2010 base/sport touring seats install no power...need help!!

slippery4678 · 08-09-2017, 09:25 PM

I've seen a few threads about this already, with no apparent resolution. I recently purchase 40th seats off the forum and attempted to install them. I disconnected the battery and swapped the seats and reconnected everything. When I tried to move the seats, no power. I'm now stuck with 2 seats moved all the way up. If anyone has faced this issue, please let me know what you did to resolve it. Also, while I appreciate a good DIY, am rather weak in the electrical department so speak to me as if I'm 5 if you're talking about harnesses/bypasses/fuses.

Thanks in advance!!!!

cooltoy · 08-09-2017, 10:54 PM

Did your car have power seats?

nis350 · 08-10-2017, 12:32 AM

Title indicated base model.... so no power seats. guess it is self-explanatory.

Quote:

Originally Posted by cooltoy

Did your car have power seats?

cooltoy · 08-10-2017, 01:04 AM

Title says base/sport touring, so I guess it is more confusing then self explanatory. A title like "Installed sport touring seats into 2010 base and there is no power" would have not prompted my question.

cooltoy · 08-10-2017, 01:07 AM

If it is a base, then I believe power seats will not work.

slippery4678 · 08-10-2017, 06:15 AM

Sorry for the confusing title. Yes. It is a base with no leather/power seats to begin with. I read that the 2011's & 12's had the power and just assumed mine did when I purchased, since it has the power connection under the seat.

SouthArk370Z · 08-10-2017, 07:26 AM

Since the connector is there, you may be able to track down the other end and connect to power. FSM (link in my sig) has wiring diagrams, connector pinouts, wire colors, etc.

Edit: There will probably be some relays that will need to be installed as the BCM cannot supply that much power. FSM should have details.

cooltoy · 08-10-2017, 09:27 AM

Quote:

Originally Posted by Puke

Thank you guys for your input, from what I have gathered and is by no means accurate but here goes:
2009-2010 models did not come with the additional wiring harness and plugs so we are a long ways from "plug and play". Also, as far as I can tell the 2011 and later models had the wiring in place so you guys had it easy��.

....

slippery4678 · 08-10-2017, 10:36 AM

Quote:

Originally Posted by SouthArk370Z

Since the connector is there, you may be able to track down the other end and connect to power. FSM (link in my sig) has wiring diagrams, connector pinouts, wire colors, etc.

Edit: There will probably be some relays that will need to be installed as the BCM cannot supply that much power. FSM should have details.

Thanks SouthArk and cooltoy. I think it's way out of my scope to tackle...gonna have to take it to the stealership

slippery4678 · 08-11-2017, 08:18 AM

Found that the fuse and relay under the hood are there. There is one more relay according to the diagram behind the dash that I will be looking for today. If that's there, I'm out of ideas. Is there any place other than the dealer I should take it? Car audio shop or something?

08-09-2017, 09:25 PM	#1 (permalink)
slippery4678 Base Member Join Date: Jul 2010 Location: S. Jerz/Arlington VA Posts: 58 Drives: 2010 370z PG + sport Rep Power: 15	Installed touring seats into 2010 base and there is no power...need help! I've seen a few threads about this already, with no apparent resolution. I recently purchase 40th seats off the forum and attempted to install them. I disconnected the battery and swapped the seats and reconnected everything. When I tried to move the seats, no power. I'm now stuck with 2 seats moved all the way up. If anyone has faced this issue, please let me know what you did to resolve it. Also, while I appreciate a good DIY, am rather weak in the electrical department so speak to me as if I'm 5 if you're talking about harnesses/bypasses/fuses. Thanks in advance!!!! __________________ Stillen CBE \| Berk HFC's \| Intake Plenum \| AAM UpRev Tune \| Swift Spec-R Springs \| H&R 15/20 Spacers \| 265/285's \| Stillen Sways \| 20% tint Last edited by slippery4678; 08-10-2017 at 06:17 AM.

08-09-2017, 10:54 PM	#2 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Did your car have power seats? __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

08-10-2017, 01:04 AM	#4 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Title says base/sport touring, so I guess it is more confusing then self explanatory. A title like "Installed sport touring seats into 2010 base and there is no power" would have not prompted my question. Memphis370Z and DeliriousClam like this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang. Last edited by cooltoy; 08-10-2017 at 01:12 AM.

08-10-2017, 01:07 AM	#5 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	If it is a base, then I believe power seats will not work. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

08-10-2017, 06:15 AM	#6 (permalink)
slippery4678 Base Member Join Date: Jul 2010 Location: S. Jerz/Arlington VA Posts: 58 Drives: 2010 370z PG + sport Rep Power: 15	Sorry for the confusing title. Yes. It is a base with no leather/power seats to begin with. I read that the 2011's & 12's had the power and just assumed mine did when I purchased, since it has the power connection under the seat. __________________ Stillen CBE \| Berk HFC's \| Intake Plenum \| AAM UpRev Tune \| Swift Spec-R Springs \| H&R 15/20 Spacers \| 265/285's \| Stillen Sways \| 20% tint

08-10-2017, 07:26 AM	#7 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	Since the connector is there, you may be able to track down the other end and connect to power. FSM (link in my sig) has wiring diagrams, connector pinouts, wire colors, etc. Edit: There will probably be some relays that will need to be installed as the BCM cannot supply that much power. FSM should have details. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma Last edited by SouthArk370Z; 08-10-2017 at 09:37 AM.

08-11-2017, 08:18 AM	#10 (permalink)
slippery4678 Base Member Join Date: Jul 2010 Location: S. Jerz/Arlington VA Posts: 58 Drives: 2010 370z PG + sport Rep Power: 15	Found that the fuse and relay under the hood are there. There is one more relay according to the diagram behind the dash that I will be looking for today. If that's there, I'm out of ideas. Is there any place other than the dealer I should take it? Car audio shop or something? __________________ Stillen CBE \| Berk HFC's \| Intake Plenum \| AAM UpRev Tune \| Swift Spec-R Springs \| H&R 15/20 Spacers \| 265/285's \| Stillen Sways \| 20% tint

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
installing Touring seats in BASE/SPORT	martin82	Exterior & Interior	27	09-10-2016 04:12 PM
[FOR SALE] few items for sale, touring seats, base seats, cf fenders, stillen skirts, etc	martin82	Parts for sale (Private Classifieds)	33	04-25-2014 01:48 PM
WTT sport touring seats for 40th seats	kellyefields	Wanted	4	01-02-2013 06:49 PM
Touring Seats in Base?	6spd	Exterior & Interior	19	10-25-2011 12:11 AM