bottle like this are in my sig

I guess you could do that without adding boost. Just seems a little half-assed to me

ZeroZeta · 10-10-2017, 01:22 AM

I believe my Varis instructions also recommend painting it black since the Arising bumper also has large vents.

I ended up removing it and like echoshotz haven't missed it a bit.

Don't let the reservoir concern prevent you from getting a cool front you like.

DarkJak · 10-10-2017, 12:18 PM

Create something like this if you don't want to paint the stock one black and can't find a smaller reservoir: DIY: Windshield Washer Reservoir for the Boosted

I was looking into this with the idea of getting the Fuji front for better brake ducting, since it'd create room to route ducts through

10-08-2017, 10:47 AM	#1 (permalink)
drentooth Base Member Join Date: Jan 2017 Location: Atlanta, GA, USA Posts: 25 Drives: 2009 Nissan 370z Rep Power: 8	Getting Fuji Front bumper Planning on picking up this bumper for my 370z because of the aggressive look. Only thing that's holding me back is the fact that it shows the reservoir tank on the right front. Is there any way this can be concealed without having any problems??? Last edited by drentooth; 10-08-2017 at 10:51 AM.

10-09-2017, 03:34 PM	#3 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,236 Drives: WELL ZED PW 6MT Rep Power: 53241	Just for fun I would run a piece of narrow painters tape on the side from top to bottom so you can see fluid level when you're up close. Jayhovah likes this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

10-09-2017, 04:12 PM	#4 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Some forced induction kits require replacement of the windshield washer reservoir with a smaller one to make room for piping. The intercooler will draw eyes away from the reservoir anyway. At least that's the direction I'd go echoshotz likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

10-09-2017, 05:22 PM	#5 (permalink)
echoshotz Base Member Join Date: May 2015 Location: Knoxville, TN Posts: 218 Drives: 14 Nismo Rep Power: 73	I removed mine when routing brake ducting and and oil cooler lines. Haven't missed it... Hotrodz and Wonka2581 like this. __________________ 2014 Solid Red Nismo 370z Motordyne\|Synergy Composites\|Stance Suspension\|Recaro\|RJM\|EVOR

10-10-2017, 12:18 PM	#9 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,397 Drives: 2009 370Z Rep Power: 16804	Create something like this if you don't want to paint the stock one black and can't find a smaller reservoir: DIY: Windshield Washer Reservoir for the Boosted I was looking into this with the idea of getting the Fuji front for better brake ducting, since it'd create room to route ducts through Jayhovah likes this. __________________ @stupidtoycars \| My track vids 09 7AT\|MCS 2WNR\|Topgunz Rotrex\|Ecutek (Eugene)\|Maxxis RC1\|Titan-7 TS-5\|OSG LSD\|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler\|Fismo\|G-LOC R12/R10\|Zeta III L\|NLR Wing and Splitter\|CJM Pan and Fuel Hat\|Radium Surge Tank\|AP Racing CP9668

10-10-2017, 01:22 AM	#8 (permalink)
ZeroZeta Track Member Join Date: Aug 2013 Location: Austin TX Posts: 543 Drives: 2013 Z Rep Power: 13	I believe my Varis instructions also recommend painting it black since the Arising bumper also has large vents. I ended up removing it and like echoshotz haven't missed it a bit. Don't let the reservoir concern prevent you from getting a cool front you like.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Full Hex Carbon RS1 Fenders 1 of 1 Full Hex Fuji front bumper	S3bastiian	Parts for sale (Private Classifieds)	3	10-28-2016 02:06 AM
Fly1 Motorsports Fuji Style Front Bumper!	Fly1 Motorsports	Body Interior/Exterior	83	10-12-2016 03:59 PM
[WTB] amuse sides, rear, rear wing, fuji front or lip!	btimola	Parts for sale (Private Classifieds)	1	05-18-2016 04:15 PM
[WTB] looking for intakes, springs, amuse rear and skirts, fuji front, tt kit.	btimola	Parts for sale (Private Classifieds)	15	12-20-2014 07:26 AM